Instruction d'utilisation Toshiba CCD IK-6200A

Résumé du contenu de la page N° 1

SECTION 1 GENERAL DESCRIPTION
IMPORTANT SAFEGUARDS
1. Read Instructions
INSTRUCTION MANUAL
All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions
The safety instructions and instruction manual should be retained for future reference.
3. Heed Warnings
All warnings on the product and in the instruction manual should be adhered to.
4. Follow Instructions
CCD COLOR CAMERA
All operating and use instructions should be followed.
5. Cleaning
IK-6

Résumé du contenu de la page N° 2

1. COMPONENTS: 2. CONNECTION AND OPERATIONS (1) Camera 1 Notes on connecting (2) Accessories Power plugs of connected equipment must be disconnected before (a) Lens Connector 1 (E4-191J-100(M)) installations. (b) Instruction Manual 1 A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard (c) Lens Cap 1 connection. For details of wiring and operation of equipment to be connected, refer to their operation manuals. Lenses, coaxial cables for video signals and the power cord are not suppli

Résumé du contenu de la page N° 3

5. AUTOMATIC ELECTRONIC SHUTTER (AES) 7. NOTES ON USE AND INSTALLATION Exposure time is controlled automatically within a range of 1/60 sec. to 1/ Do not aim the camera at the sun 100000 sec. to obtain an adequate signal when the back panel switch is Do not aim the camera at the sun or point it at sun even if you are not turned to AES. shooting. Do not shoot intense light When the back panel switch is turned to VIDEO or DC, the exposure time is Intense light such as a spotlight may cause a bloom

Résumé du contenu de la page N° 4

10. CAMERA INSTALLATION GUIDE Wall 9.5mm Camera Installation Guide 1/4"-20UNC 112 15 The Installation Guide is for reference only. EIM-0010325 4/26/2000 Bracket is not be enclosed. 1-4 4 80