Résumé du contenu de la page N° 1
VBP620
PORTABLE 6.2" LCD MONITOR AND DVD PLAYER
IN A BAG
Résumé du contenu de la page N° 2
Notice: This Product incorporates copyright protection technology that is pro- tected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights own- ers. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited view- ing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. An LCD panel a
Résumé du contenu de la page N° 3
A. Introduction Thank you for selecting the VBP620 portable DVD player in a bag. The main features include a 6.2" Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices home or vehicle. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation. P
Résumé du contenu de la page N° 4
4. Disassembly Do not attempt to disassemble the cabinet. There is a risk of elec- tric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system is in need of repair. 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped
Résumé du contenu de la page N° 5
OPTIONAL: Wireless IR headphones (Part Number IRHSCS) D. Powering and installation 1. Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC 9V jack on the right side of the main unit, then plug the other end into the 120V AC power receptacle. 2. Powering the system in a car Plug one end of the DC Power adapter into the DC 9V jack on the unit, then plug the other end into the cigarette lighter socket. Figure 1 3. Powering the system with recharge
Résumé du contenu de la page N° 6
1.Installing the System onto the seat back in a car (Refer to Figure 2) Seat Standoff Figure 2 1). Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounting bag. Connect the S! hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. 2). Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag. Attach the S! h
Résumé du contenu de la page N° 7
2. Installing the system between the driver/passenger seat (Refer to Figure 3) Figure 3 1). Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the S! hook to the same ring after looping the strap around the headrest of the driver"s seat. Repeat this process for the right side (Passenger Seat). 2). Take another strap and connect the latch to lower metal ring on the left side of the bag. Attach the S! hook to the same ring after looping the strap
Résumé du contenu de la page N° 8
F. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 4) Figure 4 1) Screen Mode Button 12) Brightness control 2) Pause Button 13) Volume control 3) Play Button 14) Headphone Jack 1 4) Open Button 15) Headphone Jack 2 5) Previous Button 16) IR On/Off Switch 6) Stop Button 17) DC 9V Input Jack 7) Next Button 18) DVD Video Output Jack 8) IR Transmitter 19) DVD L+R Audio Output 9) Remote Control Sensor Jack 10) Power LED 20) Video Input Jack 11) Power On/Off Switch 21) Audio L+R Inp
Résumé du contenu de la page N° 9
2. Remote Control View (Refer to Figure 5) 1) DISPLAY Button 2) ANGLE Button 3) SUBTITLE Button 4) AUDIO Button 5) ZOOM Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Button 7) RETURN Button 8) A-B Button 9) FORWARD Button 10) REVERSE Button 11) SLOW Button 12) STOP Button 13) NUMERIC KEYPAD 14) SETUP Button 15) MENU Button 16) REPEAT Button 17) PREVIOUS Button 18) NEXT Button 19) PLAY Button Figure 5 20) PAUSE Button 9
Résumé du contenu de la page N° 10
G. Loading and Playing a Disc a. After connecting power to the unit, slide the POWER ON/OFF on the right side to ON, the DVD player"s POWER indicator lights. b. Open the disc tray by pressing OPEN at the lower right of the disc tray, and place a disc into the tray with the disc"s label facing up. c. Press at the right side of the door until it clicks shut. The unit will load the disc and start playing. d. Rotate BRIGHT and VOLUME to adjust the LCD"s brightness and the DVD player"s volume. e.
Résumé du contenu de la page N° 11
H. SETUP Press #SETUP" to display the Main screen of the SETUP Menu on the screen. Press # SETUP" again to exit the SETUP Menu and the unit will resume its last playback mode. 1) Press # SETUP", the General Setup Page! will display on screen. General SETUP Menu Screen a).Select #TV Type" using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose TV Type using UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. TV Type Screen Display b
Résumé du contenu de la page N° 12
TV Display Screen Display * Normal/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * Normal/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. c).Select # Angle Mark" using the UP/DOWN buttton, and then press the RIGHT button to enter the submenu
Résumé du contenu de la page N° 13
d).Select #Screen Saver" using the UP/DOWN button, and then press the RIGHT button to enter the submenu. Choose Screen Saver on or off using the UP/DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. Screen Saver Display *On: Enables screen saver *Off: Disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after ap- proximately five minutes if the same image remains on the screen. e).Select # Last Memory" by using the UP/DOWN b
Résumé du contenu de la page N° 14
2) Select Video Quality Setup! by using the LEFT/RIGHT button, press ENTER to enter the video quality setup page. Main Setup Menu Video Quality a).Select #Brightness" by using the UP/DOWN button ,then press ENTER you can change the brightness by pressing the LEFT or RIGHT button. To exit Brightness setting, press ENTER again to return the main Menu. Brightness Screen Display b).Select #Contrast" by using the UP/DOWN button,then press EN- TER you can adjust the Contrast by pressing the LEFT
Résumé du contenu de la page N° 15
c).Select # Hue" by using the UP/DOWN button, then press ENTER you can adjust the Hue by pressing the LEFT or RIGHT button. Hue (Tint) Screen Display To exit Hue setting, press ENTER again to return the main Menu. d).Select # Saturation" by using the UP/DOWN button, then press EN- TER you can adjust the Saturation by pressing the LEFT or RIGHT button. Saturation (Color)Screen Display To exit Saturation setting, press ENTER again to return to the main Menu. 3).Select Password! using the LEFT
Résumé du contenu de la page N° 16
Press ENTER to enter the #Password Change Page". Input the Old Password or the Default Password, the New Password, and the Con- firmed New Password. Press ENTER to confirm the change. Password Change Menu Password Verify Input Screen Display NOTE: The Default Password is 3308. This password is always ef- fective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, y
Résumé du contenu de la page N° 17
4).With no disc inside the player, select Preference! using the LEFT or RIGHT button, then press ENTER to enter the preference page. a. Select # Audio" using the UP/DOWN button, then press RIGHT to enter the submenu. Select the audio language you desire using the UP or DOWN button, then press ENTER to confirm the setting. Press LEFT to return. Preference Audio Language b. Select # Subtitle" the using UP/DOWN button, then press RIGHT to enter the submenu. Select the desired subtitle languag
Résumé du contenu de la page N° 18
c. Select # Disc Menu" using the UP/DOWN button, then press RIGHT to enter the submenu. Select the Disc Menu Language you desire using the UP or DOWN buttons , then press ENTER to confirm the setting. Press LEFT to return. Preference Disc Menu Language Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original recorded language contain
Résumé du contenu de la page N° 19
e. Select #Default" using the UP/DOWN button, then press RIGHT to enter the submenu. Press ENTER to make the setting return to the factory-set mode. Loading Factory Setting NOTE: The parental setting is not affected by the default reset func- tion. 19
Résumé du contenu de la page N° 20
I. Playing DVD 1. Basic Operation Turn the unit on/off POWER Remove/load the disc OPEN Start Play/Execute item or setting PLAY Play at 1/2, 1/4, 1/8 or 1/16 times speed SLOW Still Picture PAUSE (1 time) Stop at the present playing point / STOP (2 times) Stop playing Go to the next chapter, track or scene during NEXT playback Go back to the previous chapter, track or PREVIOUS scene during playback Scan forward at 2, 4, 8,16 or 32 times speed FORWARD Scan backward at 2, 4, 8, 16 or 32 times speed
