Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
TABLE OF CONTENTS Before use Programme 14 Accessories 1 Zoom 15 Table of contents 2 NTSC/PAL 15 Safety precautions 3 Volume and Mute 15 Important safety notices 4 Mode 15 Important information 6 Menu 15 Suitable discs 7 Title 15 Disc protection 8 Angle 15 Audio 15 Control and connection Special features Normal connection 9 Front panel 11 JPEG 16 Remote control 12 Mp3 discs 16 Normal playback Reference Preparation 13 System setup 17 Normal playback 13 Troubleshooting 21 Pause 13 DVD characteristi
Résumé du contenu de la page N° 4
SAFETY PRECAUTIONS A triangle with a lightning symbol draws the user's attention to “dangerous voltage” without insulation in the housing which may be high enough to entail a risk of electric shock. A triangle with an exclamation mark draws the user's attention to important instructions for use and maintenance in the accompanying manual which should be studied. Symbol for Class II (double insulation). TO MINIMISE THE RISK OF FIRE AND ELECTRIC SHOCK,DO NOT EXPOSE WARNING: DEVICE TO RAIN OR MOISTU
Résumé du contenu de la page N° 5
IMPORTANT SAFETY NOTICES WARNING: IT IS IMPORTANT THAT YOU STUDY AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE DEVICE. KEEP THIS MANUAL FOR FUTURE USE. This device was developed and made with a view to providing maximum safety for the user. Incorrect use of the device may cause electric shock or fire. The protection built into this device will protect the user if the procedure below is observed in connection with installation, use and repair. This device is fully e
Résumé du contenu de la page N° 6
IMPORTANT SAFETY NOTICES Lightning Discs Unplug the device for additional Do not use scratched, deformed or protection during thunder or when repaired discs. Such discs will break the device is not used for prolonged easily and may cause serious injury periods. This will prevent damage to and damage to the device. the device from lightning and surges. Damage Penetration of objects and liquid Unplug the device and contact skilled technicians in the Never push any objects through the following cas
Résumé du contenu de la page N° 7
IMPORTANT INFORMATION Handling instructions Condensation Condensation may occur in the following cases: The DVD player's top and back panel may become warm after prolonged use. This is not due When the DVD player is moved directly from a to a defect. cold to a warm place. When the DVD player is not used, remove the When the DVD player is used in a room where disc and turn off the device. the radiator has just been switched on or where the cold air from the air condition plant is directed If the
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
DISC PROTECTION AND ACCESSORIES Storing the discs Disc handling Do not store the discs where they may be Do not touch the playback side of the disc exposed to direct sunlight or where they are close Do not put paper or tape on the disc to sources of heat. Do not store the discs where they may be exposed to moist or dust, for example in a bathroom or close to a humidifier. Store the discs standing in a cassette. If the cassettes are stacked or an object is placed on the cassettes, the discs may b
Résumé du contenu de la page N° 10
Résumé du contenu de la page N° 11
Résumé du contenu de la page N° 12
Résumé du contenu de la page N° 13
Résumé du contenu de la page N° 14
NORMAL PLAYBACK Preparation Stop playback When you wish to watch a DVD film, switch on the 1. Press the STOP button to stop the playback. The TV-set and choose the video input connected to the start logo will reappear on the TV screen. Some DVD player. discs offer the possibility of resuming playback When you wish to listen to the disc from the audio from the same spot, for example DVDs and music system, switch on the audio system and choose the CDs. input connected to the DVD player. 2. Press P
Résumé du contenu de la page N° 15
ADVANCED PLAYBACK IMPORTANT All descriptions refer to DVDs. Function and display may vary if other types of discs are used. REPEAT VIDEO MODE Press REPEAT once to choose on-screen which The video output can be set to “YUV”, "CVBS”, chapter to repeat. Press once more to choose or “RGB”. the title to be repeated, and press a third time to choose to repeat all, and four times to cancel the OSD (On Screen Display) repetition. Press DISP to switch between “title played”, “title left”, “chapter played
Résumé du contenu de la page N° 16
ADVANCED PLAYBACK MENU ZOOM Press this button to see the main menu and make Press this button to enlarge the picture. The size of the desired choice. (This button can be used for the picture changes every time the button is DVDs with multi-layer menu. Make the desired pressed. choice). NTSC/PAL TITLE Choose between PAL, NTSC, and multi through the setup menu. In the multi function, the device will find On some DVDs, the title menu will be shown when the right system. this button is pressed. Numb
Résumé du contenu de la page N° 17
SPECIAL FEATURES Playing JPEG files JPEG files contain picture information which can be encoded by micro computer software and transmitted to the TV screen via a video output interface. This function is useful in many contexts. For example teachers can change pictures to be shown in the classroom to JPG files by means of a digital camera or a scanner which are often used within the IT world and transfer the pictures to CD-R discs. This will make things easier for the pupils when the teachers pla
Résumé du contenu de la page N° 18
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
SYSTEM SETUP CVBS: Composite video output through the DYNAMIC RANGE COMPRESSION Scart output. To avoid disturbing the neighbours at night, you RGB: RGB output through the Scart output. can use this function to reduce the sound Component: Component video output through effects volume without changing the original the component video outputs on the back panel. tone. Note: This output may allow both Interlace Scan and Progressive Scan. You switch between IS and PS by means of the MODE key on the re
