Résumé du contenu de la page N° 1
LTC0500
Digital Black & white Camera
Installation manual
Installationsanleitung
Manuel d’installation
Manuale d’installazione
Installatiehandleiding
Manual de instalación
Subject to changes without notice.
© Philips I&C 1999
3122 165 21862
Résumé du contenu de la page N° 2
Contents Contents FCC Statement ________________________________________________ 2 GB English ........................................................1 Important Safeguards____________________________________________ 3 D Deutsch ....................................................19 1. Introduction ________________________________________________ 6 Français ....................................................37 F 2. Features ____________________________________________________ 6 Italiano .......
Résumé du contenu de la page N° 3
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following WARNING two conditions: TO PREVENT FIRE OR SHOCK HAZARD, DO (1) This device may not cause harmful interference. NOT EXPOSE THIS UNIT TO RAIN OR (2) This device must accept any interference received including interference that may MOISTURE. cause undesired operation. The Camera series (LTC0500/60 and LTC0600/60) are provided with a correct polarized This equipment has been tested and found to c
Résumé du contenu de la page N° 4
9) Ventilation - Openings in the enclosure, if any, are provided for ventilation and to d) If the unit does not operate normally by following the operating instructions. ensure reliable operation of the unit and to protect it from overheating.These Adjust only those controls that are covered by the operating instructions, as an openings must not be blocked or covered.This unit should not be placed in a built-in improper adjustment of other controls may result in damage and will often require ins
Résumé du contenu de la page N° 5
6 Introduction Pr 7 eparation 1 3 The LTC 0500 series digital Black & White camera offers an extremely high level of picture This manual describes how to install the hardware and how to use your video camera. quality and resolution for use in surveillance and observation systems. It supports passive (DC) iris, video iris and manual iris lenses.The camera is suitable for C mount and CS Check that the following items are present in the box: mount lenses.The camera automatically detects and adapts
Résumé du contenu de la page N° 6
Mounting the lens 8 5 Lens connector specifications (rear view): The camera supports Manual Iris,Video Iris and DC Iris lenses. The use of Video or DC Iris lenses is recommended for outdoor use to prevent bleaching of the CCD. VIDEO IRIS DC IRIS 2 1 2 1 21 21 Lens mount, lens thread The lens mount should be C mount or CS mount (1”-32UN). No CS/C adapter is 43 43 4 required when using C mount lenses. 3 4 3 1 = 9VDC 40 mA max. 1 = Damping coil - Auto Lens Detection 2 = N.C. 2 = Damping coil + At p
Résumé du contenu de la page N° 7
Back f 10 ocus adjustment Electrical Connections 11 6 7 The back focus screw is an ‘endless’ screw that turns the back focus ring.Turning the 7.1 AC MAINS POWER SUPPLY screw in either direction will move the sensor chip back and forth from C mount position to CS mount position. Mains Voltage models: LTC0500/50 CCIR LTC0500/60 EIA C - CS Power cable & inner conductors Mount Camera models /50 are fitted with 2 wire power cable with Euro plug. LENS Digital Camera • Brown: Live, Reference line loc
Résumé du contenu de la page N° 8
13 Mounting the camera 8 7.3 VIDEO CONNECTIONS BNC composite video Sync. Input Video output Video output Balanced 4 pin connector Top mounting: 1/4” 20 UNC 1 2 (selectable via PC software) Max lens weight: 0.5 kg 3 4 + – 7.4 SYNCHRONIZATION H-V LOCK Balanced CVBS OUT Digital Camera CONNECTION (SYNC) The vertical and horizontal camera RS232 4 synchronization signals can be generated: • internal x-tal; 5 4 3 2 1 • by the mains supply or t
Résumé du contenu de la page N° 9
9.2.1 Mode setting The camera is delivered operating in Mode 1. Mode 3 Default mode 30 sec. Default Default In total three modes are available. Mode 2 Mode 1 = Backlight compensation Mode 1 Mode 2 = Traffic Default mode Mode 3 = Night (low light mode) Mode 0 is a non-programmable mode (Default mode) in which factory settings are stored. 9.2.2 Video level setting Digital Camera The nominal video level setting is 700 mV contrast. Adjustments are possible in +30/-30 steps. Mode LVL BLC 9.2.3 Backli
Résumé du contenu de la page N° 10
9.2.7 H Phase Automatic shutter: up to 1/100,000 sec. 2 This function is active when the camera operates with external synchronisation (H+V). Selectable ): ON, OFF, Flickerless Use the H-phase setting to adjust Horizontal timing differences when cameras are H-V synchronised. Input standard CVBS synchronisation signals. Manual shutter: 1/60 up to 1/10,000 2 Selectable ): 9.2.8 ext V Phase This function is active when the camera operates with external synchronisation. Auto Black: ON, OFF 2 (Extern
Résumé du contenu de la page N° 11
Inhalt MECHANICAL FCC-Konformitätserklärung ____________________________________________ 20 Dimensions: 65 x 70 x 149 mm (HxWxD*) * including connectors Wichtige Sicherheitshinweise __________________________________________ 21 Weight: 0.6 kg 1 Camera mounting: Top and Bottom / ” 20 UNC 1. Einleitung ________________________________________________________ 24 4 Lens mounting: C & CS Lens weight: 0.5 kg top mounting, 1.5 kg bottom mounting 2. Merkmale ____________________________________________
