Résumé du contenu de la page N° 1
OWNER'S MANUAL
MANUAL DE INSTRUCCIONES
DVD PLAYER/Hi-Fi VIDEO CASSETTE RECORDER
DVD COMPACTOS/VIDEOGRABADOR Hi-Fi ESTEREO
MVD4540B
ATTENTION
ATENCION
If you purchase a universal remote control from your local retailer, please contact
the remote manufacturer for the required programming code.
Si usted a comprado un control de remoto universal, por favor comunicace con el
fabricante para el codico de programaccion requerido.
TV/CATV MODE SELECTION
SELECCION DE MODO DE TV/CATV
When shipped from the
Résumé du contenu de la page N° 2
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence RISK OF ELECTRIC SHOCK of uninsulated dangerous voltage within DO NOT OPEN the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral SHOCK, DO NOT REMOVE COVER (OR triangle is intended to alert the user to BACK). NO USER-SERVIC
Résumé du contenu de la page N° 3
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners
Résumé du contenu de la page N° 4
IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits
Résumé du contenu de la page N° 5
IMPORTANT SAFEGUARDS / Power Source 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 27. NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
Résumé du contenu de la page N° 6
Features DVD/CD Player/Video Cassette Recorder • DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs. • High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (4
Résumé du contenu de la page N° 7
Contents Before using your unit Disc playback operation IMPORTANT SAFEGUARDS .......................... 3 Disc ................................................................ 33 Power Source...................................................5 Setting setup language .................................. 34 Features ...........................................................6 Playback procedure........................................ 35 Contents ......................................................
Résumé du contenu de la page N° 8
Parts and functions Front VCR/DVD mode selector button PLAY button Cassette Loading Slot OPEN/CLOSE button STOP button Disc tray EJECT button POWER Display window DVD indicator CHANNEL / POWER button REW (Rewind) button buttons REC/OTR button Remote sensor AUDIO (L/R)/ FF (Fast Forward) button VCR indicator VIDEO IN jacks Rear DVD COAXIAL DIGITAL AC power cord AUDIO OUT jack RF IN jack RF OUT jack DVD S-VIDEO DVD AUDIO (L/R) OUT jack OUT jacks S-VIDEO/COMPONENT DVD OPTICAL DIGITAL DVD/VCR common
Résumé du contenu de la page N° 9
Display Display window 1 2 3 4 12 5 6 11 10 9 8 7 No. Display Description 1 VCR VCR mode 2 Playback (lights) / Auto resume (flashes) 3 Still picture 4 DVD DVD disc is inserted. 5 CD CD is inserted. 6 PM Display for afternoon (lights out in the morning) Clock display (colon[ : ] flashes) 10 : 00 01 : 00 Counter display by hour/minute at VCR/DVD / by minute/second at CD Track number display for CD 2 7 TV channel display for VCR CH02 CATV channel display C036 External input display L Error display
Résumé du contenu de la page N° 10
Remote control Page POWER Power on/off 18 EJECT Eject a cassette tape 22 OPEN/CLOSE Open or Close the tray 35 VCR/DVD Switch to operate VCR or DVD 18,34 0-9 Direct channel selection of TV 21,26,28 Input setting 37,39 Enter a password 44,45 OPEN/ POWER EJECT CLOSE VCR/DVD DISPLAY/CALL Display VCR or DVD operation status 27,50 INPUT SELECT Switch the connected TV to external mode 32 DISPLAY/CALL 12 3 PROGRESSIVE Set the progressive scanning mode to active 52 CH / Select channel of the connected TV
Résumé du contenu de la page N° 11
Remote control Inserting Batteries Open the battery Install two “AAA” batteries (not Replace the compartment 1 23 compartment cover in the supplied), paying attention to the cover. direction of the arrow. polarity diagram in the battery compartment. Battery precautions The precautions below should be followed when using batteries in this device: 1.Use only the size and type of batteries specified. 2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery
Résumé du contenu de la page N° 12
Basic connections If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber, skip ahead to page 14 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are using and foll
Résumé du contenu de la page N° 13
Basic connections DVD/VCR TO TV CONNECTION After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception. TV NOTE: If a VH
Résumé du contenu de la page N° 14
CATV (CABLE TV) connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception. DVD/VCR 1 TV IN (ANT) VHF/UHF IN (ANT) Incoming
Résumé du contenu de la page N° 15
CATV (CABLE TV) connections IMPORTANT: Make sure the TV/CATV menu option is set to the “CATV” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below a
Résumé du contenu de la page N° 16
Playback connections The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Connect to a TV with Audio/Video Output You can enjoy playback by connecting the unit to a TV. Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable. TV
Résumé du contenu de la page N° 17
Playback connections Connect to a Stereo Amplifier with Audio Output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier. DVD/VCR Stereo Amplifier To Audio (R) Input Audio (L) Output AUDIO cable (not supplied) To Audio (L) Input Audio (R) Output Connect to an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surroun
Résumé du contenu de la page N° 18
Setting the video channel / Setting the language Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape Press and hold 3 or 4 on the remote 1 or DVD disc, or to watch a program control for 3 seconds in the standby selected by the VCR's channel mode to select CH 3 or 4. The selected selector, the TV must be set to channel number will flash on the display for about 4 seconds. channel 3 or 4 (video channel). Turn ON the TV and set to
Résumé du contenu de la page N° 19
Manual clock setting You must set the date and time for Preparation: timer recordings. • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) EXAMPLE: Setting the clock to “8:30 AM” March, 27 (SAT), 2004. OPEN/ POWER EJECT CLOSE VCR/DVD Press VCR MENU. The VCR menu screen will appear. DISPLAY/CALL 1 12 3 Press SET + or – to select the INPUT SELECT/ 2 PROGRESSIVE MENU 45 6 “SYSTEM SETUP” menu, then TIMER REC SET AUTO REPEAT ON OFF
Résumé du contenu de la page N° 20
Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV
