Résumé du contenu de la page N° 1
XP-3™ General Information
General instructions: To optimize the performance of this product,
American DJ American DJ American DJ® ®
please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. These instructions contain impor-
tant safety information regarding the use and maintenance of this unit.
Please keep this manual with the unit, for future reference.
Unpacking: Thank you for purchasing the XP-3™ by American DJ®.
Every XP
Résumé du contenu de la page N° 2
XP-3™ Safety Precautions XP-3™ Features Safety Issues: This unit may blow a fuse if the maximum allotted • Micro-Stepping Motors for Smooth Transitions load of 5 amps is reached. If the fuse needs replacement, always • Uses Five DMX Channels replace the fuse with same exact type that was remove, unless other- • DMX-512 Protocol Compatible wise instructed by an authorized American DJ® service technician. Use • Full Focusing of a different type fuse from that which i
Résumé du contenu de la page N° 3
XP-3™ Set Up XP-3™ Set Up Power Supply: Before plugging your unit in, be sure the source Notice: Be sure to follow fi gure three when making your own cables. voltage in your area matches the required voltage for your American Do not use the ground lug on the XLR connector. Do not connect the DJ® XP-3.™ Because line voltage may vary from venue to venue, cable’s shield conductor to the ground lug or allow the shield conductor you should be sure your unit voltages matches the
Résumé du contenu de la page N° 4
XP-3™ Linking XP-3™ Linking DMX Linking: Master/Slave Linking: DMX function allows independent control of each fi xture. Use any uni- For a more dramatic effect, link several XP-3™ together. Your fi xture versal DMX controller to access the different traits associated with the comes with built-in programs. These programs are designed to work XP-3. A reference of different DMX traits is printed on page 21 of this with up to 4 units when daisy-chained together in a master-slave
Résumé du contenu de la page N° 5
XP-3™ Controls and Functions XP-3™ Controls and Functions 1. Lens - This is a fully focusing high quality lens. Focus the lens by manually TOP turning the lens in a clockwise or counter-clockwise direction until the image is in focus. 2. XLR Output Jack - This jack is used to transmit the incoming DMX signal to another DMX 1 7 fi xture, or transmit a Master/Slave signal to the nest XP-3™ in the 8 chain. For best results in DMX or Master/Slave mode, terminate this jack if it is
Résumé du contenu de la page N° 6
XP-3™ Controls and Functions XP-3™ Operation 9. Audio Sensitivity Knob - Operating Modes: ™ This knob adjust the audio sensitivity of the internal microphone (10). The XP-3 may be operated in three different modes: Turning the sensitivity knob in the clockwise direction will increase the • Stand Stand Stand alone alone alone mode mode mode - - - The The unit unit will will react react to to sound, sound, chasing chasing through through sensitivity to sound. Turning the kno
Résumé du contenu de la page N° 7
XP-3™ Operation XP-3™ Operation in the counter-clockwise direction will decrease the fi xture’s sensi- blackout in this mode to conserve bulb life when there is no sound pres- tivity to sound. ent. 4. The optional MINI/C Blackout Controller may be used in this Master/Slave Settings mode to control blackout. Note: Stand-Alone operation require sound to activate! The units will blackout in this mode to conserve bulb life when there is no sound pres- ent. Small Patter
Résumé du contenu de la page N° 8
XP-3™ Operation XP-3™ DMX Traits on pages 5 - 7 as well as the set-up specifications that are included The chart below details the DMX traits in depth. The individual trait with your DMX controller. can only be accessed by using an universal DMX controller. Note: The 3. Use the DMX controller’s faders to control the various DMX fixture gobo patterns can be found on the next page. traits. XP-3 4. This will allow you to create your own programs. DMX
Résumé du contenu de la page N° 9
XP-3™ Gobo Wheel Layout XP-3™ Cleaning Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp output. 1. Use normal glass
Résumé du contenu de la page N° 10
XP-3™ Halogen Lamp Warning XP-3™ Fuse & Lamp Replacement with halogen lamps. Never touch the new lamp with your bare fingers. 2. Remove the thumb screw on the rear of the unit’s head. This screw This fixture is fitted with halogen lamps which hold the lamp socket cover in place. are highly susceptible to damage if improperly 3. Pull back the cover once the screw has been removed to access handled. Never touch the lamps with your the socket assembly. bare fi
Résumé du contenu de la page N° 11
XP-3™ Master/Slave Quick Reference Chart XP-3™ Warranty The charts below details the Master/Slave setting for Master/Slave 1 YEAR (365 DAYS) LIMITED WARRANTY configuration. Use this configuration when you will be using two or A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be more fixtures in a Master/Slave configuration. The Master - Head 1 free of manufacturing defects in material and workmanship for a period of 1 year (365 days) f
Résumé du contenu de la page N° 12
Technical Specifications: Model: XP-3™ Lamps: ZB-JCR H5 15v/150w Voltage*: 120v~60Hz or 220v~50/60Hz Dimensions: 12.5”(H) x 11.25”(W) x 8.5”(D) Colors Multiple Colors Gobos: 17 color/gobo combinations, (w 3 bicolored combinations, plus white spot) Weight: 19 Lbs. Fuse: 5 Amp GMA Duty Cycle: None DMX: 5 Channels Sound Active: Yes Working Position: Any Safe, Secure Position Warranty: 1 Year (365 days) * Voltage is preset at the factory and is not u
