Instruction d'utilisation Canon REBEL 400D

Résumé du contenu de la page N° 1

ExpoDisc Custom White Balance Procedures
Canon Cameras


Canon Digital Rebel (300D) and Digital Rebel XT (350D)

1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes or set the correct manual exposure in “M” mode.
3. Aim the camera towards the light illuminating the subject and press the
shutter release button.
4. Push ʻMENUʼ button and select < camera icon > tab.
5. Select ʻCUSTOM WBʼ using

Résumé du contenu de la page N° 2

Canon Digital Rebel XSi (450D) 1. Install the ExpoDisc and set the camera to Manual Focus mode. 2. Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode. 3. Aim the camera towards the light illuminating the subject and press the shutter release button. 4. Push the ʻMENUʼ button. 5. Scroll down to ʻCustom WBʼ in the menu using the thumb dial, then push the ʻSetʼ button in the center of the thumb dial. 6. Select th

Résumé du contenu de la page N° 3

Canon 5D and Canon 5D mk II 1. Install the ExpoDisc and set the camera to Manual Focus mode. 2. Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode. 3. Aim the camera towards the light illuminating the subject and press the shutter release button. 4. Push the ʻMENUʼ button 5. Scroll down to ʻCustom WBʼ in the menu using the thumb dial, then push the ʻSETʼ button in the center of the thumb dial. 6. Push the ʻSet

Résumé du contenu de la page N° 4

Canon 1D Mark II and 1Ds Mark II 1. Install the ExpoDisc and set the camera to Manual Focus mode. 2. Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode. 3. Press and hold the white ʻWBʼ button while turning the thumb dial to select the custom WB icon ( ) in the control panel, then release the ʻWBʼ button. 4. Aim the camera towards the light illuminating the subject and press the shutter release button. 5. Press

Résumé du contenu de la page N° 5

custom WB icon ( ) in the control panel if it is not already selected, then release the ʻWBʼ button. 11. Remove the ExpoDisc, return the camera to Auto Focus if desired, and start shooting. Canon 1D Mark III and 1Ds Mark III 1. Install the ExpoDisc and set the camera to Manual Focus mode. 2. Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode. 3. Push the ʻMENUʼ button and under the ʻShooting1ʼ tab select ʻCus