Instruction d'utilisation Metra Electronics 95-5818

Résumé du contenu de la page N° 1

INSTALLATION INSTRUCTIONS FOR PART 95-5818
APPLICATIONS
FORD
F-150 2004 Heritage / F-150 1997-2003
Expedition 1997-2002
F650 2005-2008
LINCOLN
Navigator 1997-2002/Blackwood 2001-2003
95-5818
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO Mounts Units Provision
NOTE: Major sub dash modifications
are necessary to use this dash kit. You
will need to trim the sub dash to gain
suitable depth and height.
KIT COMPONENTS
• A) & B) (2) Double Din Trim Plates • C) Double Din Brackets

Résumé du contenu de la page N° 2

95-5818 TABLE OF CONTENTS Dash Disassembly -150 2004 Heritage / F-150 1997-2003 / Expedition 1997-2002 / F650 2005-2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Lincoln -Lincoln Navigator 1997-2002 / Blackwood 2001-2003 . . . . . . . . . . . . . .1 Kit Assembly - Double DIN/Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . 2 *Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your in

Résumé du contenu de la page N° 3

95-5818 DASH DISASSEMBLY FORD F-150 2004 HERITAGE/F-150 1997-2003 EXPEDITION 1997-2002/ F650 2005-2008/ LINCOLN NAVIGATOR 1997-2002/BLACKWOOD 2001-2003 A 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove the panel sur- rounding the radio. (Figure A) 3 Using the Metra 86-5618 removal keys, slide the radio out of the radio cavity. Unplug and remove the radio. (Figure B) B 4 Remove the (4) 7 MM screws at the sides of the factory climate control

Résumé du contenu de la page N° 4

95-5818 KIT/FINAL ASSEMBLY DOUBLE DIN/STACKED ISO MOUNT UNIT(S) PROVISION *Note: Refer also to the instructions included with the aftermarket radio. NOTE: Major sub dash modifications are necessary to use this dash kit. You will need to trim the sub dash to gain suitable depth and height. A 1 Attach the double DIN brackets to the double DIN or stacked ISO Mount unit(s) using the screws supplied with the unit(s). (Figure A) B 2 Locate the factory wiring harness in A the dash. Metra recommends usi

Résumé du contenu de la page N° 5

95-5818 KIT/FINAL ASSEMBLY FINAL ASSEMBLY NOTE: Major sub dash modifications are necessary to use this dash kit. You will need to trim the sub dash to gain suitable depth and height. Continued from page 2. C 4 Slide the double DIN radio or stacked ISO Mount unit assembly into the mod- ified sub dash until it clicks into place. 5 Attach the appropriate double DIN trim plate using the top 2 screw positions of the climate control. (Figure C) 6 Reassemble the rest of the dash in reverse order of di

Résumé du contenu de la page N° 6

95-5818 NOTES 4

Résumé du contenu de la page N° 7

95-5818 NOTES 5

Résumé du contenu de la page N° 8

95-5818 INSTRUCTIONS www.metraonline.com 1-800-221-0932 REV. 06/08/10 © COPYRIGHT 2009-10 METRA ELECTRONICS CORPORATION INST95-5818