Instruction d'utilisation Harbor Freight Tools 97004

Résumé du contenu de la page N° 1

wireless doorbell
Model 97004
set up And operA ting instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sAVe tHis MAnuAl.
© ®
Copy

Résumé du contenu de la page N° 2

sAVe tHis MAnuAl Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. iMport Ant sAFetY inForMA tion in this manual, on the labeling, and all other information provided with this product: this i

Résumé du contenu de la page N° 3

generAl sAFetY rules wArning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. sAVe tHese instructions 1. w ork area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Keep children and bystanders away while installing the w ireless doorbell. Distractions can cause you to lose control. 2. personal safety a. Stay alert, watch what you are doing and use common sense when

Résumé du contenu de la page N° 4

sAVe tHese instructions. speciFicA tions Polystyrene transmitter and receiver, Construction steel mounting hardware and thermoplastic anchors (1) VA23A, MS21/MN21, A23S, 12V, Transmitter Battery Alkaline (included) Receiver Battery (2) AA, 1.5V (not included) Working Distance Up to 200 Feet unp AcKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual

Résumé du contenu de la page N° 5

Assembly installing and replacing batteries Figure 1 Receiver Battery Compartment Battery Cover (3) 1. You will have to install 2 “AA” Batteries in the Receiver (2). Remove the Battery Cover (3) located on the back of the Receiver (2)-see Figure 1. 2. Insert Batteries making certain that the polarity lines up with the polarity indicated in the Battery Compartment. Replace Battery Cover (3). Figure 2 Transmitter Battery Cover (4) Transmitter (1) 3. To replace Transmitter Battery, first remov

Résumé du contenu de la page N° 6

2. The Wireless Doorbell can be mounted with two-sided Mounting Tape (5/). Remove backing from the Mounting Tape (5/). Attach the backing to the Transmitter and/or Receiver and press it into place. Make certain that the mounting surface is dry and free of debris. Remove the backing from the second side of the Tape and press the unit onto the desired location. 3. Two Mounting Screws (8) and Anchors (7) are included to secure the Transmitter to walls. Before inserting Mounting Screws (

Résumé du contenu de la page N° 7

AsseMbl Y diAgrAM 2 4 5 1 3  7 9 8 Record product’s serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 97004 For technical questions, please call 1-800-444-3353. Page 7