Résumé du contenu de la page N° 1
Instructions for use
DISHWASHER
Contents
GB
Product Fiche, 2
English, 1
Precautions and safety advice, 3-4
General safety
Disposal of old electrical appliances
Saving energy and respecting the environment
Recycling & Disposal Information
Installation, 5-6-7
Positioning and levelling
Connecting the electricity and water supplies
Technical data
Advice regarding the first wash cycle
Description of the appliance, 8
Overall view
Control panel
Loading the racks, 9-10
LTF 11S112
Lower rack
Upper rack
Résumé du contenu de la page N° 2
Product Fiche Product Fiche GB Brand HOTPOINT Model LTF 11S112 Rated capacity in standard place settings (1) 15 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 302.0 Energy consumption of the standard cleaning cycle in kWh 1.07 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.0 Drying efficacy class on a scale from G (low efficac
Résumé du contenu de la page N° 3
Precautions and safety advice • The packaging material should not be used as a toy: The appliance was designed and manufactured in GB it can become a choking or suffocation hazard. compliance with current international safety standards. The following information has been provided for safety If your family includes children: reasons and should therefore be read carefully. • DO NOT allow children to play with the appliance or Keep this instruction manual in a safe place
Résumé du contenu de la page N° 4
• Enzymes provide a particularly effective action GB at temperatures around 50°C, and as a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle. • To avoid wasting detergent, use the product in appropriate quantities based on the manufacturer’s recommendations, the hardness of the water and the soil level and quantity of the crocke
Résumé du contenu de la page N° 5
Installation The cable should not be bent or compressed. If the appliance must be moved at any time, keep it GB in an upright position; if absolutely necessary, it may be If the power supply cable is damaged, it must be replaced tilted onto its back. by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service) Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged d
Résumé du contenu de la page N° 6
The Company shall not be held responsible for any If the inlet hose is not long enough, contact a specialist GB incidents that occur if these regulations are not observed. store or an authorised technician (see After Sales Service). The water pressure must be within the values indicated Anti-condensation strip* in the Technical data table (see Installation). After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order
Résumé du contenu de la page N° 7
Advice regarding the first wash cycle Ensure the drain hose is securely GB After the installation, remove the stoppers from the racks and the attached, to prevent it coming away retaining elastic elements from the upper rack, if any. while the machine is in use and Immediately before the first washing, completely fill the salt causing a flood. dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The wa
Résumé du contenu de la page N° 8
Description of the appliance Overall view GB 1. Upper rack 2. Upper sprayer arm 3. Tip-up dispensers 4. Rack height adjuster 5. Third rack* 6. Lower rack 7. Lower sprayer arm 8. Washing filter 9. Salt dispenser 10. Detergent and rinse-aid dispensers and device Active Oxigen* 11. Data plate 12. Control panel*** Control panel Delayed start button Select wash cycle button Zone Wash button Salt indicator light ON-OFF/Reset button Extra dry
Résumé du contenu de la page N° 9
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors*. GB Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water. easily. Arrange the crockery so that it is held in place firmly and does not tip over and arrange the containers
Résumé du contenu de la page N° 10
The upper rack can be adjusted for height based on Third rack GB requirements: high position to place bulky crockery in the lower The third rack was designed to house the cutlery. Arrange the rack and low position to make the most of the tip-up dispensers/ cutlery as shown in the figure. sectors by creating more space upwards. Adjusting the height of the upper rack In order to make it easier to arrange the crockery, the upper rack may be moved to a higher or lower position. The
Résumé du contenu de la page N° 11
Start-up and use Starting the dishwasher Measuring out the detergent GB A good wash result also depends on the correct 1. Turn the water tap on. amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and 2. Open the door and press ON-OFF button. increases environmental pollution. 3. Measure out the detergent. (see adjacent information). 4. Load the racks (see Loading the racks). Based on how soiled the items are, the amount can be 5. Select the
Résumé du contenu de la page N° 12
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. GB Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water Energy which Wash cycle Options duration of wash consumption consumption include cycles (l/cycle) (KWh/cycle) drying Delayed start – Tabs – 1. Eco Yes 03:15’ 11 1,07 Extra Dry
Résumé du contenu de la page N° 13
Special wash cycles and Options Notes: Extra drying GB Optimum performance levels when using the “Fast wash” To improve the dryness level of the crockery, press and “Express 30’” cycles can be achieved by respecting the EXTRA DRYING button, the indicator light/symbol will the specified number of place settings. illuminate. If it is pressed again the option will be deselected. To reduce consumption even further, only run the dishwasher A higher temperature during
Résumé du contenu de la page N° 14
X A Rinse aid and refined salt Only use products which have been specifically designed Switch on and off the dishwasher using the ON/OFF button. Press GB for dishwashers. and hold the P button for a few seconds until you hear a beep. Do not use table salt or industrial salt, or washing up liquid. Switch on the dishwasher with the ON/OFF button, the set level Follow the instructions given on the packaging. appears on the display (water softener set to medium level). I
Résumé du contenu de la page N° 15
Care and maintenance Shutting off the water and electricity Cleaning the filters GB The filter assembly consists of three filters which remove food supplies residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They should be cleaned if you wish to achieve the best results • Always unplug the appliance when cleaning it and when in every wash. performing maintenance work. Clean the filters regularly. C
Résumé du contenu de la page N° 16
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance GB Problem: Possible causes / Solutions: • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately The dishwasher does not start or one minute and reset the program. cannot be controlled. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close. • The lock
Résumé du contenu de la page N° 17
After Sales Service After Sales Service Appliance Registration GB No one is better placed to care for your Hotpoint W e w an t t o g iv e y ou a dd i ti o na l b en ef i ts o f H ot p oi n t appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer. you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 Essential Contact Information www.hotpointservice.co.uk Hotpo
Résumé du contenu de la page N° 18
Guarantee GB Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions: -
Résumé du contenu de la page N° 19
GB 19
Résumé du contenu de la page N° 20
195110470.04 01/2014 pb - Xerox Fabriano GB 20
