Résumé du contenu de la page N° 1
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`1
DAY/NIGHT COLOR CAMERA
E
SCC-B2303(P)/B2003P D
F
SCC-B2307P/B2007P
User’s Manual
Es
I
Résumé du contenu de la page N° 2
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`2 CAUTION This symbol indicates RISK OF ELECTRIC high voltage is present E SHOCK DO NOT OPEN inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you CAUTION: TO REDUCE THE that important literature RISK OF ELECTRIC SHOCK, concerning operation and DO NOT REMOVE REAR maintenance has been COVER. NO USER SERVICEABLE PARTS INSIDE. included with this REFER TO QUALIFIED product. SERVICE PERSONNEL. To preve
Résumé du contenu de la page N° 3
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. E 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not
Résumé du contenu de la page N° 4
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`4 Contents Chapter 1 Introduction ........................................................ 5 E Chapter 2 Special Features ............................................. 6 Chapter 3 Part Names and Functions ............................... 7 Chapter 4 Installation .......................................................... 12 Cautions for Installation and Use .......................13 Connecting Automatic Shutter Lens Connector........... 14 Fixing Lens and
Résumé du contenu de la page N° 5
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`5 Chapter 1 Introduction The DAY/NIGHT Camera operates in a color mode in an the illumination over the standard value and otherwise in B/W mode by deleting the IR Cut function, which contributes to the improvement E of sensitivity so that it is called a low illumination camera which is able to identify objects in a dark area. Meanwhile, it has incorporated a Sense Up function owing to a low speed shutter and a field accumulation method to improve its l
Résumé du contenu de la page N° 6
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`6 Chapter 2 Special Features High Sensitivity It has an up-to-date 1/3" Super(EXview)-HAD IT CCD for an image of high sensitivity. E Low Illumination Function It has both a low illumination function and DAY/NIGHT function based on digital signal technology in order to operate in the worst environment without light. Digital Zoom Function It has a digital zoom function for a 10 time enlargement as a maximum. (If you turn the PIP function to the Digital Z
Résumé du contenu de la page N° 7
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`7 Chapter 3 Part Names and Functions Side View E Mount Adapter Fixing Groove Auto Iris Lens Connector Back Focus Control Bar ALC Lens Selection Switch Automatic Shutter Lens Control Cable Camera Lens Mount Adapter Fixing Groove This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. Camera Lens(Option) This lens is installed in the camera. * A camera lens with a stained surface should be cleaned sof
Résumé du contenu de la page N° 8
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`8 Auto Iris Lens Control Cable This cable transmits the control signal from the camera to control the lens shutter. E Back Focus Control Bar It controls the back focus. ALC Lens Setting Switch This switch sets the Auto Iris lens type for use. DC : When you attach an Auto Iris lens requiring the DC control signal, please put this switch in the DC position. VIDEO : When you attach an Auto Iris lens requiring the video control signal, please put this s
Résumé du contenu de la page N° 9
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`9 Power Display LED When the camera is supplied with power, LED is on. E ➁ Video Output Terminal The monitor video input terminal is connected with this terminal through which the camera video signal comes out. ➂ Remote Input Terminal(RS-232) This terminal is used for camera control at the production plant. 1 2 3 4 1 TXD 2 RXD 3 +5V 4 GND 9
Résumé du contenu de la page N° 10
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`10 ➃ DAY/NIGHT External Signal Input & Alarm Signal Output This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW. The MOTION DET E function generates an alarm signal when a movement is detected. DAY/NIGHT IN GND ➁ ALARM OUT Connect an external sensor to the DAY/NIGHT terminal as shown in then connect any external device such as a buzzer or lamp to the ALARM terminal as shown in ➁ . The ALAR
Résumé du contenu de la page N° 11
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`11 Camera Operation Switch(Setup Switch) The function of the camera operation switch changes depending on whether the camera is currently in the usual operation mode(No setup E menu is seen on the screen) or the setup menu mode. [LEFT/RIGHT] key [UP/DOWN] key [ENTER] key In the usual operation mode [LEFT/RIGHT] key : Press key for about 2 seconds and the menu comes out to control the DC IRIS level. The [LEFT] key raises the level and the [RIGHT] key
Résumé du contenu de la page N° 12
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`12 Chapter 4 Installation This chapter describes what should be checked before installation, how to set the installation environment, and what should be done during installation. Then, it describes how to install the camera and connect the E cable in actual circumstances. Before Installation Checking the contents of the package Be sure to check if the following items are included in the package. Camera Camera Holder(Mount) User's Manual C Mount Adapter
Résumé du contenu de la page N° 13
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`13 What should be done during installation and use E Do not disassemble the camera on your own. ➁ Be careful when handling the camera at all times. Do not strike the camera with your fists or shake it. The camera should be stored and treated with care to avoid any damage. ➂ Do not put or operate the camera in rain or wet places. ➃ Do not scrub the camera body with rough sandpaper when it is stained. Please use a dry cloth at all times. Put the came
Résumé du contenu de la page N° 14
00424A SCC-B2307P-eng 4/7/05 9:11 PM ˘`14 Connecting Auto Iris Lens Connector Prepare the Auto Iris lens connector, a camera auxiliary, as follows : E Connect each uncovered shutter control cable wire to the Auto Iris lens connector as follows. Pin No. DC Control Type VIDEO Control Type 1 Damp(-) Power (+12V) 2 Damp(+) N/A 3 Drive(+) VIDEO Signal 4 Drive(-) GROUND 14
Résumé du contenu de la page N° 15
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`15 Installation E Lens Fixing In case of CS lenses Turn the CS lens clockwise until it is fixed as shown as follows. CS lens In case of C lenses Turn the C-mount adapter clockwise to fix it. Then turn the C lens clockwise until it is fixed as follows. C lens 15
Résumé du contenu de la page N° 16
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`16 Setting Switch Control You should change the position of the lens setting switch on the side of the E camera according to the lens type. Depending on whether you fixed the DC control type Auto Iris lens or video control type automatic shutter lens, you should put the switch in "DC" or "VIDEO" position respectively. Back Focus Adjustment The camera back focus is adjusted at the plant before delivery, but some lenses are out of focus though the number di
Résumé du contenu de la page N° 17
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`17 Lenses with zoom function Image an object with high resolution(letticed) at a distance of 3 to 5 m and zoom in the lens as close to TELE as possible. Then adjust the lens E focus bar until the object is seen best. ➁ Zoom in the lens as close to WIDE as possible and adjust the BACK FOCUS adjustment bar until the object is seen best. ➂ Repeat from to ➁ above 2 or 3 times until the focus on the ZOOM TELE side is in line with that on the ZOOM WIDE side
Résumé du contenu de la page N° 18
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`18 Connecting Cables and Checking Operation 1 First, connect the connector of the BNC cable to the Video Out terminal E 2 Second, connect the other connector of the BNC cable to the Video In terminal. Video In Terminal of Monitor Rear Surface BNC cable Video Out Terminal 3 Then, connect the power adapter. Connect a part of the power adapter composed of 2 lines to the Camera Power In terminal with a flat-head driver as follows.(GND : marked with a white
Résumé du contenu de la page N° 19
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`19 E 19
Résumé du contenu de la page N° 20
00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘`20 Chapter 5 Camera Set-Up This chapter describes how to set up the camera. The first part describes the whole set up menu and composition and the second part describes the function of each menu. E ON... CAMERA ID CAMERA ID AND LOCATION SETUP ON.../OFF ALC... DC IRIS SETUP IRIS ALC.../ELC... LEVEL SETUP BLC ELC... OFF/BOTTOM.../ AREA SETUP TOP.../LEFT.../ USER... RIGHT.../ GAIN, AGC COLOR COLOR... CENTER.../USER.. SETUP COLOR/BW BURST SETUP COLOR.../B
