Résumé du contenu de la page N° 1
Specifications
TV RF systems
Contents
B, G, I, D, K, K1, M
Safety precautions 2
COLOUR TELEVISION
Colour systems
Preparation 3
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
...
1 Confirm which remote control you have 3
Channel and frequencies
INSTRUCTIONS ...
2 Insert the batteries into the remote control 3
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
..................
3 Connecting the aerial and VCR 4
Thank you for buying this JVC
Receives cable channels in mid band, super band and
Résumé du contenu de la page N° 2
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where 15 cm good ventilation is unattainable. When installing this TV, leave spaces for ventilation ar
Résumé du contenu de la page N° 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the three remote controls shown below. Functions you can operate differ depending on the type of remote control. LS series LX series LXB series POWER POWER POWER DISPLAY DISPLAY DISPLAY MENU MENU MENU SUPER BASS CHANNEL VOLUME CHANNEL VOLUME CHANNEL VOLUME SYSTEM SYSTEM SYSTEM COLOUR SOUND MUTING COLOUR SOUND MUTING COLOUR SOUND MUTING TV/VIDEO TV/VIDEO TV/VIDEO 123 123 123 I/II 456 456 456 PICTURE MODE PICTUR
Résumé du contenu de la page N° 4
Preparation 3 Connecting the aerial and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. • Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. • If your TV has an S-connector, you can connect an S-VIDEO compatible device (such as an S- VHS VC
Résumé du contenu de la page N° 5
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component video signals. Also
Résumé du contenu de la page N° 6
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the POWER lamp Main power button language setting mode. POWER DISPLAY DISPLAY button MENU t MENU MENU 3 buttons MENU m AUTO CH PRESET
Résumé du contenu de la page N° 7
Basic operation • The illustration below is for the remote control 1 Press the POWER button to turn RM-C352 supplied with LS series models. Your your TV on. remote control may not look exactly like the • If your TV does not turn on, press the Main illustrations. power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; POWER DISPLAY - the CHANNEL m button - the Number buttons - the TV/VIDEO button MENU 2 Select a channel.
Résumé du contenu de la page N° 8
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour system contrast according to the brightness of your to another colour system. room. This function reduces eye strain and Press this button to select the colour the power consumption of this TV. system. Press this button to select the desired mode. AUTO PAL SECAM NTSC4
Résumé du contenu de la page N° 9
Remote control buttons and functions button MUTING button < LS series only > You can turn the sound off instantly. Press this button. You can select a sound setting for stereo To turn the sound on, press this button broadcast programmes and bilingual again. programmes. Press this button to select a sound setting. DISPLAY button : Stereo sound You can continuously display the current : Bilingual I (sub I) sound channel number or VIDEO mode on the screen. : Bilingual II (sub II) sound Press this
Résumé du contenu de la page N° 10
Remote control buttons and functions RETURN + button CHANNEL SCAN button You can set a channel you frequently view You can quickly view all TV channels to the Return Channel and you can view programmes that you can view on your TV, that channel at any time with one-touch. and search for the programme you want to view. To set the channel to the Return Channel: 1 Press this button to start scanning TV channels. 1 Select the channel you want to set The TV channel programmes are each to the Return C
Résumé du contenu de la page N° 11
Viewing teletext programmes < LS series only > Using the List Mode You can store the numbers of your favourite teletext pages in the List mode and call them I/II 456 up quickly using the coloured buttons. PICTURE MODE 78 9 To store the page numbers: CHANNEL SCAN RETURN 0 -/-- 1 Press the MODE button to engage TV/TEXT ECO SENSOR OFF TIMER TV/TEXT the List mode. Coloured TEXT buttons The stored page numbers are displayed REVEAL HOLD INDEX STORE at the bottom of the screen. REVEAL STORE HOLD
Résumé du contenu de la page N° 12
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. In the List mode: Each time you press the REVEAL button, Returns to the page number displayed in text is hidden or revealed. the lower left area of the screen. HOLD SUBPAGE You can hold a teletext page on the screen Some teletext pages include sub-pages that for as long as you want, even
Résumé du contenu de la page N° 13
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU M buttons to change function settings. POWER Example: DISPLAY DISPLAY Changes the AUTO button SHUTOFF setting. MENU t MENU buttons MENU 2 MENU 2 MENU m AUTO SHUTOFF OFF AUTO SHUTOFF ON buttons CHILD LOCK OFF CHILD LOCK OFF BLUE BACK
Résumé du contenu de la page N° 14
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1” menu, then select “VNR”. “INPUT”. MENU 1 INPUT TV MENU 1 VNR ON INPUT TV COMPRESS(16:9) ON VNR ON PICTURE TILT 00 COMPRESS(16:9) ON PICTURE TILT
Résumé du contenu de la page N° 15
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals You can mute the sound and change the are received for about 15 minutes or longer picture into a blue screen while no signals after the end of a broadcast. are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO 1 Press MENU T to display the SHUTOFF”. “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON
Résumé du contenu de la page N° 16
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to You can adjust the picture as you like. the video signal input from the external 1 Press MENU T to display the device connected to the VIDEO-2 terminal. “MENU 4” menu. If this setting is incorrect, images will not be displayed. MENU 4 TINT COLOUR 1 Press MENU T to display the BRIGHT CONT. “MENU 2” menu, then select SHARP “VIDEO-2 SET”. SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Résumé du contenu de la page N° 17
Using the TV’s menus • The AI VOLUME function may not operate as MONO SURROUND expected if the sound input level from a broad- < LX series and LXB series only> cast station (or video software) is extremely low. •The AI VOLUME function for TV mode and You can enjoy normal monaural sound more VIDEO mode can be set separately. For example, by converting it into a stereo-like sound. you can set it to be off in TV mode and on in VIDEO mode. If you set the AI VOLUME func- 1 Press MENU T to display the
Résumé du contenu de la page N° 18
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV If the picture is not clear: channels to desired channels. Fine-tune the TV channel. 1 Press MENU T to display the 1 Press MENU t to select “FINE”. “MENU 3” menu, then select MANUAL “MANUAL CH PRESET”. FINE SKIP NO SOUND SYSTEM B/G MENU 3 EXIT AUTO CH PRESET MANUAL CH PRESET SELECT BY PR 1 VL LANGUAGE ENGLISH PROGRAM BY -+ EXIT BY FINE BY VO
Résumé du contenu de la page N° 19
Using the TV’s menus SKIP LANGUAGE You can set undesired channels to be You can select the language for the on-screen skipped. Channels set to be skipped cannot display. be selected by the CHANNEL m buttons 1 Press MENU T to display the nor the CHANNEL SCAN button. “MENU 3” menu, then select • Channels to which TV channels have not been “LANGUAGE”. preset are automatically set to be skipped. 1 Press MENU T to display the MENU 3 “MENU 3” menu, then select AUTO CH PRESET
Résumé du contenu de la page N° 20
Attaching the Twin Port Bass Blaster Unit The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster Unit correctly on the TV. Note: • The SUPER BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS functions, see page 9. CAUTION: • The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw
