Résumé du contenu de la page N° 1
D:\DPF series\2010models\DPF-A73.E73
series\IM\4174749112DPFA73.E72IM_GB\4174749112\4174749112DPFA73.E72IM_GB\01GB-
DPFA73.E73.UC.CED_IM\010COV.fm
Master: Right
010COV.fm Page 1 Sunday, December 27, 2009 7:00 PM
4-174-749-11 (2)
For your safety
Digital Photo Let’s get the photo
frame ready
Frame
Let’s view an image
DPF-A73/E73
Try using various functions
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it
Résumé du contenu de la page N° 2
The number below is for the FCC related matters only. WARNING Regulatory Information To reduce fire or shock hazard, do not Declaration of Conformity expose the unit to rain or moisture. Trade Name: SONY Do not expose the batteries to Model No.: DPF-A73 excessive heat such as sunshine, fire Responsible Party: Sony Electronics Inc. or the like. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. CAUTION Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Replace the
Résumé du contenu de la page N° 3
conserve natural resources. In case of products that for For the Customer in Europe safety, performance or data integrity reasons require a This product has been tested and found compliant permanent connection with an incorporated battery, this with the limits set out in the EMC Directive for using battery should be replaced by qualified service staff connection cables shorter than 3 meters (9.8 feet). only. To ensure that the battery will be treated properly, hand over the product at end
Résumé du contenu de la page N° 4
Notice for users Read this before using Program © 2010 Sony Corporation Notes on playback Documentation © 2010 Sony Corporation Connect the AC adaptor to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately. All rights reserved. This manual or the software described herein, in whole or in part, may not be Notes on copyrights reproduced, translated or reduced to any machine Duplication, edition, or printing of a CD, TV readable
Résumé du contenu de la page N° 5
Table of Contents Read this before using ..................................................................................... 4 For your safety Checking included items .................................................................................. 7 Identifying the parts ......................................................................................... 8 Digital photo frame .................................................................................................... 8 Remote co
Résumé du contenu de la page N° 6
Troubleshooting If an error message appears ...............................................................23 If trouble occurs ..................................................................................23 Additional information Precautions .........................................................................................25 Installation ...............................................................................................................25 Cleaning ........................
Résumé du contenu de la page N° 7
For your safety oyou saey For your safety Checking included items Make sure that the following items are included. Digital photo frame (1) Stand (1) Attaching to the screw hole (.page 10) , Remote control (1) Removing the protective sheet (. page 10) , AC adaptor (1) Connecting to the AC power source (.page 12) , Exchangeable panels (DPF-E73 The supplied CD-ROM contains the Digital Photo only) Frame Handbook that explains operations and setups Operating Instructions (this manual) (1)
Résumé du contenu de la page N° 8
Identifying the parts x Digital photo frame Front LCD screen Remote sensor Sony logo (DPF-A73 only) (.page 10) Rear VIEW MODE button (.page 16) 1 (on/standby) button Standby indicator MENU button Direction (B/b/v/V) buttons, ENTER ( ) button BACK button Access lamp Memory card slot (.page 15) Holes for hanging unit on the wall Space for storing the stand GB 8
Résumé du contenu de la page N° 9
For your safety USB B connector (.page 22) Stand (.page 10) DC IN 5 V jack (.page 12) x Remote control VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( ) button SINGLE button CLOCK ( ) button INDEX ( ) button MENU button Zoom in ( ) button Direction (B/b/v/V) buttons ENTER ( ) button BACK button Zoom out ( ) button SELECT DEVICE button IMPORT ( ) button ROTATE ( ) button DELETE ( ) button About descriptions in this manual The operations described in this manual are based on remote control
Résumé du contenu de la page N° 10
Let’s get the photo frame ready P Notes Remote control � If the remote control stops working: Replace the battery (CR2025 Pull out the protective sheet before use as shown in the lithium battery) with a new one. � When the lithium battery becomes figure. weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the Protective sheet battery with a Sony CR2025 lithium battery. Use of another battery may present
Résumé du contenu de la page N° 11
Let’s get the photo frame ready To display the photo frame on the wall PNotes � Use screws suitable for the quality of the material of the wall. The 1 Prepare screws (not supplied) suitable for the screw screws may be damaged, depending on the type of material holes on the rear panel. used in the wall. Set the screws in a pillar or stud in the wall. 3 4mm ( / inch) 16 � When you want to re-insert the memory card, remove the photo frame from the wall, then eject and More than 25mm (1 inc
Résumé du contenu de la page N° 12
PNotes Turning the photo frame on � The socket outlet should be as close as possible to the unit, and easily accessible. � Do not place the photo frame on an 1 Insert the plug of the AC adaptor into the DC IN 5 V unsteady or tilted surface. jack on the rear of the photo frame. � Connect the AC adaptor to an easily accessible wall outlet close by. If 2 Connect the AC adaptor to the wall outlet. trouble occurs while using the The photo frame is automatically turned on. adaptor, immediately
Résumé du contenu de la page N° 13
Let’s get the photo frame ready Removing the AC plug from the wall outlet � If handled roughly, the AC plug If the AC plug remains inserted in the wall outlet, remove it as may become detached from the AC adaptor main unit and remain in the follows, without using a tool: wall outlet. If this occurs, grasp the AC plug with dry hands as illustrated and remove it from the wall outlet. Do not use a tool. Be careful not to touch the metal terminals at the rear of the AC plug. � Check to see
Résumé du contenu de la page N° 14
Setting the current time P Tip The B/b buttons become activated 1 Press MENU, and B/b to select the (Settings) tab. only when the Clock and calendar v/V [Date/time Settings] , (ENTER) view mode (page 16) is not selected. 2 Press v/V to select [Time] , (ENTER). v/V to select a value. , B/b (hour, minute, and second) Setting complete. , (ENTER) 3 Press MENU. In the same window, you can use the same procedures as time setting to set the following: Setting items �Date �Date Display Orde
Résumé du contenu de la page N° 15
Let’s view an image Let’s view an image PNote Inserting a memory card When using a memory card of the following types, make sure to insert it in an appropriate adaptor. Insert the memory card firmly into the corresponding slot If you insert it without an adaptor, with its label side facing toward you (when you are facing you may be unable to remove it. As the back side of the photo frame). shown in the right-most illustration below, make sure to insert the following types of memory card
Résumé du contenu de la page N° 16
Changing the display 1 Press the button corresponding to view mode you want to select. VIEW MODE buttons PNote The display changes to selected view mode. If you do not operate the photo frame for a certain period of time, 2 Press B/b/v/V to select a desired style, and then the style indicated by the cursor is press (ENTER). automatically selected. The view mode screen is displayed. Displays Styles z Tip Single view, Multi image view, Clock Style descriptions: view, Calendar view, Time Mac
Résumé du contenu de la page N° 17
Let’s view an image 4Setting information About the information displayed Icons Meaning on the LCD screen Protect indication Associated file indication (Displayed when there is an associated file such as a motion file or a miniature e-mail image file.) 5Image number (folder-file number) This is displayed if the image is DCF compliant. If the image does not comply with DCF, its file name is displayed. The following information is displayed. If you named or renamed the file on your 1Display
Résumé du contenu de la page N° 18
Try using various functions z Tips Various functions x Importing The number of images to be saved in the internal memory: � Importing an image (a memory card b the internal � Resize: approx. 250 images memory) � Original: the number of images may vary, depending on the � Exporting an image (the internal memory b original image file size. a memory card) x Exporting � Deleting an image Any memory card that is not recognized by this photo frame is shown in gray and you cannot select 1 When a
Résumé du contenu de la page N° 19
Try using various functions Specifying the playback device Press SELECT DEVICE. z What is “playback device”? Press v/V to select the playback device, and then press A memory card or the internal (ENTER). memory. P Note During Clock and calendar display, you cannot select the (Select device) tab. Adjusting image size and orientation (Zoom in/Zoom out/Rotate) P Notes � Enlarging an image may reduce Enlarging/Reducing the quality depending on the image size. Press (zoom in) or (zoom ou
Résumé du contenu de la page N° 20
Changing the settings of the auto power on/off function z Tips 1 Press MENU, B/b to select the (Settings) tab. x During operation 2 Press v/V to select [Auto Power ON/OFF], and then The power is turned off press (ENTER). automatically at the time you set for [Power-OFF timer]. x During the standby mode The power is turned on automatically at the time you set for [Power-ON timer]. 1Press v/V to select [Power-ON timer] or [Power-OFF timer] , (ENTER). 2Press v/V to select [Enable] ,
