Instruction d'utilisation Stanton PRO-30

Résumé du contenu de la page N° 1

PRO-30
PROFESSIONAL STEREO PREAMP MIXER
OWNER’S MANUAL
PRO-30
Register this product online
@
@
www.stantonmagnetics.com
STANTON MAGNETICS, LLC
2821 Evans St. Hollywood, FL 33020 (954) 929-8999
Fax: (954) 929-0333 info@stantonmagnetics.com
© 1999, Stanton Magnetics, LLC

Résumé du contenu de la page N° 2

T RO U B LE S H O OT I N G Thank you for making Next! your first choice in professional DJ mixers. Problem Cause Solution This new, innovative family of mixers has been developed with input from the profes- Excessive hum when using Poor ground connection. Properly connect turntable sional DJ community, bringing to the marketplace a previously unavailable, afford- phono source. ground wire to mixer ground able combination of user-friendly, functional design, rugged construction, and pro- terminal

Résumé du contenu de la page N° 3

D E S C R I P T IO N OF F U N C TI O N S 7. Meter mode selector: Determines the setting of the level meter (6). When pressed, cue levels of channels 1 and 2 are displayed. When released, stereo master output signal is displayed. 8. Power switch: Selects power "ON" or "OFF" 9. Fader Start controls: Activate the Fader Start function when connected to a CD player with fader start capabilities (such as the Next! NCD-7000). When fader start is engaged, the CD player can be started and paused by

Résumé du contenu de la page N° 4

C RO S S FADER CLE A N I N G T E C H N I CA L S P E C I FI C AT I O NS The PRO-30 crossfader may need lubrication from time to time. This will extend Line inputs: 2 (RCA), 150 mV / 47K ohm the fader life and eliminate any potential damage due to extended heavy usage. Phono inputs: 2 (RCA), 3 mV / 47K ohm DJ mic input: 1 (1/4 inch), 1.6 mV / 600 ohm Cleaning Instructions Master output: 1 (RCA), 1V / 600 ohm Record output: 1 (RCA), 350 mV / 600 ohm 1. Remove the crossfader by unscrewing the 2 oute