Résumé du contenu de la page N° 1
9 CHANNEL MULTIPLEX
DIGITAL VIDEO RECORDER
Instruction Manual
English Version1.0
MODEL:
DGN209
www.lorexcctv.com
Copyright © 2006 LOREX Technology Inc.
Résumé du contenu de la page N° 2
Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or part without the prior written consent of Lorex Technologies Inc., except in the manner described in the documentation. © Copyright 2006 Lorex Technologies Inc. 300 Alden Road Markham, Ontario L3R 4C1 CANADA All rights reserved. THIS DEVICE COMPLIES WITH PART 15 OF THE FC
Résumé du contenu de la page N° 3
Table of Contents Important Safety Instructions........................................................................................................................................................5 Introduction ..................................................................................................................................................................................6 Features ............................................................................................
Résumé du contenu de la page N° 4
Appendix 1: Installing the HDD ..................................................................................................................................................45 Appendix 2: Connection Diagram to Cameras and Monitor .......................................................................................................47 Appendix 3: Pin Configurations ...............................................................................................................................
Résumé du contenu de la page N° 5
Important Safety Instructions All the safety and operating instructions should be read before operating this equipment. The improper operation may cause irreparable damage to the appliance. Lift and place this equipment gently. Do not expose this equipment to direct sunlight. Do not use this equipment near water or in contact with water. Do not spill liquid of any kind on the equipment. Do not unplug the power connector before turning the power off correctly. This equipment should
Résumé du contenu de la page N° 6
Introduction The DXR209 combines a 9 channel multiplexer with a Digital Video Recorder (DVR). The DVR offers many advantages over traditional time lapse VCR’s, allowing you to quickly access and search for a specific time segment or event, which has been recorded. This high quality recorded video can be viewed at various playback speeds as well as frame-by-frame with the Jog Button feature. To learn more about Lorex products, please visit our website at www.Lorexcctv.com Features
Résumé du contenu de la page N° 7
System Contents The DXR209 box should include the items listed below. Please take a moment to verify that no items are missing from the package. DXR209 Digital Video Recorder 80 GB Hard Disk Drive is included 2 Keys for Installation / User Manual Power Adapter and Cord Hard Drive Cartridge NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE. Getting Started If the purcha
Résumé du contenu de la page N° 8
Front Panel Controls 18 18 17 17 16 16 15 15 14 14 13 13 SLOW SLOW Up Up AVC AVC 776 776 Digit Digital Multiple al Multiplex Reco x Recorder rder 1 1 23 23 44 55 6679 79 8 8 Le Lef ft t Ri Righ ghtt REC REC ME MENU NU ENTER ENTER SELECT SELECT ZO ZOO OM M Dow Down n POW POWE ER R 10 10 11 11 12 12 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 1. REMOVABLE HDD CARTRIDGE Please refer to Appendix #1. 2. LED INDICATORS These LED Lights are ON under the following
Résumé du contenu de la page N° 9
UP: When in the setup mode, it works as an Up directional button. 15. PLAY Press PLAY to playback the most recently recorded video. 16. REW / Left REW: Under DVR play mode, it can play video backward at different speeds. (Press REW again to adjust speed as 1, 2, 4, 8, 16, 32 times) Left: When in the setup mode, it works as Left directional button. 17. SLOW Press to slow down the playback speed. 18. CAMERA SELECT (1-9) Press the Camera Select (1-9) to select spe
Résumé du contenu de la page N° 10
Back Panel Connections 10 9 8 7 1 2 3 4 5 6 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to an Alarm Block. (see Appendix #3 for more info) 3. 75/HI When using the LOOP function, allows for HI impedance
Résumé du contenu de la page N° 11
Accessing the Main Menu The Menu allows you to configure your DVR settings and program various recording options. Follow these steps in order to access the Menu: Password: 0000 Press the MENU button. The password screen will appear: The default Password is 0000. To change the number of the Password, use the ◄ / ► buttons to scroll left and right between numbers, and use the ▲ / ▼ buttons to change the value of the number that is flashing. Press the ENTER button once the
Résumé du contenu de la page N° 12
The following options are available in the Search Menu: ►Last Record Last Record Full List This feature is used to play the last recorded piece of video. Alarm List Motion List Time Search • In the Search menu, press ▲ / ▼ to scroll to the Last Record option, then press ENTER. • The last recorded video will begin playing. Full List This feature is used to choose from a listing of all recorded video on the HDD sorted by time. 1. In the Search menu, press
Résumé du contenu de la page N° 13
Timer Recording Setup On the Main Menu, selecting the Timer option will allow you to set daily schedules in which you would like the DVR to automatically record. (Menu) Search Pressing ENTER after scrolling to the Timer option will bring up the following menu options: ►Timer Record Camera Timer System Event (Timer) Network Day Start End QUALITY IPS Example: If you want to record from Daily 01:00 02:00 BEST 25A Tuesday at 8 pm (21:00) to SUN
Résumé du contenu de la page N° 14
Record Settings On the Main menu, selecting the Record option will allow you to set the quality and speed of (Menu) recordings. Search Timer Pressing ENTER after scrolling to the Record option will bring up the following menu ► Record options: Camera System (RECORD) Event HDD Overwrite: NO Network Record IPS: 25A Record Quality: Normal Alarm Rec IPS: 25A Alarm Rec Quality: Normal Motion Trigger Record: ON HDD Overwrite Setup 1. Press ENTER to confirm HDD
Résumé du contenu de la page N° 15
Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press ▲ / ▼ to toggle the option between ON and OFF. 1. Select “ON” to set up the motion trigger recording: It can automatically switch from stand-by mode to Recording Mode. The motion detection will change the scanning sequence and show “D” on the monitor. NOTE: The trigger recording time will depend on the ALARM DURATION mode setting. It will record from the last trigger
Résumé du contenu de la page N° 16
Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time camera channel (1-9), then press ENTER. 2. Press ◄ / ► to select the Record Method feature on the screen. 3. Press ▲ / ▼ to select EVENT/ NORMAL/ OFF on the screen. EVENT: When the alarm input is triggered, the DVR will increase the recording time to that channel. i.e. the normal record sequence for cameras is Camera 1, Camera 2, Camera 3 etc.
Résumé du contenu de la page N° 17
Motion Detection The Motion Detect feature provides a visual indication on the monitor when movement is detected in the picture. Also, if the ‘Motion Trigger Record’ option is enabled in the ‘Record’ menu, recording will activate on all cameras when motion is detected. Use the steps below to enable/disable the detection zones for each camera. Press MENU to enter the menu set up, then ▼ to CAMERA setup. Press ENTER twice to enter the Motion Detection setup. Each screen displays t
Résumé du contenu de la page N° 18
Figure 1-1 MOTION DETECTION SETUP – 1~9 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-2 MOTION DETECTION SETUP – LINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032
Résumé du contenu de la page N° 19
System Setup The System menu is used to configure the system level options on the DXR209. To access the System features, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the ‘System’ option and press ENTER. (SYSTEM) o Audio Input: 1 Int Audible Alarm: ON Ext Audible Alarm: ON Motion Audible Alarm: ON Alarm Duration: 10 SEC Dwell Time: 02 SEC Message Latch: NO Title Display: ON Time Display: Y/M/D 2003-JAN-02 (THU) 17:37:09 New Password: XXXX
Résumé du contenu de la page N° 20
4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit. Setting the Motion Audible Alarm feature If enabled, the buzzer will sound if the video Motion Detect Feature is set and motion is detected. 1. On the System screen, press ▲ / ▼ to select Motion Audible Alarm, then press ENTER. 2. Press ▲ / ▼ to enable or disable the Motion Audible Alarm. Options are: ON = Buzzer will sound when motion is detected. OFF = The buzzer will remain silent when motion is dete
