Instruction d'utilisation Philips MCD908/93

Résumé du contenu de la page N° 1

2
User Manual
1
Quick Start Guide
MCD 908
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
3
1
2
Remote control with two
Composite Video Cable
Control Cable
AAA batteries
Quick start guide
FM and MW antennas
User manual
MCD908 QUG_Eng-98 1 2006.10.24, 9:02

Résumé du contenu de la page N° 2

1 Connect the speaker cables. 2 Connect the MW and FM antennas. Tips – See the User Manual for other TV 3 connection options. Connect the control cable. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV. AC power MW antenna FM antenna Speaker Speaker (right) (left) STOP STOP Setting up the TV 1 Press SOURCE (DISC on the remote) to select disc sou

Résumé du contenu de la page N° 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive s

Résumé du contenu de la page N° 4

Playing a disc 1 Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press STOP9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG on the remote for more than two seconds to program all available stations i