Résumé du contenu de la page N° 1
AR-651/AR-810
MODEL
AR-651
AR-810
DIGITAL COPYING MACHINE
OPERATION MANUAL
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135.
www.sharp-usa.com
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East, Mississauga, Ontario, L4Z 1W9
SHARP CORPORATION
PRINTED IN JAPAN
XXXXXXXXXXXX
AR-651/AR-810 DIGITAL COPYING MACHINE
Résumé du contenu de la page N° 2
➢ ❧ ❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧ The power switch positions are marked “ ” to indicate power “ON” and “ ” to indicate stand-by. In the stand-by position, power is being supplied to a drying heater within NOTICE the optical system of the copier. BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WAR- Caution: RANTY THAT YOUR SELLING DEALER EXTENDS TO YOU. In order to assure For complete electrical disconnection, pull out the main plug. you, the end-user, of warranty protect
Résumé du contenu de la page N° 3
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera
Résumé du contenu de la page N° 4
EPA ENERGY STAR ® (MFD) The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the ENERGY STAR Program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution. As an ENERGY STAR Partner, the SHARP Corp. has determined that this copier model meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR guidelines for this class of copier require ENERGY
Résumé du contenu de la page N° 5
PREFACE Thank you for purchasing the Sharp Digital Copier AR-651/810. This Operator’s Manual describes the following: 1 how to use the digital copier how to inspect and carry out maintenance on the digital copier how to remedy mechanical and copying problems 2 Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that clean copies are made at all times and to keep your digital copier in optimum working order, this Operator’s Manual should be re
Résumé du contenu de la page N° 6
PREFACE (Cont.) Features of the AR-651/810 The AR-651/810 is a digital copier which is high-speed, compact and high-durability. The AR-651/810 can read the image in the memory temporarily after scanning, so you can operate sorting/grouping, etc. as well 1 as processing/editing quietly, quickly and easily. And the combination of various finishing function such as thick paper and tab paper, etc. makes finishing easier as you request. The AR-651/810 also has the following convenient features, fu
Résumé du contenu de la page N° 7
TABLE OF CONTENTS Preface ................................................................................................................................................ 1 1 Features of the AR-651/810 ................................................................................................................ 2 Table of contents ................................................................................................................................. 3 Disclaimer notice ...............
Résumé du contenu de la page N° 8
TABLE OF CONTENTS (Cont.) 4.Using the editing functions .......................................................................................................... 4-1 1 1. Image shift ................................................................................................................................... 4-2 2. Edge erase .................................................................................................................................. 4-4 3. Dual-page ..................
Résumé du contenu de la page N° 9
7.When the graphic symbols flash on the touch panel ................................................................ 7-1 1 1. Description of the flashing graphic symbols ................................................................................ 7-2 2. Add paper symbol ....................................................................................................................... 7-3 - Adding paper to the drawers .......................................................................
Résumé du contenu de la page N° 10
DISCLAIMER NOTICE The following notice sets out the exclusions and limitations of liability of SHARP Corp. (including its employees, agents and sub-contractors) to any purchaser or user ("User") of the AR-651/810, including its accessories, 1 options and bundled software ("Product") 1. The exclusions and limitations of liability referred to in this notice shall be effective to the fullest extent permissible at law. For the avoidance of doubt, nothing in this notice shall be taken to exclude or
Résumé du contenu de la page N° 11
PRECAUTIONS 1. Installation The AR-651/810 should be installed by a qualified service technician. 1 Note: The packing material should be disposed of properly. 1 To obtain the best possible results, this copier should be used in conjunction with a 2 dedicated AC power line with the following ratings. 115V— 60Hz,20A 2 Notes: 1. The use of other appliances or other equipment on the same line as this copier may adversely affect performance and copy quality. 3 2. Be sure to use a 3-conductor, grounde
Résumé du contenu de la page N° 12
PRECAUTIONS (Cont.) 2. General Precautions Handle and use the copier gently and carefully. Do not place anything on the paper drawers or the original feeding tray. 1 1 Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur. Do not allow any metal items such as paper clips to fall into the copier. 2 Be sure to turn OFF the power switch (unless using the weekly timer mode): When you leave your office at night.
Résumé du contenu de la page N° 13
1 Explanatory Label 2 Identification Label >PS< CLASS 1 LASER PRODUCT APPAREIL A LASER DE CLASSE 1 LASER KLASSE 1 PRODUCTO DE LASER DE CLASE 1 3 Certification Label 4 5 6 Warning Label >PS< 7 8 9 10 11 12 Warning for high temperature areas 9
Résumé du contenu de la page N° 14
PRECAUTIONS (Cont.) 2. General Precautions (Cont.) Fixing the adjusters (stoppers) 1 There are four adjusters (stoppers) located in front and rear bottom (two adjusters each) of the copier. After moving/ installing the copier, be sure to turn the adjusters clockwise to fix them firmly on the ground. 2 *To unlock the adjusters when moving the copier, turn them counterclockwise. If the copier is not steady, it may fall over and result in personal injury. 3 To lock 4 To unlock 5 6 7 8 9 10 11
Résumé du contenu de la page N° 15
1 1. BEFORE MAKING COPIES 2 1. Description of the digital copier and the optional equipment ........... 1-2 - Main components ..........................................................................................1-2 3 - Optional equipment ....................................................................................... 1-3 - Control panel ................................................................................................. 1-4 4 - Touch panel ...............................
Résumé du contenu de la page N° 16
1. DESCRIPTION OF THE DIGITAL COPIER AND THE OPTIONAL EQUIPMENT Main Components 1 Original scales Original glass 2 Control panel Bypass cover 3 Bypass guide Drawers Feed side cover 4 Paper size indicator 5 Tandem LCF (Large Capacity Feeder) 6 Reversing automatic document feeder Operator’s manual pocket Touch Panel Contrast Adjustment Volume (Back side) (back side of the control panel) 7 * When adjusting the contrast of the touch panel, Power switch pull the toner cartridge holder out, and tu
Résumé du contenu de la page N° 17
Optional Equipment Finisher 1 Enables the use of sort, group and staple modes, plus the hole punch (available when the optional hole punch unit is installed) and saddle stitch modes (AR-F12 only). Hole punch unit Makes punching holes on copies for binding in netebooks. 2 Inserter Enable the use of special types of paper and printed paper in addition to the staple sorting or the hole punch mode (Available when the optional staple sorting and the hole punch mode units are installed.) This paper is
Résumé du contenu de la page N° 18
1. DESCRIPTION OF THE DIGITAL COPIER AND THE OPTIONAL EQUIPMENT (Cont.) Control Panel Total Counter Shows the total of copied paper since the set up of the copier. 1 HELP key When this key is pressed, the appropriate operation procedures are displayed. PRINTER/NETWORK key 2 Press this key to switch between the printer and the network (optional) functions. COPY key Press this key to select the copy functions. 3 JOB STATUS key Press this key to monitor the statuses of 1) Job list, 2) De
Résumé du contenu de la page N° 19
CLEAR ALL key 1 When this key is pressed, all selected copy modes are cleared to default settings. Page 2-2 * Automatic CLEAR ALL Right bottom of this page STOP key Use this key to stop an ongoing scan and copy operation. Page 2-15 2 START key Press this key to start copying. INTERRUPT key 3 While copying is already in progress, press this key when you want to make copies of different origi- nals. Pressing the key again will return you to the previous copy job. ENERGY SAVER key When
Résumé du contenu de la page N° 20
1. DESCRIPTION OF THE DIGITAL COPIER AND THE OPTIONAL EQUIPMENT (Cont.) Touch Panel When the power is turned on, and ‘READY’ is displayed, the following basic screen is shown on the touch panel. On the screen, currently set functions, selected functions and the copier status are shown using messages 1 and illustrations. * The contents of the touch panel screens on this manual show a copier equipped with full-options. 2 Reproduction ratio Total copy quantity Currently selected drawer size Remain
