Instruction d'utilisation Philips MCD177/93

Résumé du contenu de la page N° 1

1
Quick Start Guide
2
User Manual
MCD177
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remove the plastic
protective sheet
Remote control with
AV cables (Y/W/R) Quick Start Guide
battery
Power adaptor FM antenna User Manual
MCD177_98_QSG_Eng 1 3/19/08, 16:59

Résumé du contenu de la page N° 2

1 Connect the speaker cables. 2 Connect the FM antenna. Tip 3 See the User Manual for other TV Connect the composite video cable (yellow, supplied) to a TV. connection options. 4 Connect the power cords of the system and TV. Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or FM for example). – Then select the desired function ( 2;, í, A ë for example). Y PB PR FM wire antenn

Résumé du contenu de la page N° 3

Setting the clock 1 In standby mode, press and hold DISPLAY/CLOCK. The clock digits flash on the display panel. 2 Press TUNING à / á (or à / á on the remote control) to set the hours. 3 Press í/ ë to set the minutes. 4 Press PROG to select between 12 hour and 24 hour display. 5 Press DISPLAY/CLOCK agian to store the setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the video cables are not connec

Résumé du contenu de la page N° 4

Playing a disc 1 Press OPEN•CLOSE 0 to open the disc door and load in a disc, then press the same button again to close the disc door. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (FM on the remote control) to select tuner source. 2 Press PROG for more than two seconds to program all available stations in order of waveband. 3 Press í/ ë until the desir