Résumé du contenu de la page N° 1
1
Résumé du contenu de la page N° 2
Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Certifications This equip
Résumé du contenu de la page N° 3
1.Introduction 5 2.Package Contents 6 3.System Requirements 7 4. Hardware Installation 4.1 LEDs and Focusing 8 4.2 Camera Ports 9 4.3 Installation Procedures 10 5.Software Installation 11 6.Using the Administrator’s Utility 18 6.1 General Settings 19 6.2 De
Résumé du contenu de la page N° 4
8. Web Connection and Setup 53 8.1 Camera Settings 54 8.2 Network Settings 55 8.3 Wireless Settings 62 8.4 Password Settings 65 9.Frequently Asked Questions 66 10.Technical Specifications 67 11. Appendix A: How to View Your Camera via the Internet 68 12. Appendix B: Viewing via UPnP in Windows XP 74 4
Résumé du contenu de la page N° 5
TM Thank you for purchasing the HNC290G. The Net-Vision Wireless-G Network Camera is a high performance stand- alone camera that enables remote monitoring, surveillance, and viewing of live video from both within your local area network (LAN) and from outside the network via the Internet. Unlike “web cameras”, which require an attached PC for operation, the HNC290G connects directly to the network and has its own IP address, thereby allowing users to access the video from anywhere on the ne
Résumé du contenu de la page N° 6
Unpack and Inspect Open the package and carefully remove all items. The complete HNC290Gpackage consists of: TM One Net-Vision HNC290G Wireless 802.11b/g Network Camera One CD with Easy-Installation Quick Setup Wizard and Utilities One Quick Installation Guide One DC Power Adapter One External Wireless Antenna One Camera Stand/Mounting Kit One Hosted Video Management (powered by D3Data) installation sheet Please check to make sure that the unit was not damaged during shipping an
Résumé du contenu de la page N° 7
The system requirements for PC or Notebook PC users to access the HNC290G are: OS System: Windows 98SE, ME, NT, 2000, XP, Server 2003 CPU: Intel Pentium III 750MHz or above, or Intel Celeron 1GHz or above Memory Size: 128MB (256MB recommended) VGA Card Resolution: 800 x 600 or above 7
Résumé du contenu de la page N° 8
4.1 LEDs and Focusing The camera head and its focus ring allow you to modify the aim and focus of the camera. To adjust the camera’s focus, rotate the dark focus ring in either direction until the desired viewing area or object becomes sharp/clear. There are four LEDs that indicate camera and network status: Power The LED will be lit orange when the device is powered on and ready for access. Link When the camera is monitoring, the LED will be lit green. WLAN When the network camera is
Résumé du contenu de la page N° 9
4.2 Camera Ports The back panel of the network camera includes three ports and a Reset button. Antenna Connector This is a standard Reverse-SMA connector. Any antenna with a Reverse-SMA connector can be connected to the network camera. Power The “Power” port is where you will connect the network camera’s power adapter. LAN The LAN port is where you will connect the Ethernet network cable. Reset 1. If a problem occurs with the network camera, but you do not want to reset it to its orig
Résumé du contenu de la page N° 10
4.3 Installation Procedure 1. Unpack all of the contents from the network camera’s package and verify that all the items listed in the “Package Contents” chapter have been included. 2. Locate the antenna connector on the left side of the camera’s rear panel. Screw the base of the antenna (included with the HNC290G) into the antenna connector. 2 3. Locate the network cable connector (RJ-45 port) on the camera’s rear panel. Connect an Ethernet cable to the port. Connect the other end of th
Résumé du contenu de la page N° 11
Please follow the steps below to run the Install Wizard, which will guide you through the Administrator utility and Camera Viewer installation processes. The following installation procedure described here is for Windows XP. The installation procedures for Windows 98SE/Me/2000/Server 2003 are similar. 1. Insert the CD that was included in the network camera’s package into your CD-ROM drive. The “Autorun.exe” program should execute automatically and the following window will appear. If th
Résumé du contenu de la page N° 12
3. The InstallShield Wizard will begin the installation process. Click “Next” to continue with the installation. 4. If you wish to install the software program in an alternate location, click “Change”; otherwise, click “Next” to move on to the next step. 12
Résumé du contenu de la page N° 13
5. Click “Install” to begin installing the program. 6. The system will install the program automatically. 13
Résumé du contenu de la page N° 14
7. Click “Finish” to complete the software installation. 8. When the installation is completed, the system will auto run the “Administrator Utility”. On the first page, the cameras that can be found on the network are listed on the left side of the window. Select the one you would like to configure and click “Setting Wizard” to proceed. 14
Résumé du contenu de la page N° 15
Please Note: To install the Camera Viewer utility, you can follow the same steps you used to install the Admin utility. But this time, simply click on the “Install Viewer” option. 9. Please enter the default password of “1234”, and click “OK” to log in to the IP setup page. 15
Résumé du contenu de la page N° 16
10. As an alternate method to the Quick Setup Wizard, you can set up the network camera using the Admin utility. The network camera is connects and functions through the network (using the TCP/IP Protocol). Therefore, the camera’s IP address settings must be consistent with your network settings, or you will be unable to access it. The wizard program within the Admin utility will automatically detect the IP address status of your network and suggest a free IP address for the Camera. You c
Résumé du contenu de la page N° 17
12. The Camera Viewer will show the video automatically. You can now view the camera video through the network from this point on. 17
Résumé du contenu de la page N° 18
The Admin utility allows users to search for and set up the network cameras located within the Intranet or on the Internet. From the utility, users can view all of the selected cameras’ information. It also provides a Setting Wizard, which easily guides users through the process of installing network cameras on the network. (Remember that you can also install network cameras on the network using the Quick Setup Wizard that is located on the CD.) Please remember that you can only use the A
Résumé du contenu de la page N° 19
6.1 General Settings Note: This figure shows older camera models: the HNC230G and HNC210. This figure is meant for illustrative purposes only and the setup procedures for the HNC290G will remain exactly the same. LAN Auto Discover Click this button to have the Admin utility search for and automatically discover available cameras within the network. Camera List The camera list displays the camera name and setup status for each camera. This means the camera still has its default se
Résumé du contenu de la page N° 20
Internet Add Click “Add” and a window will appear for you to enter the IP Address of the camera that is available on the Internet. Delete Click “Delete” to delete the camera from the list. Camera List This list displays the camera name and its connection status. This means the camera is disconnected or not available on the Internet. This means that the camera is connected. Information of Camera Camera Information This portion of the window displays some of the selected camera’s importan
