Résumé du contenu de la page N° 1
Installation and
User's Manual
Models C1448, C1848, C2148W
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
C1448, C1848, C2148W Air and Water Cooled User Manual Introduction The design of this modular cuber is the result of This installation and user manual is divided into years of experience and testing. Standard features three main sections: Installation, which provides include front accessible indicator lights and on-off the trade person with the information needed to set switches that provide the user with fast access to up and install this product; Use and Operation, critical information and eas
Résumé du contenu de la page N° 4
C1448, C1848, C2148W Air and Water Cooled User Manual Installation: Product Specifications Location Limitations: The product is designed to be Environmental Limitations installed indoors, in a controlled environment. Air cooled models discharge very warm air into the Minimum Maximum room out the back. Space must be allowed at the o o Air temperature 50 F. 100 F. left side and back for air intake and discharge. Water cooled models discharge warm water into Water o o 40 F. 100 F. the building’s dr
Résumé du contenu de la page N° 5
C1448, C1848, C2148W Air and Water Cooled User Manual Product Information The product is a modular cuber. That type of Options: machine is designed to be placed on an ice storage bin or an ice dispenser. Many installations only There are several field-installed options that can be require the matching bin, but some also require an installed at initial start up or later. They include: adapter to be placed between the bin and the cuber or between the dispenser and the cuber. � Vari-Smart adjustab
Résumé du contenu de la page N° 6
C1448, C1848, C2148W Air and Water Cooled User Manual Product Description & Electrical Requirements Dimensions Minimum Circuit Maximum Fuse Model Electrical Condenser w” x d” x h” Ampacity Size* 48 x 24 x 29 C1448SA-32 208-230/60/1 Air 17.7 30 same C1448SW-32 208-230/60/1 Water 16.0 30 same C1448SA-3 208-230/60/3 Air 13.6 15 same C1448SW-3 208-230/60/3 Water 11.9 15 same C1848SA-32 208-230/60/1 Air 25.5 30 same C1848SW-32 208-230/60/1 Water 23.8 30 same C1848SA-3 208-230/60/3 Air 16.5 15 same C1
Résumé du contenu de la page N° 7
C1448, C1848, C2148W Air and Water Cooled User Manual Cabinet Layout, Air Cooled November 2006 Page 5
Résumé du contenu de la page N° 8
C1448, C1848, C2148W Air and Water Cooled User Manual Cabinet Layout, Water Cooled November 2006 Page 6
Résumé du contenu de la page N° 9
C1448, C1848, C2148W Air and Water Cooled User Manual Water The quality of the water supplied to the ice machine Cube ice machines use more water than what ends will have an impact on the time between cleanings up in the bin as ice. While most water is used and ultimately on the life of the product. There are during ice making, a portion is designed to be two ways water can contain impurities: in drained out every cycle to reduce the amount of suspension or in solution. Suspended solids can be h
Résumé du contenu de la page N° 10
C1448, C1848, C2148W Air and Water Cooled User Manual Panel Removal 1 Locate and loosen the two screws at the front Switch Bezel edge of the top panel. All models ship with the On and Off switches front 2 Pull the front panel out at the top until it clears accessible. if desired, the On and Off switches can the top panel. be covered up to prevent unauthorized use by changing the bezel in the front panel's trim strip. A 3 Lift the front panel up and off the machine. cover-up bezel ships loose wit
Résumé du contenu de la page N° 11
C1448, C1848, C2148W Air and Water Cooled User Manual Uncrate and Set Up Begin with unpacking the ice storage bin. Remove Bin Recycling the carton, and using part of the carton as a cushion, tip the bin on its back to remove the skid Many times an ice machine head will be replaced, and attach the legs or casters. while the existing ice storage bin will be reused. This is an acceptable practice, if some precautions are taken: Note: Turn the leg levelers in all the way and adjust after the ice mac
Résumé du contenu de la page N° 12
C1448, C1848, C2148W Air and Water Cooled User Manual Plumbing Requirements All models require connection to cold, potable Water Filters water. A hand actuated valve within site of the machine is required. Air cooled models have a If connecting to water filtration, filter only the water single 3/8” FPT inlet water connection, a 3/8” FPT to the reservoir, not to the condenser. Install new to 3/8” male flare adapter is supplied with the cartridges if the filters were used with a prior machine and
Résumé du contenu de la page N° 13
C1448, C1848, C2148W Air and Water Cooled User Manual Drains All models require drain tubing to be attached to 3 Route the drain tubing to building drain. Follow them. Air cooled models have a single ¾” FPT local codes for air gap. drain fitting in the back of the cabinet. Water cooled models have the same fitting plus an additional ½” Use rigid drain tubes and then route them FPT drain fitting in the back of the cabinet. separately – do not Tee into the bin’s drain or, if water cooled, Tee the
Résumé du contenu de la page N° 14
C1448, C1848, C2148W Air and Water Cooled User Manual Electrical The machine is not supplied with a power cord, one must either be field installed or the machine hard-wired. The dataplate on the back of the cabinet details the power requirements, including voltage, phase, minimum circuit ampacity and maximum fuse size. HACR type circuit breakers may be used in place of fuses. Extension cords are not permitted. Use of Ground Wire a licensed electrician is recommended. Connection Electrical connec
Résumé du contenu de la page N° 15
C1448, C1848, C2148W Air and Water Cooled User Manual Final Check List After connections, 1 Wash out the bin. If desired, the interior of the bin could be sanitized. 2 Locate the ice scoop (if supplied) and have it available for use when needed. Final Check List: 1 Is the unit located indoors in a controlled environment? 2 Is the unit located where it can receive adequate cooling air? 3 Has the correct electrical power been supplied to the machine? 4 Have all the water supply connections been ma
Résumé du contenu de la page N° 16
C1448, C1848, C2148W Air and Water Cooled User Manual Initial Start Up 1 Remove front panel. Check machine for any The hot gas valves open, the air cooled fan motors packing or wires rubbing moving parts. Note shut off and the harvest assist mechanisms are location of control board in upper left corner of activated. The flush valve opens to drain some the machine’s front. water, when it does the inlet water valve opens to refill the reservoir. After a few seconds the flush 2 Remove tape securing
Résumé du contenu de la page N° 17
C1448, C1848, C2148W Air and Water Cooled User Manual Adjustments Bridge Thickness - For Service Tech Only 1/8 - 3/16" bridge 1 Push and hold Off till the machine stops. 2 Remove evaporator cover. 3 Remove curtain. 4 Use a box wrench and rotate the bridge thickness adjustment screw in 1/8 turn increments CW to increase bridge thickness. Rotate CCW to decrease bridge thickness. Too Small Too Big Just Right for Just Right for Caution: Do not make the bridge too thin or the Small Cube Medium Cube m
Résumé du contenu de la page N° 18
C1448, C1848, C2148W Air and Water Cooled User Manual Water flush setting The water flush is factory set to the automatic position, suitable for most water conditions. The setting can be changed to one of 5 manual settings or left on automatic. Flush 1- 2- 3- 5- 4 - Heavy A - Automatic setting Minimum Moderate Standard Maximum Factory Any with RO water Water Setting for High TDS conductivity not or Type typical water less than 10 equivalent water microSiemens/cm Status De-Scale Off Power Water O
Résumé du contenu de la page N° 19
C1448, C1848, C2148W Air and Water Cooled User Manual Use and Operation Once started, the ice machine will automatically make ice until the bin or dispenser is full of ice. When ice level drops, the ice machine will resume making ice. Caution: Do not place anything on top of the ice machine, including the ice scoop. Debris and moisture from objects on top of the machine can work their way into the cabinet and cause serious damage. Damage caused by foreign material is not covered by warranty. The
Résumé du contenu de la page N° 20
r e C1448, C1848, C2148W Air and Water Cooled User Manual Switches The panel in the front of the machine can be flipped Adjustable ice level control up to access two switches – on and off. When this option is present there is an adjustment post and an additional indicator light to the right of Status De-Scale Off the four indicator lights mentioned above. The ultrasonic ice level control allows the use to control the point that the ice machine will stop making ice before the bin or dispenser is
