Résumé du contenu de la page N° 1
Deluxe Power Grip for Canon 40D/50D
INSTRUCTION MANUAL
VIV-PG-50D
Résumé du contenu de la page N° 2
Limited One Year Warranty Vivitar warrants this quality product to be free of defects in material and workmanship for a period of one year from the date of purchase. During the period, Vivitar will repair or replace the product at no charge for parts or labor. TIME PERIOD OF THIS WARRANTY The time period of this warranty starts from the date of the original purchase and expires on the first anniversary date of purchase. WHAT IS NOT COVERED BY THIS WARRANTY No express or implied warranty is m
Résumé du contenu de la page N° 3
WHAT TO DO WHEN SERVICE IS NEEDED STEP 1. Package the product and relevant accessories carefully, using ample padding materials and a sturdy mailing container to prevent damage in transit. STEP 2. Include in package: a) Evidence of date and place of original purchase (for example, a copy of your sales receipt). b) Detailed description of your problem. c) When possible, a sample evidencing the problem. STEP 3. Return item (insured) to: Vivitar
Résumé du contenu de la page N° 4
Introduction Congratulations on your purchase of the VIV-PG-50D. The VIV-PG-50D is a battery grip for Canon EOS 50D, 40D, 30D and 20D digital SLR cameras. It is capable of holding two BP-511A or six AA sized batteries. It is also equipped with a vertical shutter button, a dial, an AE lock/FE lock button, and an AF point selection button which will enable shooting in the same way as a horizontal grip. Note: The E-1 hand strap (sold separately) can be used for enabling a more secure grip
Résumé du contenu de la page N° 5
A Quick Look at Your Device 1. Attachment Screw 2. Guide Pin 3. Attach/Detach Knob 4. Battery release lever 5. DC coupler cord mount 6. Battery compartment release lever 7. Electrical contacts 8. Camera battery compartment cover slot 9. Vertical grip ON/OFF switch 10. Vertical grip AE lock/FE lock/Index/Reduce 14. Vertical grip shutter button button 15. Vertical grip main dial 11. Vertical grip AF point selection/Magnify button 16. Hand strap mount 12. Battery compartment cover 1
Résumé du contenu de la page N° 6
Attaching Your Power Grip to Your Camera 1. Remove the battery that is in your camera (See figure 1 to the left.) 2. Detach the camera’s battery compartment cover. If you are using EOS 40D or 50D cameras: Place your camera on a desk or other flat surface and hold it firmly so that it does not drop. Next, pull the battery compartment cover while it is opened at a slanted angle to remove it. See figure 2-1. If you are using EOS 30D or 20D cameras: See figure 2-2 to remove the batter
Résumé du contenu de la page N° 7
Attaching Your Power Grip to Your Camera (continued) 3. Insert the detached cover into its storage slot to ensure that it will not be lost. See figure 3. 4. Remove the protective cover, and then insert the electrical contacts of your power grip into the battery compartment of your camera. See figure 4. 5.Align the attachment screw with the camera’s tripod socket, and then turn the attach/detach knob to tighten the power grip securely to your camera. See figure 4. -6-
Résumé du contenu de la page N° 8
Attaching Your Power Grip to Your Camera (continued) NOTE: Be sure to attach the battery grip to your camera before loading the battery magazine into the battery grip. Your camera may not display the correct amount of power provided by your battery grip if you attach the battery grip with the battery magazine already loaded. Before removing your battery grip from your camera, make sure to turn the power switch on your camera to the OFF position, and to also remove the battery magazine.
Résumé du contenu de la page N° 9
Inserting Battery Packs Into Your Power Grip 1. Slide the lever as shown by the arrow in figure 5 and open the cover. See figure 5. 2. Press both release levers outward in the battery compartment and remove the battery magazine. See figure 6. -8-
Résumé du contenu de la page N° 10
Inserting Battery Packs Into Your Power Grip (continued) 3. Check the illustration on the battery compartment cover, and hen insert the batteries all the way in. See figure 7. 4. Close the battery compartment cover until it clicks into place. -9-
Résumé du contenu de la page N° 11
Inserting Battery Packs Into Your Power Grip (continued) NOTE: If only one battery will be used, it may be inserted in either the right or left sides. If two batteries packs are inserted, power is supplied simultaneously by both battery packs. Two battery packs at different charging levels can be used without any complications. -10-
Résumé du contenu de la page N° 12
Inserting AA Batteries 1. Insert your AA batteries into the battery magazine. Make sure the batteries are inserted with the + and – ends in the directions shown on the battery magazine. See figure 8. 2. Turn over the battery magazine so that the inserted batteries are facing downward, and then insert the battery magazine into the battery grip until the release lever locks into place. See figure 9. 3.Close the battery compartment cover until it clicks into place. -11-
Résumé du contenu de la page N° 13
Inserting AA Batteries (continued) NOTE: When AA sized batteries are being used, the continuous shooting speed during AI Servo AF will slow down. Also, fewer images can be shot. Therefore, usage of AA batteries is recommended only for emergencies. Use of AA batteries is also not recom- mended when connecting the camera to a computer. When using disposable AA batteries the camera may not function when using at tempera- tures below 20°C/68°F or for certain battery brands and in some storage
Résumé du contenu de la page N° 14
Inserting the DC Coupler To connect to a household power outlet use the AC adapter kit ACK-E2 (sold separately). 1. Connect the DC coupler to the AC adapter, and then connect the power cord to a power outlet. 2. Load the DC coupler to the left side of the battery compartment, (see figure 10), and pass the cord through the cord mount (see figure 10). 3. Insert the DC coupler all the way in. 4. Check that the cord passes properly through the cord mount and close the cover until it clicks
Résumé du contenu de la page N° 15
Inserting the DC Coupler (continued) NOTE: Do not connect or disconnect the power cord while the camera power switch in the ON position. The DC coupler can also be used with the compact power adapter CA-PS400 and the DC coupler DR-400. Both are sold separately. -14-
Résumé du contenu de la page N° 16
Using the Battery Grip Turn the vertical grip ON/OFF switch to the ON position (see figure 11) in order to make the buttons and dials on your power grip function in the same way as those on your camera. When shooting in the horizontal grip position, turn the vertical grip ON/OFF switch to the OFF position so that you do not accidentally use the buttons or dials on the power grip. CAUTION Remove the power supply from your power grip when your camera will not be used for an extended peri
Résumé du contenu de la page N° 17
Battery Life Temperature: +23°C/0°C, 73°F/32° (Number of shots aproximate) MODEL Power Supply No Flash 50% Flash EOS 40D BP-511A x 2 2200/1900 1600/1400 & AA Alkaline Batteries EOS 50D 400/200 300/100 BP-511A x 2 2200/1800 1400/1200 EOS 30D AA Alkaline Batteries 400/200 300/100 BP-511A x 2 2200/1500 1400/1100 EOS 20D AA Alkaline Batteries 250/0 120/0 *Base
Résumé du contenu de la page N° 18
Specifications Type: Battery grip for the EOS 50D/40D/30D/20D Power Sources: (1) Battery Pack BP-511A/514/511/512 (2) AA size batteries: Alkaline batteries (3) AC adapter kit ACK-E2 (not included) Power Switch: Camera’s power switch Dimensions: 142.7 (w) x 110.5 (H) x 75.7 (D) mm / 5.6(w) x 4.4(H) x 3(D) inches Weight: Approximately 440g/11.5 oz. -17-
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
