Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Table of Contents Overview 3 Read before use �������������������������������������������������������������������������������������������������������������������������������������� 3 Package
Résumé du contenu de la page N° 3
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Overview VIVOTEK PZ7131 (PoE) / 7132 (WLAN), equipped with a pan-focus 2�6x optical zoom lens, is a cost-effective pan/tilt/zoom network camera for indoor surveillance applications such as retail stores� It integrates a 2�6x motorized pan-focus zoom module, which can easily zoom in and out to view near or distant objects� With a 350-degree horizontal and 125-degree vertical range of capture, it effectively gives users a wi
Résumé du contenu de la page N° 4
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Physical description Front panel Lens Built-in Microphone Status LED Rear panel Antenna (PZ7132 only) Microphone in Ethernet 10/100 Audio out RJ45 socket Power cord socket Indented reset button Mic. In Audio Ext. Int. Out 12VDC Ethernet Ext. I/O General I/O External/Internal terminal block Microphone switch General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect exter
Résumé du contenu de la page N° 5
VIVOTEK - A Leading Provider of Multimedia Communication Solutions DI/DO Diagram Pin 1~4 are used to connect with digital input and digital output devices � Refer to the following illustration for connection method� 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Status LED The color of LED indicates the status of the Network Camera� Status LED Color Description Blinking red Power is being supplied to the Network Camera. Steady green The Network Camera is booti
Résumé du contenu de la page N° 6
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Hardware Reset Mic. In Audio Ext. Int. Out 12VDC Ethernet Ext. I/O Mic. In Audio Ext. Int. Out Ethernet Ext. I/O 12VDC There is an indented reset button on the side panel of the Network Camera � It is used to reboot the Network Camera or restore the Network Camera to factory default Sometimes rebooting � the Network Camera could set the Network Camera back to normal state� If the problems remain after rebooted, restore
Résumé du contenu de la page N° 7
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Installation Hardware installation Follow the steps below to install the Network Camera to the ceiling: 1 � Attach ceiling mount bracket A to the Network Camera and secure it with two small screws� 2� Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes� 3� Fasten ceiling mount bracket B to the ceiling with three screws� 4 Slide the Network Camera into ceiling mount bracket B � � 5� Secure ceilin
Résumé du contenu de la page N° 8
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 RE LC IN EK IVE POWER COLLISION 1 2 3 4 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera to Internet connection� 1� If you have external devices such as sensors and alarms, make connection from general I/O terminal block� 2� Connect the camera to a switch via Ethernet cable� 3� Connect the s
Résumé du contenu de la page N° 9
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192168 � 0 � �3, please forward the following ports for the Network Camera on the router � ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router � For information on how to fo
Résumé du contenu de la page N° 10
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set up the Network Camera through Power over Ethernet (PoE) (PZ7131 only) When using a PoE-enabled switch The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable� If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/ro
Résumé du contenu de la page N° 11
AP PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set up the Network Camera through Wireless Connection (PZ7132 only) 1 Check the SSID currently set on your wireless access point (AP) � � 2. Go to PZ7132's Configuration > Advanced mode > Wireless. 3 � Type in the SSID consistent with the setting on your AP � 4� Select the Wireless mode as "Infrastructure"� 5� Click Save� The Network Camera starts to reboot� 6 W � ait for the
Résumé du contenu de la page N° 12
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Software installation Installation Wizard 2 (IW2), free-bundled software packaged in the product CD, helps to set up your Network Camera in LAN� 1� Install the IW2 under the Software Utility directory from the software CD � Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct analyses on your network environment � After your network environment is analyzed, please click Next
Résumé du contenu de la page N° 13
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using web browsers Make use of Installation Wizard 2 (IW2) to access to the Network Cameras in LAN � If your network environment is not in LAN, follow the steps to access the Network Camera: ® 1� Launch your web browser (ex� Microsoft Internet
Résumé du contenu de la page N° 14
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ► By default, the Network Camera is not password-protected. To prevent unauthorized accesses, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 27� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable your ActiveX Controls for your b
Résumé du contenu de la page N° 15
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using RTSP players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch a RTSP player � mpegable Player 2. Choose File > Open URL. An URL dialog box will pop up. 3. The format is rtsp://:/
Résumé du contenu de la page N° 16
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using 3GPP-compatible mobile devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed from the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8� To utilize this feature, please check the following settings on your Network Camera: 1 Because most players on 3G
Résumé du contenu de la page N° 17
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using VIVOTEK recording software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software; then launch the program to add the Network Camera to the Channel list� For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it at http://w
Résumé du contenu de la page N° 18
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Main Page This chapter explains the layout of the main page � It is composed of the following sections: Logo of VIVOTEK INC, Host name, Camera control panel, Menu, and Live video window � � Logo of VIVOTEK INC. Host name Camera control area PTZ control area Live view window Configuration area Logo of VIVOTEK INC. Click this logo to visit VIVOTEK website� Host name The host name can be customized to fit your needs. For more in
Résumé du contenu de la page N° 19
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Pan: Click this button to start the auto pan� When the current position is Home or on the left side of Home, the camera starts panning from the current position to the left-most position, then to the right- most position, and finally backward to the original position. When the current position is on the right side of Home, the camera starts panning from the current position to the right-most position, then to the left- most
Résumé du contenu de la page N° 20
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Video title: The video title can be configured. For more information, please refer to Video settings on page 52� MPEG-4 protocol and media options: The transmission protocol and media options for MPEG-4 video streaming. For further configuration, please refer to Client Settings on page 22� Time: Display the current time. For further configuration, please refer to Video settings on page 52� Title and time: Video title and time
