Résumé du contenu de la page N° 1
User manual
Manuel d’utilisation | Benutzerhandbuch | Manual del usuario
Gebruikershandleiding | Manuale per l'utent | Manual do usuário
Användar-handbok
PhotoFrame™ 9FF2
Classic
9FF2CWO
Modern
9FF2CMI
9FF2M4
9FF2CME
Résumé du contenu de la page N° 2
Content Philips © 2006 2006.8 First Version V06.08.10 —1— 4.1 Slideshows............................ - 32 - 1. Getting started......................... - 3 - 4.1.1 Create New Slideshow............ - 32 - 1.1 Packing list ................................ - 3 - 4.1.2 Play All albums or selected slideshow - 1.2 Initial setup................................ - 4 - 33 - 1.2.1 Connecting Power Source ......... - 4 - 4.1.3 Add Album to Slideshow ......... - 34 - 1.2.2 Locate Control B
Résumé du contenu de la page N° 3
Introduction Philips digital PhotoFrame™ can be placed either vertically or horizontally to fit the photos on display. Its internal rechargeable battery provides you with the freedom to pass it around and show photos without the power cord. Or, you can place it somewhere in a room for a continuous display by connecting it to the mains power supply. -2 - Philips Electronics
Résumé du contenu de la page N° 4
1. Getting started 1.1 Packing list USB Cable to PC Digital PhotoFrame™ Power adaptor (male B type plug) Quick start guide User manual and Auto Run software on CD What else you'll need Power outlet Digital Photos on memory card or PC -3 - Philips Electronics
Résumé du contenu de la page N° 5
1.2 Initial setup Remove the parts from the packaging 1.2.1 Connecting Power Source Connect the supplied power cable from PhotoFrame™ to a power outlet. The internal battery will start charging and the battery LED turns blue and flashes. This will take approximately 3 hours. Note: For safety reason and best stability Philips recommend to adjust the stand with the angle defined by the two clicked position. Using other positions may cause the PhotoFrame™ to fall and is under t
Résumé du contenu de la page N° 6
1.2.2 Locate Control Buttons Play/Stop Slideshow Navigation controller/ OK Menu Rest Button Power ON/OFF • Use your PhotoFrame™ by pressing the control buttons in the back. • The control buttons and instructions are shown at the bottom of the menu screen. Navigation Controller -5 - Philips Electronics
Résumé du contenu de la page N° 7
1.2.3 Turning on PhotoFrame™ Press the power ON/OFF button. The power LED will be blue and a slide show will play -6 - Philips Electronics
Résumé du contenu de la page N° 8
1.2.4 Select your preferred language Select your preferred language (Default Language – English) Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu. Navigate down to go to language. Navigate right to enter the language menu. Navigate up and down to select your preferred language (select between English, French, Spanish, Italian, German, Russian, Chinese and Japanese) Press the
Résumé du contenu de la page N° 9
1.2.5 Setting Time, Date and Clock Use this function to set the time and date of the PhotoFrame™. Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu. Navigate down to Clock. Navigate right to access the Time settings. Time: Navigate up and down to select the time. Navigate left and right to move between hours, minutes and AM/PM. Press the OK button to confirm selection. Date:
Résumé du contenu de la page N° 10
1.2.6 Play Photos from Memory Card A B A. CF Card B. SD/ MMC /MS / xD Card Inserting a memory card: • Insert the memory card into the slot in the frame. • For a Compact Flash card, firmly slide card in the larger slot end first and face DOWN. • For a xD, SD, MMC, or Memory Stick card slide card in the smaller slot end first and face UP until it locks in-place. After a few seconds photos on the memory card will display and a slideshow
Résumé du contenu de la page N° 11
1.2.7 Copy photos from PC For Windows PC (2000 & XP): • To copy photos from PC to PhotoFrame™, install Auto Run software PhotoFrame™ manager on PC • For installation and more details about his application, follow instrustions in user manual on CD For Mac System: (OS X or later): • Connect PhotoFrame™ to the Mac via USB cable . (it will be recognized as a mass storage device.) • Select photos to be transferred and copy them directly under the root directory of PhotoFrame™. (Only J
Résumé du contenu de la page N° 12
2. Enjoying Photos 2.1 Browse Mode - To enter Browse mode you need to be in Slideshow mode and click once on the Play/Stop button. - To move through the photos, navigate left and right. - To restart the slideshow Press the Play slideshow stop button. 2.2 Slide Show Mode Slideshow mode is entered once you turn on the PhotoFrame™. Navigate left and right to move quickly through the photos. Note 1: The frequency of the slideshow can be adjusted. To do so please read “slideshow
Résumé du contenu de la page N° 13
3. Managing Photos and Albums 3.1 Thumbnail Access and Navigation A large number of Photos can be viewed quickly using thumbnails. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the photo source to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Navigate left and right to move between photos. Note: If you press left on the first p
Résumé du contenu de la page N° 14
3.2 Quick access to thumbnai Thumbnails can be accessed directly from the slideshow by pressing the OK button. The thumbnail with the mini preview is launched and the picture last seen on the slideshow when you pressed the OK button is displayed. 3.3 Photo selection – single and multiple Using the method below you can select either single, multiple or all 16 photos. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. N
Résumé du contenu de la page N° 15
3.4 Photo Menu This menu allows the control all aspects of managing your photos. Copy, Delete and Move photos as well as select various effects, frames to apply to your photos. 3.4.1 Copying Photos You can copy photos stored on a memory card or PC to PhotoFrame™ internal memory or in a Memory card plugged in the PhotoFrame™. PhotoFrame™ will then internally store a resized copy of the original photo. This resized copy will remain inside PhotoFrame™ until you delete it from PhotoF
Résumé du contenu de la page N° 16
Navigate left and right to move between photos. Note: If you navigate left on slide 1 you will return to the previous menu. Navigate up and down to move to the next 16 images. Press OK to select individual images. Press OK for 3 seconds to select all visible thumbnails. Once all required photos have been selected press the menu button. Navigate right to go to the source you want to copy your photo to. Navigate down to select the media to copy to. Navigate right to select which album
Résumé du contenu de la page N° 17
The number of photos accepted in this directory may be limited due to limited internal memory on PhotoFrame™. Therefore, it is highly recommended to put the photos on a memory card and copy the photos to PhotoFrame™ from that memory card. • Disconnect the USB cable. For Windows 2000 systems, remember to safely remove hardware before disconnection After a few seconds, all photos in the root directory will be automatically added to PhotoFrame™ and the root directory will be emptied.
Résumé du contenu de la page N° 18
3.4.2 Deleting Photos2 If you need to free up space on the PhotoFrame™ or a memory card you can delete photos. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the slideshow menu. Navigate down to select the source to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Press the navigation buttons to move between photos. Press the OK button to select individual images. Press t
Résumé du contenu de la page N° 19
When you delete a photo, PhotoFrame™ will show the status and return to the album after completion. Press Play Slideshow to leave this menu and play the slideshow Or navigate left to move back through the menus Note: You may delete photos one by one or several photos at once. Note: To delete a Photo from a memory card Go to Setup Menu > Memory Card > Album Creation > Delete Function. You will be able to perform the same functions as the internal memory. Note: To be able to delet
Résumé du contenu de la page N° 20
3.4.3 Rotating, Zooming and Cropping3 PhotoFrame™ can change the orientation of photos and change the framing of photos. Note: The crop function only applies to original photos stored on external memory card. Rotating Press the menu button to access the Main Menu. Navigate right or press the OK button to access the slideshow menu. Navigate down to select the media to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album.
