Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
TP-S1016DR
TP-S1 0 9DR
Digital Video Recorder
Résumé du contenu de la page N° 2
Safety Precautions CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage
Résumé du contenu de la page N° 3
Safety Precautions Safety Precautions Warning: The lightning flash with an arrowhead symbol, within an Electrostatic-sensitive device. Use proper equilateral triangle, is intended to alert the user to the CMOS/MOSFET handing precautions to avoid presence of uninsulated ” dangerous voltage” within the electrostatic discharge. product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons UNPACKING Unpack carefully. The exclamation point within an
Résumé du contenu de la page N° 4
Important Safeguards Important Safeguards Read Instruction---All the safety and operating instructions should be read before the init is operated Retain Instructions---The safety and operating instructions should be retained for future reference. Heed Warnings—All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions—All operating and use instructions should be followed Cleaning—Unplug the unit from the outlet before cleaning. Do not use liquid cleaners
Résumé du contenu de la page N° 5
Table of Contents 1. Product Overview…………………………………….………………..…..…..Page 1 1.1 Main features………………………………………………………………….....…..….1 1.2 Specifications………………………………………………………………..…………..2 2. Back panel connections……………………………………………......………3~4 3. System connection………………………….………………………………………..5 Before installation……..……………………………………………………………………..5 4. Front panel keypads……………………………………………….…………..…6~7 5. Operation…………………………………………………………..……………………..8 6. Menu flow………………………………………………………..…………………...9~10 6.1 Clock set
Résumé du contenu de la page N° 6
Product Overview 1. Product Overview The TP-S109DR/TP-S1016DR Duplex Digital Video Recorder (DVR) a full-featured DVR designed specifically for use in security industry. The DVR incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded images make the DVR stand out from the competition as the best choice for security surveillance. The 16 (in) x 5 (out) Matrix O
Résumé du contenu de la page N° 7
Specifications 1.2 Specifications Video Format NTSC/PAL Video Input 9 (TP-S109DR) / 16 (TP-SI016DR) camera inputs (BNC),1Vp-p/75ohm Video Output 1 BNC video out (1Vp-p/75 ohm) for Main Monitor 1 S-Video out Mini DIN for Main Monitor 5 BNC video out (1Vp-p/75 ohm) for Matrix / CALL Monitor output 9 (TP-S109DR) / 16 (TP-SI016DR) video out (1Vp-p/ 75 Ohm)for looping Video Compression M-JPEG Recording Resolution 720x484 (NTSC); 720x576 (PAL) Compact Flash Memory built-in Compact Flash card slot
Résumé du contenu de la page N° 8
Back Panel Connections 2. Back Panel Connections 5 1 2 4 3 10 12 13 9 11 7 6 8 ON/OFF: Main on/off switch. 1 2 AC100~240V power socket. 3 VIDEO IN: BNC-sockets for composite signal video inputs, automatic 75 Ohm termination (TP-S109DR: 1 ~ 9, TP-S1016DR-1600: 1 ~ 16). 4 VIDEO OUT: Loop through video outputs for each input channel. (TP-S109DR: 1 ~ 9, TP-S1016DR-1600: 1 ~ 16) 5 CALL MONITOR: BNC-socket Call (Spot) Monitor, composite signal. (Full screen display only) MAIN MONITOR: BNC
Résumé du contenu de la page N° 9
Back Panel Connections 9 ALARM I/O: (Refer pin assignment in Appendix-C, Page 44) ALM-INPUT : Normally Open (N.O) or Normally Close (N.C) type alarm sensor input. The Alarm Input can be selected as N.O or N.C input in the setup menu. When an alarm occurs, alarm recording will automatically start. ALM-OUTPUT : Two-way contact relay alarm output. In normal condition, this N.C. contact shorted to ALM-COM. In alarm status, it is open between ALM-NC and ALM-COM, N.O. is shorted to ALM-COM. 10 R
Résumé du contenu de la page N° 10
System Connection 3. System Connection The installations described below should be made by qualified service personnel or system installers. Before Installation Please refer to the following diagram for the system connections. TP-S109DR: Camera 1~9 / TP-S1016DR: Camera 1 ~ 16 ~ Alarm In/Out Audio Input RS232 Ethernet (camera Audio Out) Audio Out (To Speaker) RS485 Remote Keyboard(s) MAIN Monitor CALL Monitor KS-KBJ / KS-KBK (optional) 5
Résumé du contenu de la page N° 11
Front Panel Keypads 4. Front Panel Keypads 12 12 2 1 11 10 11 10 22 19 2 1 8 3 4 22 9 8 7 6 5 3 4 13 14 15 16 17 18 19 20 21 18 9 6 5 17 20 21 7 16 15 14 13 1 SHUTTLE Ring and JOG Dial SHUTTLE : In Playback mode, turn the shuttle ring to fast forward/rewind the picture (600X maximum). In Pause mode, turn the shuttle dial to slow forward/rewind the picture (1/32 maximum). JOG : In Pause mode, turn the jog dial to step forward/rewind the Picture. 2 In Menu mode turn the jog dial to
Résumé du contenu de la page N° 12
Front Panel Keypads In Full screen mode this menu allows color adjustment for each video channel, all channels are separately adjustable. The selected item will show in red color bar. Use JOG to increase or decrease the value. Press ENTER to confirm and move to next item. After finished setting, press SELECT key to discard change or press MENU key to save and exit the dialog. In Multi-screen mode: In Multi-screen mode the SELECT key allows to define cameras in all multi-screen views. Press
Résumé du contenu de la page N° 13
Operation 5. Operation (1) Insert a HDD (IDE) for Video Storage Insert one or two HDD (3.5” IDE) for Video Storage. The HDD should be set as Cable Select. (Normally the default setting of HDD is Master) Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position.Otherwise, HDD will not be detected. ATTENTION: Changing HDD s and switching on HDD s is not allowed in record mode! (2) Connect cable for video/audio input and video/audio out,
Résumé du contenu de la page N° 14
MENU flow 6. MENU FLOW Columns in brackets () only valid forTP-S1016DR TITLE MOTION CLOCK ( See page 14 ) ( See page 17 ) ( See page 11 ) TITLE SETTING MENU CH OP SEN DURATION CLOCK SETTING MENU CH TITLE 1 CH01:_ _ _ _ _ : 2003/07/04 FRI 1 ON HIGH 07 SECS DATE 2 CH02:_ _ _ _ _ : 13:01:02 2 ON HIGH 07 SECS TIME 3 CH03:_ _ _ _ _ 3 ON HIGH 07 SECS 4 CH04:_ _ _ _ _ 4 ON HIGH 07 SECS 5 CH05:_ _ _ _ _ MENU LANGUAGE: ENGLISH 5
Résumé du contenu de la page N° 15
MENU flow Columns in brackets () only valid forTP-S1016DR MATRIX MATRIX CONTROL SUB-MENU ( See page 24 ) ( See page 21) MONITOR-3 SETTING MENU MATRIX SETTING MENU CH DWELL EVENT CONTROL SETTING MENU 1 07 SECS NONE MONITOR-0 2 07 SECS NONE MONITOR-1 3 07 SECS NONE RS232 BAUD RATE : 9600 BPS MONITOR-2 4 07 SECS NONE : 1 RS232 STOP BIT MONITOR-3 5 07 SECS NONE RS232 PARITY : NONE MONITOR-4 6 07 SECS NONE RS23
Résumé du contenu de la page N° 16
MENU 6.1 CLOCK SETTING MENU CLOCK SETTING MENU : 2003/07/04 FRI DATE : 13:01:02 TIME : ENGLISH MENU LANGUAGE : NTSC VIDEO SYSTEM VERSION: 0.79 11/23 In CLOCK/LANGUAGE SETTING MENU , we define: (1) DATE : Current date, format: YYYY/MM/DD Year: 2000 ~ 2099, Month: 01~ 12, Date: 01~31, Week: Sunday~Saturday (2) TIME : Current time, format: HH:MM:SS Hour: 00 ~ 23, Minute : 00 ~ 59, Second: 00 ~ 59 (3) MENU LANGUAGE: ENGLISH or Others (4) VIDEO SYSTEM: Factory default setting depe
Résumé du contenu de la page N° 17
MENU 6.2 TIMER SETTING MENU TIMER SETTING MENU WEEK START STOP SPEED SET SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS
Résumé du contenu de la page N° 18
MENU 6.3 SEQUENCE SETTING MENU SEQUENCE SETTING MENU CH OP DWELL 1 ON 03 SECS 2 ON 03 SECS 3 ON 03 SECS 4 ON 03 SECS 5 ON 03 SECS 6 ON 03 SECS 7 ON 03 SECS 8 ON 03 SECS 9 ON 03 SECS (10 ON 03 SECS) (11 ON 03 SECS) (12 ON 03 SECS) (13 ON 03 SECS) (14 ON 03 SECS) (15 ON 03 SECS) (16 ON 03 SECS) Columns in brackets () only valid forTP-S1016DR In the SEQUENCE SETT
Résumé du contenu de la page N° 19
MENU 6.4 TITLE SETTING MENU TITLE SETTING MENU CH TITLE 1 CH01:_ _ _ _ _ 2 CH02:_ _ _ _ _ 3 CH03:_ _ _ _ _ 4 CH04:_ _ _ _ _ 5 CH05:_ _ _ _ _ 6 CH06:_ _ _ _ _ 7 CH07:_ _ _ _ _ 8 CH08:_ _ _ _ _ (9 CH09:_ _ _ _ _ (10 CH010:_ _ _ _ _ ) (11 CH011:_ _ _ _ _ ) (12 CH012:_ _ _ _ _ ) (13 CH013:_ _ _ _ _ ) (14 CH014:_ _ _ _ _ ) (15 CH015:_ _ _ _ _ ) (16 CH016:_ _ _ _ _ ) Columns in brackets () only valid forTP-S1016DR In TITLE
Résumé du contenu de la page N° 20
MENU 6.5 COVERT SETTING MENU COVERT SETTING MENU CH OP 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF 9 OFF (10 OFF) (11 OFF) (12 OFF) (13 OFF) (14 OFF) (15 OFF) (16 OFF) Columns in brackets () only valid forTP-S1016DR In COVERT SETTING MENU , we define: The covert setting menu allows you hide the desired camera on the display in a blue background. Change setting to ON for covering camera. Camera is not visible in Live
