Résumé du contenu de la page N° 1
SDC - 33
Digital Still Camera
E
User’s Guide
® ®
For Windows 3.1 and Windows 95
Résumé du contenu de la page N° 2
E Features Take pictures instantly ... without loading film. Congratulations on your purchase of Samsung’s state-of-the-art easy-to-use digital camera. You can instantly take a picture, load the picture onto your PC, and output it immediately through your monitor or printer. Samsung Digital Camera Features Large image storage capacity Clean high-quality picture A progressive scanning CCD image The built-in 4MB internal flash memory will hold up to 45 high quality(Standard) sensor with 350 th
Résumé du contenu de la page N° 3
E Contents Getting started Printer 1 Features -Inkjet Precautions 3 -Laser Safety Instructions 5 -Dye Sublimation Location of Controls 7 Make an instant print of a snapshot. Getting Started 9 Send an email card to your friend. Battery insertion 9 Create a photo calendar. Liven up your reports with vivid slide shows. Create an electronic catalog of products. Operation Basic Picture Taking 11 Setting Picture Mode 13 CD-ROM 14 Timer Photography Hard Disk Drive Floppy Disk Deleting Pictures 15 Co
Résumé du contenu de la page N° 4
E Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert. Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la bome correspondante de la prise et pousser jusqú au fond. This symbol is intended to alert the user to the presence of u
Résumé du contenu de la page N° 5
E NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer
Résumé du contenu de la page N° 6
E Safety Instructions 1. READ INSTRUCTlONS : All the safety and operating instructions should be read before the CAMERA is operated. 2. RETAIN lNSTRUCTIONS : The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS : All warnings on the CAMERA and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTlONS : All operating and maintenance instructions should be followed. CLEANING : Do not use liquid or aerosol cleaners. Use a soft lint-free cl
Résumé du contenu de la page N° 7
E 9. SERVICING : Do not attempt to service this CAMERA yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 10. DAMAGE REQUlRING SERVICE: Remove the batteries from this CAMERA and refer servicing to qualified service personnel under the following ccnditions: a. If any liquid has been spilled onto, or objects have fallen into the CAMERA. b. If the CAMERA has been exposed to rain or water. c. If the CAMERA
Résumé du contenu de la page N° 8
E Location of Controls Pictures Remaining Pictures Taken Timer (page 14) Picture Mode (page 13) STD : Total 45 pictures ECO : Total 180 pictures Battery level indicator (pages 9-10) Delete indicator (pages 15-16) Timer lamp (page 14) Operation ready indicator Viewfinder RS-232C port (page 17) DC input jack (page 18) 7
Résumé du contenu de la page N° 9
E Picture Mode button (page 13) Timer button (page 14) Delete button (pages 15-16) Shutter Power switch Battery cover (pages 9-10) Tripod mounting hole 8
Résumé du contenu de la page N° 10
E Getting Started Battery insertion 1 Locate the battery cover on the bottom of the camera and push it open In the direction of the arrow. Thread the thin end of the strap into Handstrap attachment the hole on the side of the camera and loop the large end of the strap around it as shown in the figure. 9
Résumé du contenu de la page N° 11
E 3 2 Insert 4 AA type batteries Close the cover and push with the (+)/(-) polarities as it in the direction of the shown in the compartment. arrow, making sure the lock snaps. With 4 new AA alkaline batteries, you can take more than 200 pictures under normal conditions. Do not mix different types of batteries. Replace all 4 batteries at the same time ; do not mix old and new batteries. 10
Résumé du contenu de la page N° 12
E Basic Picture Taking 1 Turn the camera ON by pushing the power switch in the direction of the arrow. + The display panel and Operation Ready lamp will light. To Turn the Power off Push the power switch in the direction of the arrow again. 11
Résumé du contenu de la page N° 13
E 3 2 Look through the viewfinder Press the shutter. to center your subject. The timer lamp will flash one time. * Make sure the subject is at least The operation ready indicator will 100cm (3.3 feet) away. flash and the display panel will show ‘Pro r i . You can then take the next picture. Auto Shut-off If you do not operate the camera for more than 3 minutes (10 minutes when hooked up to a PC), the camera automatically turns itself off to save battery power. 12
Résumé du contenu de la page N° 14
E Setting Picture Mode You can select the resolution of the picture you are about to take according to your needs. STD Standard Mode Press the Pic Mode button. + The button toggles between ‘STD’ and ‘ECO’. You can switch freely between the 2 settings. + Use this setting for highest quality pictures. - 640 x 480 image resolution - Camera can store up to 45 images. + Use this setting to take a larger quantity of pictures. - 320 x 240 image resolution - Can store up to 180 images. 13 ECO Economy Mo
Résumé du contenu de la page N° 15
E Timer Photography This function allows you to take a picture of yourself or include yourself in a group photo. 2 1 Press the Shutter. Press the Timer button. The timer icon on the display Press the Timer button again to panel and the timer lamp will flash. cancel. The picture will be taken automatically in 10 seconds. + If no operation is performed for 30 sec. after pressing the Timer button, the timer function is automatically canceled. * The timer function cannot be canceled after pressing t
Résumé du contenu de la page N° 16
E Deleting Pictures You can delete the last picture taken or all the pictures from the camera’s memory. To delete one-by-one (starting from last picture taken) 1 2 Keep the Delete button Press the Shutter. + Pictures Remaining will pressed for more than increase by one and Pictures 2 seconds. Taken will decrease by one. + The ‘DEL’ icon will flash. You can press the shutter again to erase more pictures. 15
Résumé du contenu de la page N° 17
E To delete all the pictures at once 2 1 Press the Shutter. Keep the Delete button The Pictures Remaining will pressed for more than 5 return to the initial total and seconds. the Pictures Taken (in box) The ‘ALL DEL’ icon will flash. will be reset to zero. To exit the Delete mode, press the Delete button again. If no operation is performed for 30 seconds after entering the Delete mode, the delete mode will be automatically cancelled. 16
Résumé du contenu de la page N° 18
E Connecting to your PC IBM Compatible PC Connect the PC cable Connect the other end to the back of your PC. of the PC cable to the Connect to the 9-pin serial Serial port on the port (RS-232C) Camera. If your PC only has a 25-pin serial port available, you must use a Female DB25 to Male D89 serial port adaptor. Before making any connections to the PC, turn the camera power off first. 17
Résumé du contenu de la page N° 19
E It is generally not necessary to use an AC adaptor ; however, for your convenience, a DC input jack has been provided. This camera will accept many commercially available AC adaptors. You must purchase the AC adaptor separately. The output of the AC adaptor must be 6V DC and it must be rated at 500mA or higher. The polarity of the AC adaptor output must be The AC adaptor must have the following plug size : - 1.7mm inside diameter end) - 4.0mm outside diameter ( Q end) D ElAJ class 2 standard
Résumé du contenu de la page N° 20
E Software Installation ® - You must have an IBM PC or compatible with Microsoft Windows 3.1 or ® Windows 95 instaIled and running. - Have ready the supplied Twain Driver disk (There are separate disks for ® ® Windows 95 and Windows 3.1). How to install the Twain Driver Insert the disk labeled ‘Twain Driver’ into your floppy disk drive ‘A’ or ‘B’. 1 (Choose the appropriate disk for your operating system) ® For Windows 95 : Click the ‘Start’ button on the Windows Taskbar. 2 ® For Windows 3.1
