Instruction d'utilisation Gianni Industries GEM DG-25

Résumé du contenu de la page N° 1

The Digital Keyless Entry system
Operation User's Manual





1. Product Characteristic:
Allows up to 49+50 PIN codes
Dual relays programmable On/Off or pulsed or latched mode
Fully Programmable via keypad and master code
Door Reed Switch Input for Anti-Trailing
3 LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Durable Stainless Steel housing
With vandal resistant screws


2. Specifications:
Operating Voltage: 12~24 Vdc
Current

Résumé du contenu de la page N° 2

3. The indicator signal chart: Sound and LED indicator: Green LED Power on, stand-by Red LED Relay 1 activated LED signal Yellow LED Relay 2 activated 1 Beep Effective PIN codes 2 Beeps Entering 、Exiting from the Program mode Sound signal 3 Beeps Data computing error 、 other operation mistakes 5 Beeps Master Code reset to Factory （12345 ） 4. Operation Instruction: Enter Program Mode: 1. Compose twice the master code (Factory master is 「12345 」) → 2 beeps → you are now

Résumé du contenu de la page N° 3

Changing the Master codes: Enter the Programming mode, Enter 「＊000 」Followed by the new 5 digit master code → （beep ） →enrolled →Enter 「# 」 to exit from the programming mode, or program other operating. Master Code reset to Factory 「12345 」 Insert the jumper P1 1-2 position 5 audible beeps Reset successful Return Insert the jumper to 2-3 position. 5. Wiring diagram: Power Supply Fail-Secure Locking Device 1 Fail-Safe Locking Device 2 Contact door reed switch Power S