Résumé du contenu de la page N° 1
Digital Camera/VTR
AJ- P
AJ- P
Operating Instructions
Résumé du contenu de la page N° 2
RBRC For your safety FCC NOTE: CAUTION This device complies with Part 15 of the FCC Rules. To assure continued compliance follow
the attached installation instructions and do not make any unauthorized modifications. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). This equipment has been tested and found to NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. comply with the limits for a Class A digital
Résumé du contenu de la page N° 3
Contents Safety Precautions . . . . . . . . . . . . . . . . 2 Using the AJ-MC700P Microphone Kit (Option) Mounted to the Main General and Features . . . . . . . . . . . . . . 5 Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Features of the Camera Section . . . . . 5 Mounting the AJ-MH700P Microphone Features of the VTR Section . . . . . . . 8 Holder (Option) . . . . . . . . . . . . . . . . . 38 System Configuration . . . . . . . . . . . . . . 9 Using the Microphone not Mounted
Résumé du contenu de la page N° 4
Contents Adjusting the Time and Date . . . . . . . . . 62 Playback—Checking Recorded Contents Rec Review. . . . . . . . . . . . . . . . . . . . . 94 Adjustments and Setup During Recording Color Playback . . . . . . . . . . . . . . . . . . 94 Adjustments and Setup Using the Setting Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Connection With an External VTR. . . . . 95 Setting the Gain Selector Value . . . . . 64 Recording Simultaneously with the Selecting Functions . . . . .
Résumé du contenu de la page N° 5
General and Features This unit combines into a single integrated unit a 3-CCD color video camera, which features M-FIT CCDs and a 520,000-pixel on-chip lens, with a DVCPRO format VTR equipped with com- pression technology. Not only can the screen aspect ratio be switched between 16:9 and 4:3 in a single action but the rate at which the signals are recorded onto the VTR tape can also be set to 50 Mbps for a higher picture quality or 25 Mbps for a longer recording duration. Recording at the 50 Mbp
Résumé du contenu de la page N° 6
General and Features Automatic adjustment and memory functions for black balance/white balance The black set, black balance and white balance can be automatically adjusted by simple switch operations. Adjustment values are held in the memory even if the power for the unit is turned off, so there is no need to readjust the balance each time the power is turned on. There are two memory systems for white balance which can hold 3 adjustment values each for the CC filter (cross filter is the same as
Résumé du contenu de la page N° 7
Functions and circuits for assuring high picture quality The unit is equipped with the following functions (and circuits) in order to assure high picture quality and is designed to make the fullest use of the advantages of the high-performance CCD. A built-in AUTO KNEE circuit achieves a wide dynamic range which allows large signals to pass through. A built-in 2-line image enhancer A built-in shading compensation function for use with a lens extender A built-in sawtooth wave generator for ad
Résumé du contenu de la page N° 8
General and Features Features of the VTR section Digital system The VTR section features a component digital recording system that employs the latest com- pression technology and non-compressed PCM recording for audio. This system provides supe- rior S/N, frequency band and waveform characteristics as well as reproduction of detailed areas, etc., and realizes even higher picture and sound quality. One of the following 4 modes can be selected for conducting recording and playback: 16:9 (50 Mbps),
Résumé du contenu de la page N° 9
System Configuration Microphone kit Wireless Shoulder 26P/12P VTR cable VTR AJ-MC700P microphone belt output receiver adaptor WX-RA700 AJ-YA900P 1.5 viewfinder Multi connector AJ-VF10P/-VF15P cable SHAN-C12TCA 2.0 viewfinder (The viewfinder is an optional AJ-VF20WP Battery case Panasonic Battery accessory with the AJ-D900WA.) SHAN-B220 AU-BP220 Microphone holder Sony Battery AJ-MH700P NP-1 Battery Battery case Panasonic Battery Lens charger AU-M402H AU-BP402 (Bayonet type) AG-B425 Fujinon/Cano
Résumé du contenu de la page N° 10
Controls and Their Functions 1 4 2 3 Power Supply Section Battery holder The battery pack (option) made by Anton Bauer is mounted onto this holder. DC IN (external power input) connector (XLR, 4P) The AJ-B75 AC adaptor (option) is plugged into this socket when the unit is to be operated by AC power. An external battery is plugged in when an external battery is to be used to operate the unit. BREAKER (circuit breaker) button In order to protect the equipment, the circuit breaker is tripped
Résumé du contenu de la page N° 11
6 5 5 7 9 8 n q p o Accessory Mounting Section Hook for mounting shoulder belt Attach the accessory shoulder belt to this hook. Light shoe Mount the video light, etc. onto this shoe. Lens mount (bayonet type) Mount the lens here. Lens clamping lever Insert the lens into the lens mount , and turn the lens mount ring using this lever to clamp the lens. Lens mount cap Press up the lens clamping lever to remove this cap. Keep the cap in place if the lens is not going to be mounted. Le
Résumé du contenu de la page N° 12
Controls and Their Functions s Audio Function Section (1) r AUDIO LEVEL CH1 (audio channel 1 recording level) control When the AUDIO SELECT CH1/CH2 switch is set to MAN, the recording level of audio channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control on the side panel. MIC IN (microphone input) jack (XLR, 3-pin) Connect an optional microphone to this jack. The power for the microphone is supplied from this jack. AUDIO LEVEL CH1/CH2 (audio channel 1/2 re
Résumé du contenu de la page N° 13
| } ~ t u v ° w † x z y ° { Audio Function Section (2) ALARM (warning tone volume) control This adjusts the warning tone volume heard from the speaker or the earphone connected to the PHONES jack . When it is set to the lowest position, the warning tone is not audible. However, by making changes to the inside parts, the tone can be made audible even when the control is at its lowest position. MONITOR (volume) control This adjusts the volume of the sound other than the warning tone—the s
Résumé du contenu de la page N° 14
Controls and Their Functions © ¢ £ ¶ § • Shooting (Recording)/Playback Function Section (1) Viewfinder Black-and-white images can be seen in the viewfinder during recording and playback. Warn- ings and messages relating to the unit’s operating status and settings, zebra pattern, markers (safety zone marker, center marker), etc. can also be seen. ! PEAKING control This is used to adjust the contours of the images inside the viewfinder to facilitate focusing. It does not affect the camera’s out
Résumé du contenu de la page N° 15
´ ® ™ ß ¨ ≠ Æ Shooting (Recording)/Playback Function Section (2) * CC/ND FILTER (filter selector) knob This selects the filter to match the light source which is illuminating the subject. If the setting of this knob is changed when the menu display mode has been set to “3” (de- fault setting), the new setting will appear for about 3 seconds on the setting change message display area of the viewfinder screen. The knob and filter settings are listed below. Filter Description Example of filter se
Résumé du contenu de la page N° 16
Controls and Their Functions ≥ ≤ Ø ∞ ± Shooting (Recording)/Playback Function Section (3) . OUTPUT (output signal selector)/AUTO KNEE switch This switch selects the video signals which are to be output from the camera unit to the VTR unit, viewfinder and video monitor. The AUTO KNEE function can be used when the images shot by the camera have been selected. OUTPUT/AUTO KNEE switch setting positions BARS Color bar signals are output. The AUTO KNEE circuit is not activated. Set the switch to thi
Résumé du contenu de la page N° 17
µ ∂ ¥ 1 ECU REMOTE (remote control) connector (6-pin) Connect the AQ-EC1 extension control unit (option) here. Note The POWER switches on unit and extension control unit must be set to OFF before the re- mote control cable is connected or disconnected. 2 26-pin/12-pin output adaptor (option) (See page 98 for mounting method.) The 26-pin/12-pin output adaptor AJ-YA900P (option) is mounted on this section. When the portable VTR is connected as the external VTR, recording can be performed simulta
Résumé du contenu de la page N° 18
Controls and Their Functions ª ∫ π ∑ ∏ º Shooting (Recording)/Playback Function Section (4) 5 VTR START button When this pressed, recording commences; when it is pressed again, recording stops. This button has the same function as the VTR button on the lens side. 6 VTR SAVE/STBY (tape protection) switch This selects the power supply status while the VTR recording is temporarily stopped (REC PAUSE). SAVE: This is the tape protection mode. The cylinder is stopped in the half-loading status. Compar
Résumé du contenu de la page N° 19
¿¡Ω ø æ ¬ ; EJECT (cassette eject) button Press this to insert or eject the cassette. < REW (rewind) button Press this to rewind the tape. Its lamp lights during rewinding. If this button is pressed during playback, the playback images are rewound at approximately quadruple speed while the button is held down. = FF (fast forward) button Press this to fast forward the tape. Its lamp lights during fast forwarding. If this button is pressed during playback, the playback images are fast forwarded at
Résumé du contenu de la page N° 20
( ) ( ) ( ) Controls and Their Functions Ã Õ Œ » √ ƒ ≈∆ « –œœ Menu Operation Section A Setup card insertion slot The optional setup cards are inserted into this slot. B MENU SET/OFF switch This displays the setting menu on the viewfinder screen through VIDEO OUT connector. SET: The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first of the pages which can be displayed appears.) OFF: The
