Résumé du contenu de la page N° 1
DVD-P191K
DVD Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your
product at
www.samsung.com/global/register
AK68-01777D
Résumé du contenu de la page N° 2
precautions occurs, leave the player at room tempera- 1. Setting up ture until the inside of the player becomes - Refer to the identification label located on dry and operational. the rear of your player for its proper operat- ing voltage. - Install your player in a cabinet with ade- 4. Disc quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the compo- - Do not clean disc using record-cleaning nents for air circulation. sprays, benzene, thinner, or other volatile sol
Résumé du contenu de la page N° 3
before you start table of contents Accessories Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Check for the supplied accessories below Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disc Type and Characteristics . . . . . . . . . . . . . . . .5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Tour of the Remote Control . . . . . . . . . .
Résumé du contenu de la page N° 4
setup Note General Features - Discs which cannot be played with this player. • DVD-ROM • DVD-RAM Excellent Sound Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduc- • CDI • CVD tion. • CDGs play audio only, not graphics. - Ability to play ba ck may depend on recording Screen conditions. Both regular and widescreen(16:9) pictures can be • DVD-R, +R viewed. • CD-RW Slow Motion • DVD+RW, -RW (V mode) An important sce
Résumé du contenu de la page N° 5
● SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 12 Cm video due to Dolby Digital and MPEG- Double-sided 480 min. Audio 2 system. + - Various screen and audio functions Video Single-sided 80 min. can be easily selected through the on- 8 Cm Double-sided 160 min. screen me
Résumé du contenu de la page N° 6
setup Description Front Panel Controls 2 3 4 5 1 6 4. DISPLAY 1. POWER ON/OFF ( ) Operation indicators are displayed here. Turn on/off and the player is turned on/off. 2. DISC TRAY 5. OPEN/CLOSE ( )/STOP ( ) Place the disc here. Press to open and close the disc tray / stops disc play. 3. MIC 6. PLAY/PAUSE ( ) Connect Microphone for karaoke functions. Begin or pause disc play. Front Panel Display Total playing time/Displays various messages concerning operations such as PLAY, STOP, LOAD
Résumé du contenu de la page N° 7
● SETUP Rear Panel 2 3 1 1. AUDIO OUT JACKS - If P-SCAN Video Output is selected in Setup Menu, - Connect to the Audio input jacks of your television or progressive scan mode will work. audio/video receiver. - If I-SCAN Video Output is selected in Setup Menu, interlaced scan mode will work. 2. VIDEO OUT JACK - Use a video cable to connect to the Video input jack 4. DIGITAL AUDIO OUT JACKS on your television. - Use either a coaxial digital cable to connect to a com- patibl
Résumé du contenu de la page N° 8
setup 1. DVD POWER Button Tour of the Remote Control Turns the power on or off. 2. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. 3. DISC MENU Button Brings up the Disc menu. 4. BOOKMARK Quickly find bookmark sections of a DVD. 1 11 5. STOP Button ( ) 2 12 6. SKIP Buttons ( ) / 13 Use to skip the title, chapter or track 3 7. MENU Button 14 4 Brings up the DVD player’s menu. 15 8. ENTER/ π † √ ® Buttons / , / 5 16 This button functions as a toggle swit
Résumé du contenu de la page N° 9
● CONNECTIONS connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) 1 Using video/audio cables, connect
Résumé du contenu de la page N° 10
connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio B R signals are delivered through the audio output.) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of T
Résumé du contenu de la page N° 11
● CONNECTIONS Connection to a TV (Progressive) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. WHITE 2 BLUE GREEN Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the RED DVD player and TV. RED 3 Component cable Audio Cable Press the input selector on your TV remote control until the Compone
Résumé du contenu de la page N° 12
connections Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 WHITE Using the video signal cable(s), connect the VIDEO, COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. RED 3 Turn on the DVD player, TV, and Amplifier. Audio Cable RED WHITE 4 Pr
Résumé du contenu de la page N° 13
● CONNECTIONS Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. 3 Turn on the DVD player, TV, and Amplifier. Coaxial Cabl
Résumé du contenu de la page N° 14
basic functions 6. Pausing Play Playing a Disc Press the PLAY/PAUSE ( ) on the remote control during play. Before Play - Screen stops, no sound. - Turn on your TV and set it to the correct Video To resume, press the PLAY/PAUSE ( ) button once Input by pressing TV/VIDEO button on the TV again. remote control. 7. Step Motion Play (Except CD) - If you connected an external Audio System, turn Press the SKIP ( ) button on the remote control during on your Audio Syst
Résumé du contenu de la page N° 15
● BASIC FUNCTIONS Note Using the Search and Skip Functions To access the desired title when there is Title more than one in the disc. For example, if During play, you can search quickly through a chapter or there is more than one movie on a DVD, each movie will be identified. track, and use the skip function to jump to the next selection. Searching through a Chapter or Track Most DVD discs are recorded in chapters Chapter so that you can quickly find a specific pas- During play, press the
Résumé du contenu de la page N° 16
basic functions Using the Title Menu Using the A-B Repeat function 1. Press the REPEAT A-B button at the point where you 1. During stop mode, press the MENU button on the remote want repeat play to start (A). control. 2. Press the REPEAT A-B button at the point where you 2. Press the π/† buttons to select Title Menu, then press the want the repeat play to stop (B). ® or ENTER button. 2. To return to normal play, press CANCEL button again. Press ENTER key for Title Menu DVD/
Résumé du contenu de la page N° 17
● ADVANCE FUNCTIONS advance functions If you are using a 4:3 TV Adjusting the Aspect Ratio (EZ View) For 16:9 aspect ratio discs - 4:3 Letter Box To play back using aspect ratio Displays the content of the DVD title in 16:9 aspect ratio. The (DVD) black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan 1. During play, press the INFO button on the remote control. The left and right portions of the screen are cut off and the 2. Press the π/† buttons to s
Résumé du contenu de la page N° 18
advance functions MPEG4 Note Press AUDIO / √ button at remocon repeatedly to AUDIO PCM 1/2 - This function depends on what subtitles are encoded on select the desired Audio the disc and may not work on all DVDs. on MPEG4 then press the - A DVD disc can contain up to 32 subtitle ENTER. languages. 2. To remove the AUDIO icon, press the CANCEL or RETURN - To have the same subtitle language come up whenever button. you play a DVD; Refer to “Using the Subtitle La
Résumé du contenu de la page N° 19
● ADVANCE FUNCTIONS DVD Bookmark Enter Shortcut VCD Bookmark Enter Shortcut 2x 3. Press the √/® buttons to select Bookmark, then press the ENTER button. 4. When you reach the scene you want to mark, press the ENTER button. Up to three scenes may be marked at a time. Clips Menu for MP3/WMA/ 1 - - JPEG/MPEG4/CD Audio CD Audio or discs with MP3/WMA/JPEG/MPEG4 Note - Depending on a disc, the Bookmark function may contain individual songs and/or pictures that can be not work. orga
Résumé du contenu de la page N° 20
advance functions - Random: Song files which have the same extension will be Folder Selection played in random order. The folder can be selected in Stop or Play mode. To resume normal play, press the CANCEL button. - To select the Parent Folder Press the RETURN button to go to parent folder, or press CD-R MP3/WMA file the π/† buttons to select “..” and press ENTER to go to the When you record MP3 or WMA files on CD-R, please refer parent folder. to the following. - To
