Instruction d'utilisation Philips MCD268/93

Résumé du contenu de la page N° 1

2
User Manual
1
Quick Start Guide
MCD 268
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Pull out the plastic
protective sheet
USB/AUX before use.
DIM
A/V cord (R/W/Y)
Stand Remote Control
FM wire antenna Quick start guide
User manual
MCD268 QSG_Eng-93 1 2008.3.10, 14:45

Résumé du contenu de la page N° 2

1 Connect the speaker (subwoofer) cables. Tips – See the User Manual for other TV 2 connection options. Connect the FM antenna. –For connecting to a Progressive Scan TV, refer to the user manual for proper 3 connections and detailed setup. Connect the A/V cord to a TV. –Never connect the AC power cord before connection of the DIN cable to avoid causing any damage to the set. 4 Connect the power cords of the system and TV. AC power S-VIDEO IN AUDIO TV IN IN VIDEO IN 4 AUDIO S-VIDEO IN TV IN IN VI

Résumé du contenu de la page N° 3

Setting the clock 1 In standby mode, press and hold CLOCK on the system. 2 When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the hours. 3 Press CLOCK again and the minute digits flash. Then press VOLUME-/+ (VOL+/- on the remote) to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected

Résumé du contenu de la page N° 4

P r i n t Playing a disc 1 Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of waveband. 3 Press PRESET ¡