Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
COLOR CAMERA C-CV14-2 NTSC
C-CV14-2 PAL
Thank you for purchasing TOA’s Color Camera. Please carefully follow the instructions in this manual in
order to ensure long, trouble-free use of your color camera.
Résumé du contenu de la page N° 2
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ................................................................................ 3 2. GENERAL DESCRIPTION ............................................................................. 4 3. HANDLING PRECAUTIONS .......................................................................... 4 4. NOMENCLATURE ............................................................................................. 5 5. INSTALLATION .............................................
Résumé du contenu de la page N° 3
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section in order to ensure long, trouble-free operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings regarding safety. • After reading, keep this manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages are used in this manual to prevent bodily injury and property damage which could resu
Résumé du contenu de la page N° 4
NTSC complies with Part 15 of the FCC Rules. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Ho
Résumé du contenu de la page N° 5
4. NOMENCLATURE 5 4 1 2 3 6 24V 12V + - IRIS OFF ON FOUCUS ADJ BLC SHUTTER H L VIDEO OUT 7 8 9 10 11 (1) Vari-focal lens (7) Iris control (2) Focus ring (8) Video output terminal (BNC) (3) Zoom ring (9) Mode setting switch (4) Camera mount (10) Lens cover (5) Camera mount fixing screw (11) Camera mount fixing hole (6) Power input terminal (24 V AC or 12 V DC) Note Fixing holes (11) are provided in both the top and bottom panels. 5
Résumé du contenu de la page N° 6
5. INSTALLATION [Ceiling mounting example] [Wall mounting example] Ceiling panel Camera mounting bracket (optional) Wall Lock lever Pedestal Camera mount Camera mounting bracket (optional) Wall WARNING Camera mounting bracket (optional) Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury. 1. Mount the optional camera mounting bracket to a ceiling or wa
Résumé du contenu de la page N° 7
5.1. Lens Cover Attachment and Detachment To detach, lightly press on both the top and bottom of the lens cover and pull it forward. To attach, align the clips inside the lens cover with the corresponding camera tabs, then press on the cover. Press on this section (top and bottom, 2 places) and pull forward to detach the lens cover. Inside of the lens cover Lens cover Clips Tabs (left and right) fit into cover clips, which snap into holes when correctly attached. 6. CONNECTIONS Note: If the
Résumé du contenu de la page N° 8
7. ADJUSTMENT 1. Switch on the camera power after completing camera connections. Power is supplied to the camera. 2. Normally,set the Shutter Speed switch to "1/60"(NTSC) or "1/50"(PAL) position. Flickering of the picture may interfere with the view under fluorescent lamp in the area with power frequency of 50 Hz(NTSC) or 1/60 Hz(PAL). In such cases, set the switch to "1/100"(NTSC) or "1/120"(PAL) position, and the image free from flickering can be obtained. Note If the Flicker Reduction switch
Résumé du contenu de la page N° 9
8. ABOUT THE MODE SETTING SWITCH Set the Mode Setting switch for the best possible picture reproduction depending on installation conditions. Mode Setting Switch (Factory-preset setting) 24V 12V OFF ON + - Adjustment switch IRIS OFF ON FOUCUS ADJ BLC Backlight Compensation switch SHUTTER L H Shutter Speed switch (NTSC) 1/60 1/100 (PAL) 1/50 1/120 VIDEO OUT 8.1. Adjustment Switch Set this switch when adjusting the lens focus.(Provides the same effect as when using the ND filter.)
Résumé du contenu de la page N° 10
9. IF YOU THINK THERE IS A FAILURE: (TROUBLESHOOTING) Symptom Possible Cause Remedy Camera images are • The monitor’s power switch is not • Turn on the power switch. not displayed on the set to ON. monitor. • Cables are not correctly connected. • Connect correctly. • The BNC plug is not correctly • Solder correctly. soldered. • Power is not supplied to the • Switch on the power. camera. Pictures are not clear. • The lens is not properly focused. • Adjust the lens. • The lens is dirty. • Wipe t
Résumé du contenu de la page N° 11
10. SPECIFICATIONS Model No. C-CV14-2 (NTSC) C-CV14-2 (PAL) Power Source 24 V AC, 50/60 Hz, or 12 V DC Power Consumption 2 W Image Device 1/4” IT-CCD Number of Effective Pixels 768 (H) x 494 (V), 380,000 pixels 752 (H) x 582 (V), 440,000 pixels Scanning System 2:1 interlace Scanning Frequency 15.734 kHz (H), 59.94 Hz (V) 15.625 kHz (H), 50 Hz (V) Video Output VBS1.0 V(p-p), 75 Ω , BNC connector Synchronizing System Internal synchronization Resolution H: 480 lines (center), V: 350 lines H: 470 li
Résumé du contenu de la page N° 12
Printed in Vietnam 133-12-869-5D
