Résumé du contenu de la page N° 1
ViviCam T327 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Résumé du contenu de la page N° 2
Contents Introduction .................................................................................................................................. 2 What‟s Included ............................................................................................................................ 2 Parts of the Camera ..................................................................................................................... 3 Initial Camera Setup .....................................
Résumé du contenu de la page N° 3
Introduction Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. Please read this manual carefully first in order to get the most out of your digital camera. What’s Included 1. Digital Came
Résumé du contenu de la page N° 4
Parts of the Camera 1. Power Button 12. ViviLink / Down Button 2. Shutter Button 13. Microphone 3. LCD Screen 14. Flash Light 4. LED / Charge Lamp 15. USB Slot 5. Zoom In 16. Tripod Socket 6. Zoom Out 17. Digital Lens 7. MODE Button 18. Battery Compartment 8. SET Button 19. Memory Card Slot 9. Scene / Left Button 20. Focus lamp 10. Flash / Up / Slideshow 21. Viewfinder 11. Delete / Right Button 22. Wrist Strap Connector 3
Résumé du contenu de la page N° 5
Initial Camera Setup Installing the Battery Installing the Memory Card - + To Charge the Battery: Insert the battery as shown above. Make sure the polarity is correct. Power off the camera. SD Memory card Connect the camera with the USB cable (up to 32GB) either to the AC charger or to the needed for normal use. computer. Insert as shown above Charge light will turn off when battery is until a click is heard. fully charged. Turning On the Ca
Résumé du contenu de la page N° 6
When powering the camera ON for the first time the camera will take you through the INITIAL CAMERA SETUP: Powering the Camera ON 1) Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. 2) Make sure an SD card has been inserted into your camera. 3) Press the POWER button to turn on the camera. The camera will be in Photo Capture mode to start. Powering
Résumé du contenu de la page N° 7
Setting the Date and Time The next step in the initial camera setup is to set the date and time on the camera. Set the Date and Time as Desired and press the SET button to confirm the selection and move to the next part of the camera setup. Setting the ViviLink Default Option Once the Date and Time have been set, you will be asked to set the default ViviLink destination for photos and videos taken with your camera. The ViviLink technology allows you to quickly and easi
Résumé du contenu de la page N° 8
Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the “Shutter” button. The picture will be automatically saved to your camera‟s memory card. To access the various menus
Résumé du contenu de la page N° 9
Camera Technical Specifications Image Sensor CMOS Sensor (8M) 3264 x 2448 pixels, (7M HD) 3648 x 2048 pixels, (5M) 2592 Image Resolution x 1944 pixels, (3M) 2048 x 1536 pixels, (2M HD) 1920 x 1080 pixels and (VGA) 640 x 480 pixels Video Resolution 640X480 pixels (30 fps), 320X240 pixels (30 fps) File Format JPEG/AVI Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 2.7 Inch TFT Lens f=36-108mm F2.8-4.8 Zoom 4X Digital Zoom Exposure -3.0EV ~ +3.
Résumé du contenu de la page N° 10
Computer System Requirements – WINDOWS OS To be able to download photos and videos to your PC, you will need the following minimum configuration: Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7 512 MB RAM, with 100MB of free disk space 1024 x 768 Recommended screen resolution 16-bit color or higher display adaptor CD-ROM Drive QuickTime 6 or higher Microsoft Internet Explorer 7 or higher Windows Media Player 10 or higher
Résumé du contenu de la page N° 11
Changing Camera Mode Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera. 2) Video Capture Mode - Use this mode to capture videos with your camera. 3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera. When the camera is first powered ON, the Photo Capture Mode will be active. The icons that appear on the LCD screen are the best default settings so that you c
Résumé du contenu de la page N° 12
5) If the selection can be remembered by the camera, a selection icon will appear to the right of the selected menu option. Changes made to these options will remain as is until you decide to change them again at a later time. 6) Some menu options are single-use functions that are not remembered by the camera and do not display this icon when selected. 7) At any time you can press the MODE button to exit the menus and return to the previous screen. Photo Capture Mode The Photo Capture
Résumé du contenu de la page N° 13
Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in the sequence. To change the Flash mode, press the Up Quick Function button until you arrive at your desired settings. A Forced Off (Default) Auto Flash Forced On Red Eye Hide/Show the LCD Icons The display of the icons on the LCD screen can be hidden or visible as desired. 1) Hold the MODE button for 2 seconds to hide the display of the icons on
Résumé du contenu de la page N° 14
Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET button to select the desired option. 5) A selected option icon will appear on the selected item.
Résumé du contenu de la page N° 15
Image Resolution Menu The Image Resolution menu allows you to choose the desired size of the images taken by your camera. Keep in mind that images with a higher resolution will also take up more of your camera‟s memory. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET button to sel
Résumé du contenu de la page N° 16
Self-Timer Menu The Self-Timer menu allows you to set a delay between the time that the camera‟s shutter button is pressed and the actual capture of the picture. This is an optimal feature if you don‟t just want to take the picture but would also like to be in the picture yourself. Just set the desired self-timer delay, press the shutter button on your camera and position yourself in front of the camera as desired. 1) Press the SET button to open the menus for the current mode. 2) Press
Résumé du contenu de la page N° 17
9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Face Detect Menu The Face Detect feature when set to „On‟ allows the camera to use a subject‟s face as the basis for balancing the other colors and focus in the camera‟s display. This feature is meant to ensure that the color and focus of your pictures will be consistently sharp and high-quality. Note: To properly use the Face Detect option,
Résumé du contenu de la page N° 18
Smile Capture Menu The Smile Capture feature when set to „On‟ allows the camera to automatically take a picture when it detects that a subject in the picture is smiling. Note: To properly use the Smile Capture feature, please ensure the following: Macro mode off – Smile Capture will not work if the camera is in Macro mode. Select the Macro „Off‟ option in the Macro menu. The mountain icon will appear on the LCD. Anti-Shake - Ensure that the Anti-Shake option is set to „On‟. The Ant
Résumé du contenu de la page N° 19
Macro Menu With the Macro feature, you can capture images at close range (30 ~ 45 cm). When enabled, the Macro mode will allow your camera to focus on an object that is very close to the camera. The flower icon will appear on the LCD and indicates that the Macro mode is on. Note: The Macro mode must be turned off when you want to use the following features of your camera: Flash, Face Detect and Smile Capture. To turn Macro mode off, select the Macro „Off‟ option. The mountain icon wil
Résumé du contenu de la page N° 20
4) Press the SET button to select the desired option. 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Color Effect Menu
