Résumé du contenu de la page N° 1
Installation Guide & Warranty
TM
Model Number | H20J55DT HealthView TV
Table of Contents see page
5
Master TV Setup see page
7
Zenith and the lightning Z logo are registered
trademarks of Zenith Electronics Corporation
© Copyright 2007, LG Electronics U.S.A., Inc.
Résumé du contenu de la page N° 2
RECORD THE H20J55DT SERIALNUMBER TM For Customer Support/Service, please call: The serial number of the HealthView TV is located on the back of the cabinet. For future reference, we suggest that you record the number here: 1-888-865-3026 Serial No.____________________________ www.lgcommercial.com • www.zenith.com WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Read these instructions. stoves, or other apparatus (including • Keep these instructions. amplifiers) that produce heat. • Heed all warnings. • Follow all instructions. 5. Do not defeat the safety purpose of the polarized or grounding-type plug. Installation Guide & Warranty A polarized plug has two blades with Model Number | H20J54DT HealthView TV one wider than the other. A grounding-type plug has two blades and a third grounding prong. Th
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS 8. Use only with the cart, stand, tri- or branch circuits. Check the speci- pod, bracket, or table specified by fication page of this owner's manual the manufacturer, or sold with the to be certain. apparatus. When a cart is used, use caution when moving the cart / Do not overload wall outlets. apparatus combination to avoid Overloaded wall outlets, loose or injury from tip-over. damaged wall outlets, extension cords, frayed power cords, or dam- aged or cracked wire
Résumé du contenu de la page N° 5
Table of Contents Use this page as a reference for finding the pages or sections to go to and set up the TV’s features for the end user See the Master TV Setup on page 7 This TV functions differently than previous Zenith hospital sets. A Master TV setup must be created and then transferred to the internal TV controller with 2-5-5+Menu. This action will transfer all digital informa- tion and add important analog information to the TV controller. Safety Warnings . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
TV Features Overview A brief overview of the features on this TV Analog/Digital Tuner This TV is equipped with an analog/digital tuner. This tuner is used for standard over-the-air antenna, cable type (CATV) and is capable of receiving over-the-air and cable type (CADTV) digital programming. After running Auto Program on the TV, analog channels will appear numerically with Channel Up/Down and Digital Channels will appear numerically in the channel scan after either the highest/lowest analog c
Résumé du contenu de la page N° 7
H20J55DT Master TV Setup A Master TV must be created and then transferred to the internal TV controller with 2-5-5+Menu, this action adds to the TV controller important analog setup informa- tion and all digital information. (Please refer to the sections mentioned below for more detailed instructions). Note: This TV is capable of storing in memory up to 140 digital broadcast and 125 analog channels. Overview: Master TV Setup Procedure Following are the steps necessary for setting up a Master TV
Résumé du contenu de la page N° 8
AUDIO IN PILLOW SPEAKER Hook Up an Off Air Antenna Connect an over the air signal source to the TV Over-the-Air Antenna Locate the Antenna/Cable jack on the back of the TV. 1 Connect the RF antenna wire that run from the wall 2 directly to the jack, according to the connection dia- gram shown to the right. If you have a 75 ohm RF cable, then you donÌt need any adapters! A 300 to 75 ohm adapter is not included with the Zenith TV. Antenna Antenna Cable TV SPEAKER M.P.I. VIDEO IN SPEAKER OUT RF C
Résumé du contenu de la page N° 9
AUDIO IN AUDIO IN PILLOW SPEAKER PILLOW SPEAKER Hook Up Cable Service (CATV) Connect cable service to the TV Cable Service Locate the RF jack on the back 1 of the TV set. Cable TV Connect the CATV cable that runs Wall Jack 2 from the wall to the Antenna/Cable RF jack as shown to the right. Antenna Cable TV SPEAKER RF Coaxial Wire (75ohm) M.P.I. VIDEO IN SPEAKER OUT Cable Service with a Cable Box Locate the Antenna/Cable in jack Cable TV 1 Wall Jack on the back of the TV set. Connect the CATV ca
Résumé du contenu de la page N° 10
AUDIO IN PILLOW SPEAKER Hook Up an Off Air Antenna with VCR Connect an over-the-air signal source to the VCR and TV Over-the-Air Antenna with VCR Locate the Antenna/Cable In jack on the 1 back of the VCR. Connect the antenna that runs from the wall 2 jack directly to this jack, according to the connection diagram shown to the right. Make the VCR to TV connections as indicated 3 Antenna in the illustration. VCR Back If you have a 75 ohm RF cable, then you don’t need any adapters! VCR Back AV Pane
Résumé du contenu de la page N° 11
AUDIO IN PILLOW SPEAKER Hook Up a Cable Box with VCR Connect a cable box and VCR to the TV Cable TV Cable Service with VCR Wall Jack Locate the In jacks on the cable box and the 1 VCR. Connect a 75 ohm cable between the cable box 2 wall jack and Cable In on the cable box. Connect a 75 ohm cable from the Cable out jack 3 on the cable box to the Ant In jack on the VCR. Cable Box Connect a 75 ohm cable between the VCR out In 4 jack on the VCR and the Antenna/Cable In jack Out Output on the TV. Swit
Résumé du contenu de la page N° 12
AUDIO IN PILLOW SPEAKER Hook Up Audio/Composite Video Connect the TV to an audio/composite video source Audio/Composite Video Locate the audio/composite video input jacks on the TV. 1 Connect the audio/composite video input jacks to an audio/composite 2 video device as shown in the illustration. Composite Audio/Video Device Antenna Left Cable TV SPEAKER Audio/Video Cables Audio Out not included with TV M.P.I. VIDEO IN SPEAKER OUT Right Video Out 206-4065 Page 12 Typical TV Back
Résumé du contenu de la page N° 13
AUDIO IN PILLOW SPEAKER Hook Up an External Speaker Connect the TV to an external speaker or amplifier External Speaker Locate the Matrix Out jack on the back of the TV. 1 Connect the Matrix Out jack to an external speaker or 2 audio amplifier as indicated in the illustration. Speaker Back Audio In Antenna Cable TV SPEAKER Audio cable not included M.P.I. VIDEO IN SPEAKER OUT with TV 206-4065 Page 13 Typical TV Back
Résumé du contenu de la page N° 14
Pillow Speaker Connection & Setup Pillow speaker is not included with the HealthView TV Pillow Speaker Setup Locate the Pillow Speaker output jack on the back of 1 the HealthView TV. Connect an accessory pillow speaker or wired remote 2 control unit to this 6-pin jack. Connect the pillow speaker as shown in the illustration. 3 TV Back Set the Pillow Speaker switch to Pillow Speaker setting. 4 Note: Once the switch is set to Pillow Speaker, no audio will be heard from the TV speakers. Use a pillo
Résumé du contenu de la page N° 15
Pillow Speaker Setup Connect a pillow speaker to the TV Pillow Speaker Control Pillow Speaker Interface This connector furnishes three control lines and an audio output. A patient-pendant remote control, or entertainment audio and nurse call system may be connected here. All lines are isolated from the AC power line and earth ground. (Opto-isolators isolate the control lines, and a transformer isolates the audio. There are no relays or inductive components in the control lines.) Pin No. Purpose
Résumé du contenu de la page N° 16
Optional Installer/User Remote Control Keys descriptions and functions for the optional remote MUTE POWER Turns sound Off and On, Turns TV On or Off. while the picture remains. GUIDE CHANNEL PREVIEW* Not functional. Allows Parental Control MUTE POWER INFO access on analog channels: Not functional. CH set V-Chip blocks for ana- BANK PREVIEW GUIDE log/digital programming. CC (Closed Captions) Press to turn closed cap- BANK INFO CC tions On/Off. Press ENTER SAP Selects channel banks to exit menu. I
Résumé du contenu de la page N° 17
Front Panel Controls Using the front panel controls to operate the TV Power 1 Turns TV on and off. Channel (Down/Up) 2 Chooses next available channel. Volume (Down/Up) 3 Decreases/increases sound level. CC (Captions/Text) 4 Turns selected caption/text option On and Off. (Depending on TV captions setup.) power 5 channel 6 volume 7 captions 8 Plug TV into AC Power Outlet Install Batteries into Remote Control After all con- Remove the back of nections have the remote control + AA - been made, and
Résumé du contenu de la page N° 18
On-Screen Menus/Displays Overview Descriptions of the menus and on-screen status displays Using MENU and the other keys indicated on the optional Installer’s remote, the installer can access the menus/displays described below. On-Screen Menus Setup Menu Adjusts the basic characteristics of the TV. Auto Program 20 Automatically finds and stores active channels to scroll through using Channel Up/Down. Add/Del/Blnk 21 Manually pick and choose which active channels will appear when
Résumé du contenu de la page N° 19
Other Menus and On-Screen Displays Press the remote keys indicated below to access these menus and displays CHANNEL PREVIEW Ch 25 - PBS 7:15 PM 5 - - - - MONO 9 - - - - 20 - - - - 32 - - - - AUX - - - - VOLUME 2 - - - - XDS Information As Available CH TO SELECT, ENTER TO QUIT LENGTH 00:32 TIME LEFT 00:42 CC FOR PARENTAL CONTROL Channel/Time/Audio Display Ch Preview Menu Volume Display Press ENTER. Shows selected Press CH PREVIEW*. Shows list Press VOLUME
Résumé du contenu de la page N° 20
Auto Program (Channel Search) SETUP MENU Using the optional Installer’s TO PROGRAM 1 AUTO PROGRAM ADD/DEL/BLNK remote control, press POWER to CH. LABELS turn the TV on. CLOCK SET TIMER CAPTIONS Press MENU repeatedly until the AUDIO LANG. 2 LANGUAGE Setup menu appears. Use Up or Down ADJ on the 3 remote control to highlight Auto MUTE POWER Program on the menu. 1 CH BANK PREVIEW GUIDE Press the Right or Left ADJ arrow 4 to go to the Autoprogram Menu. SAP INFO CC Using Up or Down ADJ, choose either
