Résumé du contenu de la page N° 1
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
AV-21M535
Remote control buttons and basic functions .............................. 4
AV-21M515
TV buttons and functions ........................................................... 6
AV-21M315
Setting up your TV ..................................................................... 7
Basic setting for picture................................
Résumé du contenu de la page N° 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 7 If you are not going to use this TV for a long period of time, be sure to EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. disconnect the AC plug from the AC socket. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE 8 The apparatus shall not be exposed to dripping or splashing and that FOLLOWING RULES
Résumé du contenu de la page N° 3
Knowing your TV’s features Main features DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. A2/NICAM You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 EXIT (STEREO / I II) or NICAM Sound-multiplex system. FAVORITE CH (Channel) You can register up to four favorite channels for quick re
Résumé du contenu de la page N° 4
Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 1 2 MENU/OK Display menu and confirm selected function. " 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 8 6 EXIT 5 VOLUME -/+ Adjust the volume level. 3 6 TV/VIDEO Select TV or video terminal input. 2 7 EXIT On the other hand, you can use this button to EXIT from the menu. 7 MUTING Turn off the volume. Press this button again to resume the v
Résumé du contenu de la page N° 5
Remote control buttons and basic functions (continued) Top menu 2nd menu Location 3rd menu Location How to operate menus and menus locations MENU PICTURE PICTURE MODE P.9 – – To Operation Note PICTURE SETTING P.10 CONTRAST P.10 Display the MENU Press the MENU/OK button 2. To exit the MENU, BRIGHT P.10 press the DISPLAY/ SHARP P.10 BACK button 8 or COLOUR P.10 choose EXIT menu TINT P.10 or TV/VIDEO/EXIT WHITE BALANCE P.10 – – button 6. VNR P.15 – – Display the top Press 5/∞ buttons 3 to choose a
Résumé du contenu de la page N° 6
V V E 3 V E 3 CH L / MONO R IN ( ID O- ) L / MONO R VOLUME IN (VID O- ) ANNEL TV buttons and functions The illustrations shown below is for AV-21M535 and AV-21V315 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. No. Button/terminal Description Page 1 L (main power) Press to turn on or turn off the TV’s main power. – Front of the TV 2 POWER lamp Indicate the TV is being turned on or off. – AV-21M535 No colour : TV’s main power is being turned
Résumé du contenu de la page N° 7
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. (1) VHF/UHF outdoor aerial Matching aerial adapter (supplied) (2) (3) 75-ohm coaxial cable (not supplied) 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the - end first. If you connect a VCR, connect the aerial output jack of your VCR CAUTION: and the ae
Résumé du contenu de la page N° 8
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE AUTO PROGRAM EDIT AUTO PROGRAM ENGLISH PR CH/CC AV ¿“…“‰∑¬ CC 12 1 CH 04 22% SETUP TOUR RESTART? 2 CH 76 3 CH 78 4 CH 05 5 CH 28 3 MENU : OK MENU : OK 6 CH 10 DISPLAY : BACK TV/VIDEO : EXIT MENU : OK INSERT
Résumé du contenu de la page N° 9
Basic setting for picture For the colour system in each country or region, see the table below: COLOUR SYSTEM Area Country or Region System You can select the appropriate colour system when the picture is Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. PAL not clear or no colour appears. Indonesia, Malaysia, Singapore, Thailand, India, etc. Press the COLOUR SYSTEM button to select a setting. Asia, Middle China, Vietnam, etc. PAL In TV mode: East Hong Kong, etc. PAL Islamic Republ
Résumé du contenu de la page N° 10
Basic setting for picture (continued) PICTURE SETTING WHITE BALANCE You can adjust the desired picture setting when selecting USER You can change the white balance of the picture to better match in PICTURE MODE. the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ the desired setting. PICTURE menu MENU PICTURE MODE ❇ USER MENU PICTURE menu WHITE BALANCE 2 Select the PICTURE SETTING in PICTURE menu, then
Résumé du contenu de la page N° 11
Advanced setting for picture AI ECO SENSOR (ECO) BLUE BACK You can adjust TV screen contrast according to the brightness of You can set the TV to automatically change to a blue screen and your room. mute the sound if the signal is weak or absent, or when there is Press the ECO button to select the desired mode. no input from an antenna. OFF Cancel the function. Select the BLUE BACK in the INSTALL menu, then choose ON or MODE-1 Mild contrast (recommended). OFF. MODE-2 Even contrast. ❇ MENU INSTAL
Résumé du contenu de la page N° 12
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal You can choose the desired sound setting. sound occurs even when the picture appears normally. Select the SOUND MODE in SOUND menu, then choose the Press the SOUND SYSTEM button to select a setting. setting. ❇ MENU SOUND menu SOUND MODE ** * B/G I D/K M USER You can change this sound setting as you like. Select USER and adjust the frequencies in EQUALIZER * The sound system
Résumé du contenu de la page N° 13
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. You can adjust the sound level of each frequencies when selecting Press the CINEMA SURROUND button to select a setting. USER mode in SOUND MODE. OFF Cancel the function. 1 Select the USER in SOUND MODE under SOUND menu. ON Listen to sound with wider audience effect. ❇ MENU SOUND menu SOUND MODE USER This function is not available when the SOUND MODE is set to 2 Select the EQUALIZER in SOUND m
Résumé du contenu de la page N° 14
DVD function AUTO SIGNAL DETECT WHITE BALANCE You can change the white balance of the DVD picture. When the DVD input signal is detected. The input mode will be Select the WHITE BALANCE in DVD MENU under FEATURES menu, changed to VIDEO-2 automatically. then choose the desired setting. For The DVD player, press the “POWER ON” button of the ❇ FEATURES menu DVD MENU MENU machine so that the signal can be detected. WHITE BALANCE For the VCR, press the “POWER ON” button of the machine, and then press
Résumé du contenu de la page N° 15
Customized setting OFF TIMER VNR You can set the TV to turn off automatically to standby mode after You can reduce the picture noise. a set time. Select the VNR in the PICTURE menu, then choose a setting of Press the OFF TIMER button to select a desired period of time. VNR function. OFF TIMER ❇ MENU PICTURE menu VNR 0 120 You can set the period of time OFF VNR is turned off. 20 to a maximum of 120 minutes AUTO Effect of VNR is automatically controlled. in 10 minutes step. MIN Effect of VNR becom
Résumé du contenu de la page N° 16
Customized setting (continued) DISPLAY VIDEO-2 SETTING You can display the programme number, video terminal number You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 and PR list on the screen. terminal. Press the DISPLAY button to select the desired mode: Select the VIDEO-2 SETTING in INSTALL menu, then choose a ON OFF PR LIST setting (Factory setting is COMPONENT). ❇ Choose a TV channel or a VIDEO terminal. ME
Résumé du contenu de la page N° 17
TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. To register the TV channels automatically EDIT menu appears. (AUTO PROGRAM) EDIT You can register the TV channels into the TV’s channel list PR CH/CC automatically. AV 1 CH 04 2 CH 76 1 Display the INSTALL menu. 3 CH 78 4 CH 05 ❇ MENU INSTALL menu 5 CH 28 3 6 CH 10 2 Choose AUTO PROGRAM, then press the MENU/OK button. MENU : OK I
Résumé du contenu de la page N° 18
TV channel presetting (continued) To edit the channel list (PR LIST) To add in the new channel (MOVE and DELETE in the EDIT menu) (INSERT in the EDIT menu) You can edit the TV channel list as you like. You can add in the new channel in the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be You need to find the “CH/CC” number for the TV channel. Find the changed. “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “
Résumé du contenu de la page N° 19
TV channel presetting (continued) CH US CCIR OIRT AUSTRALIA CC US CCIR OIRT AUSTRALIA CH/CC number CH 33 US-33, W+48 E33 AU-34 CC 18 E S-18 CH 34 US-34, W+49 E34 AU-35 CC 19 F S-19 When you want to use the INSERT CH 35 US-35, W+50 E35 AU-36 CC 20 G S-20 CH 36 US-36, W+51 E36 AU-37 CC 21 H S-21 function on page 18, find the CH/CC CH 37 US-37, W+52 E37 AU-38 CC 22 I S-22 CH 38 US-38, W+53 E38 AU-39/AU-40 CC 23 J S-23 number corresponding to the channel CH 39 US-39, W+54 E39 AU-41 CC 24 K S-24 CH 4
Résumé du contenu de la page N° 20
V L / M N R IN (VIDEO-3) V L / MONO R IN (VIDEO-3) O O Additional preparation The illustrations shown in this section are for AV-21M535 and Connecting to rear component/video input AV-21V315 only, which are used for explanation purpose. Your TV terminal and output terminal may not look exactly the same as illustrated. Rear of TV AV-21V315 Before connecting VCR (for playing) COMPONENT • Read the manuals provided with the devices for the proper VIDEO-1 (VIDEO-2) OUTPUT DVD player (composite sign
