Résumé du contenu de la page N° 1
QLR0440 SERIES
Quick Start Guide
4 PORT PCI CARD
DIGITAL VIDEO RECORDER
NOTE:
PACKAGE CONTENTS:
1 x 4 Port Pci capture card QLr0444 includes:
1 x user’s Manuals 4 x cameras
1 x Quick Start Guide 4 x 60ft extension cables
1 x Software cd 4 x Power adaptors
4 x 4 PiN to rca convertor cables (acc425 - optional)
eNGLiSH reViSiON # r3
Résumé du contenu de la page N° 2
STEP 1 For detailed setup information, please refer to your User’s manual. Hardware Installation NOTE: Please turn off the computer’s power prior to installing the QLR Capture Card. If you are unfamiliar with installing PC hardware, it is recommended to have a PC technician perform the installation. 1. using a screw driver remove the 2. the picture shown is of a computer screws from the cover of your with its cover removed. computer. 3. insert the Pci capture card into an 4. Secu
Résumé du contenu de la page N° 3
STEP 2 Before you install a camera, carefully plan where and how you will position the camera, and where you will route the cables. Camera Installation NOTE: The 4 Port PCI card has 4 Video inputs, allowing you to connect up to 4 cameras (the instructions below apply to the cameras included with QLR0444). You may connect your own cameras, however please make sure to use a proper power adaptor NOT EXCEEDING 12V DC for each camera. 3. connect the rca Video end of the 1. connect the femal
Résumé du contenu de la page N° 4
STEP 3 VistaPro4 software CD includes both Video and Audio Drivers. It is recommended that you install the Video Driver first and follow the same steps to install the Audio driver. Driver Installation on Local Computer (Server) 1. Once you turn on your Pc after 2. choose “install from a list of 3. Select “Search for the best driver inserting the Pci card, Microsoft specific location (advanced)” in these locations” option. Select Windows™ will automatically option and pres
Résumé du contenu de la page N° 5
STEP 4 It is recommended to connect the cameras to your PC prior to installing the VistaPro4 software application VistaPro4 Software Installation on Local Computer (Server) 1. Browse to your cd drive and 2. Open to view the contents 3. double click to execute the open the VistaPro4 software. from within the install folder. Setup.exe file. 5. enter the necessary information 4. click “Next” and proceed with 6. choose “all components” option and press the “Next” button. the you
Résumé du contenu de la page N° 6
STEP 5 Register for Lorex DDNS Port Forward Your Router First before proceeding with the set-up. You must forward Ports: 2000, 2001, 2002, 2003 (TCP/IP). All routers are different. To port forward your router, please refer to your router’s user manual. A router configuration guide featuring the most commonly used routers in the market is available on www.lorexcctv.com/support in the Consumer’s Guide Section. 1. Retrieve System Information: 2. DDNS (Dynamic Domain Name 3. Create Account: S
Résumé du contenu de la page N° 7
STEP 6 Setup DDNS (on VistaPro4 Server Software) 1. double click on the “VistaPro4 Server” icon 2. in the “Setup” screen and from from your desktop to open the VistaPro4 Server under the “System” tab ensure that there is a check mark to “enable auto register to iP server” software and click on the “Setup” icon. You and click on the ddNS button to will now be asked to enter the user confirm “user enter the ddNS information you id” (admin by default) and “Password” (m
Résumé du contenu de la page N° 8
(continued) STEP 6 4. double click the VistaPro4 Server icon from your desktop to open it. You will see the live images if the cameras are connected. You will also see “iP registered” if your settings are right. if you see “iP failed”, please recheck your settings. Congratulations! You have completed Step 6 successfully. Your computer NOTE: Click “Unblock” is now ready to view, record when you see the and play back video remotely Windows XP™ Security using Lorex dd
Résumé du contenu de la page N° 9
STEP 7 (continued) NOTE: Please make sure that VistaPro4 Server Software is running while configuring the VistaPro4 Client Software. Enable DDNS (on VistaPro4 Client Software) 1. double click on the VistaPro4 2. On the “Select Setup System” 3. Once you press the “Ok” button, you screen and from under “System” will be prompted to enter “user client icon from your you will see “Local” selected by confirm” password. t ype “1111” desktop to open the client def
Résumé du contenu de la page N° 10
TIPS How to Connect BNC Cameras (not included) BNC Male to RCA Female Connector Kit (Model BNC-4PK) You can order the connector kit from our website at www.lorexcctv.com Camera with BNC Connector BNC Male to RCA Female Connector RCA Male to Male cable BNc cameras require BNc Male to Female connector & rca Male to Male cable to connect to the VistaPro4 Pci card. 2. connect the rca cable. 1. connect BNc female 3. connect the other end of 4. connect your camera Power end of the camera to
