Résumé du contenu de la page N° 1
User Manual
ECOR264-D2 DVR Series
ECOR264-D2 DVR Series
Résumé du contenu de la page N° 2
EVERFOCUS ELECTRONICS CORPORATION ECOR264-D2 DVR Series Instruction Manual 2010 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: September 2010 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Cor
Résumé du contenu de la page N° 3
Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation openings or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There
Résumé du contenu de la page N° 4
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a
Résumé du contenu de la page N° 5
WEEE This Product is RoHS compliant. The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products. Therefore, all specifications are subject to change without prior notice. Manufacturer is not responsible for misprints or typographical errors. Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.
Résumé du contenu de la page N° 6
TABLE OF CONTENTS 1 PRODUCT OVERVIEW ..................................................................................................... 1 1.1 FEATURES....................................................................................................................... 1 1.2 PACKAGE CONTENTS................................................................................................... 2 1.3 SPECIFICATIONS...........................................................................
Résumé du contenu de la page N° 7
3.6 PTZ.................................................................................................................................. 23 3.6.1 General PTZ control (if PTZ cameras are installed)..................................................................................23 3.6.2 Express Control of PTZ.........................................................................................................................24 3.7 LAYOUT...................................................
Résumé du contenu de la page N° 8
4.10.2 Daylight Saving .....................................................................................................................................82 4.10.3 User.......................................................................................................................................................83 4.10.4 I/O Control ............................................................................................................................................86 4.10.5 Mi
Résumé du contenu de la page N° 9
Chapter 1 1 PRODUCT OVERVIEW The introduction of the ECOR264 D2 series adds the advantages of H.264 compression to the power and flexibility of the already popular ECOR DVR. State of the art H.264 compression techniques enhance recorded video storage capacity and conserve network transmission bandwidth while maintaining high image quality. Both the 4 and 8 camera models are capable of real time recording (4x30FPS@2CIF, 8x30FPS@CIF). Plus, the ability to independently configure image res
Résumé du contenu de la page N° 10
-Express Setup: A unique menu option for quick & easy installation and setup -Express Archive: Archive video instantly (to USB) while playing back -Express Playback: Simply point, click and drag the playback bar to view desired recordings -Express Search: Use the intuitive playback bar with simple drag & drop operations -Smart Search: Review recorded video to identify motion in area(s) of interest -Snapshot search: choose an interval and direction, view a series of snapshots to quickly is
Résumé du contenu de la page N° 11
1.3 SPECIFICATIONS ECOR264-4/8D2 Channel Number 4 8 Compression Format H.264 Recording Rate/Resolution 60 NTSC / 50 PAL (D1) 60 NTSC / 50 PAL (D1) *Total = 240 FPS @ CIF; per camera 120 NTSC / 100 PAL (Half D1) 120 NTSC / 100 PAL (Half D1) resolution & FPS rates can be set 120* NTSC / 100 PAL (CIF) 240 NTSC / 200 PAL (CIF) independently up to the total capacity Playback Rate/Resolution 60 NTSC / 50 PAL (D1) 60 NTSC / 50 PAL (D1) Playback up to full record rate. 120 NTSC /
Résumé du contenu de la page N° 12
1.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the manual will refer to them often. 2 3 4 5 6 7 ○ ○ ○ ○ ○ ○ 1 ○ 15 ○ 16 ○ 17 ○ 18 ○ 8 ○ 14 9 ○ ○ 10 13 11 12 ○ ○ ○ ○ Figure 1-1 Front Panel 1) DVD+RW: DVD+RW burner for DVD model. (D models only) 2) ◄◄/ ◄I : Fast reverse playback or step re
Résumé du contenu de la page N° 13
1 ○ Press channel key (CH1~CH8) / (CH1~CH4) to display that channel in full screen view. 2 ○ Press channel key again for 2x electronic zoom. Zoom screen can be moved through arrow keys. Pressing the channel key again switches the electronic zoom off and return to full screen view of that channel. 10) Live: Press this key to show live view. Press to exit from playback mode. 11) View: Press this key to switch between 4x, PiP (Picture In Picture), full screen and 9x. 1 Note: ○ PI
Résumé du contenu de la page N° 14
1.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel. 4 5 7 ○ ○ ○ 6 8 ○ ○ 1 ○ 2 ○ 3 ○ 12 ○ 9 10 ○ ○ 11 ○ Figure 1-2 Rear Panel 1 ○ Alarm In: Connect up to 4/8 alarm inputs, selectable between N.O./N.C. contacts. 2 ○ Alarm Out: N.C or N.O type alarm out (form “C”). 3 ○ Audio In: Connect line level output of an audio preamplifier to the audio input connection corresponding to the
Résumé du contenu de la page N° 15
10 ○ RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices 11 ○ Audio Out: Connect to the line level input of an audio amplifier. 12 ○ VGA: Connect a VGA monitor to the VGA output connection. VGA resolution is 1280x1024. 7
Résumé du contenu de la page N° 16
1.6 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC connectors. To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm foil shield antenna cable and other types of coaxial cable are not compatible. All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal. When converting other transmission types (twist
Résumé du contenu de la page N° 17
Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact in idle state in idle state All settings are programmed in the ALARM menu (Section 0). 1.8.2 Alarm Output Relay The relay output provides either Normally Open or Normally Closed dry contacts. Output relay in idle state 1.9 RS-485 keyboard / PTZ Installation All functions can be remote-controlled by the EKB-500 universal keyboard. Using the EEPbus protocol, digital video
Résumé du contenu de la page N° 18
RS-485 bus serial wiring with connector boxes and connection cable Direct RS-485 bus star wiring is not supported unless using an EverFocus Model EDA997A (see below). Improper RS-485 bus star wiring An EDA997A RS-485 signal distributor may be used to use a star wiring configuration. Star wiring with RS-485 signal distributor A RS-485 distributor can also be used to increase the maximum number of devices on the bus as well as the total range. Each distributor output prov
Résumé du contenu de la page N° 19
ATTENTION: EDA997A signal distributors are unidirectional! This means that the signal only flows from the input towards the outputs. Therefore, e.g. the interconnection of several keyboards is not possible with these types of signal distributor! 1.9.2 RS-485 socket pin assignment The RS485 pin assignment is as follows: + I 1.9.3 EKB-500 connection with network patch cable For a simple, short distance installation, recorder and keyboard can be connected directly using a stand
Résumé du contenu de la page N° 20
1.10 USB-Mouse installation Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear USB V1.0 port is recommended to reserve the higher speed front USB V2.0 port for video copy/export. NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless USB mouse is not supported. 1.11 NETWORK CONNECTION This section only describes physical connection to an Ethernet network. This step must be completed before the
