Résumé du contenu de la page N° 1
English Version 1.1
Résumé du contenu de la page N° 2
User’s Manual Preface The information provided in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Notice To work with the PTZ cameras, any installer or technician must have the following minimum qualifications: • A basic knowledge of CCTV systems and components • A basic knowledge of electrical wiring and low-voltage electrical connections • Th
Résumé du contenu de la page N° 3
User’s Manual Warning Notices • Handle the camera with care Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Do not dismantle the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Contact a qualified service person for servicing. • Do not block cooling holes on the bracket This camera has a cooling fan inside. Blocking the cooling holes
Résumé du contenu de la page N° 4
User’s Manual Contents 1. Overview .................................................................................................................................... 5 1.1 Product Features............................................................................................................. 6 1.2 Product Application.......................................................................................................... 7 2. Connecting the PTZ Camera.......
Résumé du contenu de la page N° 5
User’s Manual 3.3.11 TITLE SETTING ................................................................................................ 30 3.3.12 ALARM SETTNG............................................................................................... 31 3.3.13 HOME SETTING ............................................................................................... 32 3.3.14 SEQUENCE .......................................................................................
Résumé du contenu de la page N° 6
User’s Manual 1. Overview The ZC-PT series integrated indoor PTZ camera is a new sub-compact model designed to deliver superb performance and durability combined with an intelligent and stylish housing that is suitable for any security and surveillance installation. The ZC-PT-XT series is a new weather resistant integrated outdoor PTZ camera. The ZC-PT and ZC-PT-XT series support a standard wiring concept for easy installation, and can be integrated with CCTV pro
Résumé du contenu de la page N° 7
User’s Manual The PTZ camera provides 8 alarm inputs and 2 alarm outputs, and the smart alarm management mechanism can be programmed using the OSD setup menu; certain functions (Preset/Sequence/Auto-Pan/Cruise) can be activated when an alarm is triggered. More than 10 built-in protocols including, GANZ-PT, GANZ-S, Pelco-D, -P, VCL, Philips, AD-422 (Manchester) etc. provide connectivity to other surveillance systems, allowing the integrated PTZ camera to be used i
Résumé du contenu de la page N° 8
User’s Manual Dynamic PTZ camera configuration • Flexible indoor and outdoor mountings • Compact lightweight design for easy installation • Weather resistant housing to protect against temperature, sunlight and rain Integrated enhanced Internet capability (optional) • Remote monitoring mode / system configuration / software upgrades • Incorporate active Windows applications 1.2 Product Application Connect the PTZ camera to other devices as shown in the d
Résumé du contenu de la page N° 9
User’s Manual 2. Connecting the PTZ Camera Please refer to the sections below for details of how to set and connect the PTZ camera. In order to control PTZ camera, a control keyboard or alternative control device is required. 2.1 Package Content Before proceeding, please check that the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer immediately for assistance. Indo
Résumé du contenu de la page N° 10
User’s Manual 2.2 Switch Definition The PTZ camera ID and communication protocol must be configured before connecting the camera to other devices. The switches used to configure these settings are located on the bottom of the PTZ camera. Indoor PTZ camera Outdoor PTZ camera A Reserved B Communication switch C PTZ camera ID switch D PTZ Camera Control Protocol E RJ-45 connector (for IP camera only) F 22-pin connector 2.3 Communication Switch Setting
Résumé du contenu de la page N° 11
User’s Manual be the same. The default RS-485 setting is half-duplex. Please do not change the default setting without seeking the advice of a qualified specialist or the supplier. Pin 3 and pin 4 are used for termination and line lock adjustment respectively. Pin 5 is mainly used after updating the software and changing protocol. RS-485 setting Half-duplex Full-duplex 2.4 PTZ Camera ID Setting Use the switch to change your PTZ camera ID by turning the arrow
Résumé du contenu de la page N° 12
User’s Manual Switch no. Protocol Baud rate 00 VCL 9600 01 Pelco D 2400 02 Pelco P 4800 04 Chiper 9600 05 Philips 9600 07 GANZ-PT 9600 08 AD422 4800 09 DM P 9600 11 Pelco D 4800 12 Pelco D 9600 13 Pelco P 2400 14 Pelco P 9600 16 GANZ-S 4800 17 GANZ-S 9600 18 GANZ-S 19200 19 GANZ-S 38400 *GANZ-PT is for ZC-PT series PTZ camera. GANZ-S is for ZC-S series PTZ camera. For example, select protocol Pelco D with a baud rate of 2400, the ID switch should be
Résumé du contenu de la page N° 13
User’s Manual 2.6 22-Pin Connector Definition A 50 cm data cable (as shown below) is supplied with the PTZ camera for quick installation, e.g. for demonstration or testing purposes. The cable design requires an additional alarm cable. The 22-pin connector definition is listed in the table below. Pin Definition Cable 1 AC24-1 20AWG 2 ALM NO 24AWG 3 AC24-2 20AWG 4 ALM NC 24AWG 5 FG 20AWG 6 ALM COM 24AWG 7 T+ 8 R- 9 T- 10 R+ 11 Alarm ISOG 1
Résumé du contenu de la page N° 14
User’s Manual 2.7 RS-485 Connector RS-485 is the interface that the PTZ camera uses to communicate with its control unit. Connect the control keyboard to the camera via the terminal block. The recommended cables for RS-485 communication are CAT 5 cables; the maximum cable length for wire with a gauge above 24 is 4000 feet (1219 meters). If the total cable length exceeds 4000 feet, using a repeater to amplify the signals is recommended. Cor
Résumé du contenu de la page N° 15
User’s Manual 3. Operation and Configuration 3.1 OSD Display Format The information shown on the screen is described in terms of the corresponding OSD display, its position and its function in the table below. 1 2 3 4 56 Position Function OSD display Description A Auto focus mode 1 Focus modes M Manual focus mode X Back light compensation OFF 2 Backlight B Back light compensation ON 3 Alarm ALARM Alarm message Current zoom ratio 4 Zoom ratio ×1 (Optica
Résumé du contenu de la page N° 16
User’s Manual 3.2 OSD Menu Tree The OSD setup menu structures for the 18×/26× model and the 22×/23× model are listed separately in the section below. The star symbol indicates the factory default. For a detailed function description, please refer to section 3.3 Configuration Menu. 3.2.1 18× / 26× Model Item Layer 1 Layer 2 Layer 3 Default DEFAULT , ON CAMERA BACKLIGHT , OFF AUTO AF mode , , Normal FOCU
Résumé du contenu de la page N° 17
User’s Manual Item Layer 1 Layer 2 Layer 3 Default HOME FUNC. , OFF SELECT MODE PRESET ☆ SEQUENCE AUTOPAN CRUISE PRESET POINT <001> ~ <256> 001 HOME SETTING SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> RETURN TIME <001> ~ <128> min. 001 GO ENTER EXIT SEQUENCE LINE <1> ~ <8> 1 SEQUENCE POINT <01> ~ <32> 01 PRESET POS. <001> ~ <255>, 001 SEQUENCE SPEED <01> ~ <15> 01 DWELL TIME <000> ~ <127> sec. 000 RUN SEQUENCE EXI
Résumé du contenu de la page N° 18
User’s Manual Item Layer 1 Layer 2 Layer 3 Default AUTOPAN CRUISE IR FUNC. NO FUNCTION PRESET POINT <1> ~ <256> SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> IR FUNCTION , SCHEDULE RESET YES SCHEDULE EXIT EXIT OSD YES 3.2.2 22× / 23× Model Item Layer 1 Layer 2 Layer 3 Default DEFAULT , ON CAMERA ON BLC level <000> ~ <100> BACKLIGHT OFF ☆ AUTO Focal length <1cm>, <10cm>, <30cm> <1m> 10 cm FOCU
Résumé du contenu de la page N° 19
User’s Manual Item Layer 1 Layer 2 Layer 3 Default PRESET POINT <001> ~ <256> 001 SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> ALWAYS DWELL TIME <001> ~ <127> sec., ALWAYS EXIT YES HOME FUNC. , OFF SELECT MODE PRESET ☆ SEQUENCE AUTOPAN CRUISE PRESET POINT <001> ~ <256> 001 HOME SETTING SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> RETURN TIME <001> ~ <128> min. 001 GO ENTER EXIT YES SEQUENCE LINE <1> ~
Résumé du contenu de la page N° 20
User’s Manual Item Layer 1 Layer 2 Layer 3 Default SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE EXIT+SAVE SCHEDULE SWITCH , OFF SCHEDULE POINT <01> ~ <32> 01 SCHEDULE HOUR 00 SCHEDULE MIN 00 SCHEDULE MODE NONE ☆ PRESET SEQUENCE AUTOPAN CRUISE SCHEDULE IR FUNC. NO FUNCTION PRESET <1> ~ <256> SEQUENCE LINE <1> ~ <8> AUTOPAN LINE <1> ~ <4> CRUISE LINE <1> IR FUNCTION , SCHEDULE RESET SCHEDULE EXI
