Instruction d'utilisation Philips MCD708/93

Résumé du contenu de la page N° 1

1
Quick Start Guide
2
User Manual
MCD 708
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Composite video and audio
Remote control with two
cables
Control Cable
AAA batteries
(yellow, white, red)
FM and MW antennas
Quick start guide User manual
MCD708 QUG_Eng 1 2005.9.6, 15:48

Résumé du contenu de la page N° 2

1 Connect the speaker cables. 2 Connect the MW and FM antennas. Tips – See the User Manual for other TV 3 Connect the control cable. connection options. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the composite video and audio cables to a TV. 5 Connect the power cords of the system and TV. AC power FM antenna 5 2 MW antenna 4 Speaker Speaker OOFER (right) (left) LINE OUT 1 2 3 SUB WOOFER 1 Setting up the TV 1 Press SOURC

Résumé du contenu de la page N° 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive s

Résumé du contenu de la page N° 4

Playing a disc 1 Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. 2 OPEN•CLOSE Load in a disc with the label side facing up. 3 Playback will start automatically. If not pressÉÅ. 4 To stop playback, press PRESET-/9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG on the remote for more than two seconds to program all available