Instruction d'utilisation Actron HQ441

Résumé du contenu de la page N° 1

  
           
Inductive Timing Light


  


         


Actron Manufacturing Company, 15825
Industrial Parkway, Cleveland, Ohio 44135,
Inductive Advance
   

    

garantiza al usuario que este equipo estará
    
       libre de defectos en los materiales y
Timing Light
fabricación por un período de un (1) año a


Résumé du contenu de la page N° 2

missing, consult the vehicle service manual or TWELVE (12) VOLT POSITIVE (+) appropriate service literature for the engine SAFETY GUIDELINES GROUND ELECTRICAL SYSTEMS under test. It is important to note that prepara- TO PREVENT ACCIDENTS THAT COULD RESULT IN SERIOUS INJURY Steps 4 and 5 of LEAD CONNECTIONS below tion is specific to each engine. AND/OR DAMAGE TO YOUR VEHICLE OR TEST EQUIPMENT, CAREFULLY are revised to read as follows: FOLLOW THESE SAFETY RULES AND TEST PROCEDURES 4. Connect the

Résumé du contenu de la page N° 3

ENGINE TIMING CHECK NOTE Fig. 1 - Hookup Diagram Positioning the Inductive Fig. 3 - (Breaker point equipped engines only) Pickup for Reliable Readings The following timing adjustment procedure can be used on the majority of spark ig- Check and, if necessary adjust dwell to specifi- nited engines in use today. Both General cation before proceeding with timing check. Motors and Ford Motor Company have 1. Prepare the engine for timing as indicated introduced and used special versions of above in EN

Résumé du contenu de la page N° 4

Fig. 7 Fig. 8 Fig. 9 TIMING ADVANCE Spark Advance Timing Fig. 6 - 30 35 30 35 30 35 25 25 25 40 40 40 The following instructions apply only 20 20 20 45 45 45 15 15 15 TIMING to advance timing lights. 50 50 50 MARK 10 10 10 55 55 55 The following advance system checks are gen- 5 5 5 60 60 60 READING READING 0 0 0 ROTATION degrees READING degrees degrees eral and may be used on most pre-emission ADVANCE CENTRIFUGAL advance advance advance DAMPER TIMING LIGHT ADVANCE AND controlled vehicles. Note h

Résumé du contenu de la page N° 5

11. Set the timing light’s advance control to “0”. Luz de regulación FULL ONE (1) YEAR WARRANTY Restart the engine. Actron Manufacturing Company, 15825 12. Aim the timing light at the timing marks, pull inductiva Industrial Parkway, Cleveland, Ohio 44135, the trigger and note engine timing. warrants to the user that this unit will be free from defects in materials and workmanship 13. Adjust engine RPM if necessary, and apply Luz de regulación for a period of one (1) year from the date of


Résumé du contenu de la page N° 6

   (   #     


   
  
           REGLAS DE SEGURIDAD   
         0 PARA IMPEDIR ACCIDENTES QUE PUEDAN CAUSAR GRAVES LESIONES Y/O    )  +                   DAÑAR EL VEHICULO O EL EQUIPO DE PRUEBA, SEGUIR ATENTAMENTE   

Résumé du contenu de la page N° 7

  
 Fig. 1 -
       Fig. 3 - &;       0    %         '                %    6 1 #      # %     * ;  < ; /            

Résumé du contenu de la page N° 8

Fig. 7 Fig. 8 Fig. 9           Fig. 6 -  30 35 30 35 30 35 25 25 25 40 40 40         20 20 20 45 45 45 15 15 15 
  50 50 50     
  10 10 10 55 55 55 5 5 5           60 60 60 0 0 0
 degrees degrees degrees advance advance advance