Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
Color Television
yyy yyy
yyy yyy
DTQ 25S2FCV
DTQ 27S2FCV
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equil
Résumé du contenu de la page N° 3
Daewoo Electronics Corporation of America 120 Chubb Avenue, Lyndhurst, NJ 07071 1-800-DAEWOO8 (1-800-323-9668) Fax:201-935-5284 Dear Customer : Daewoo Electronics Corporation of America would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent perfor- mance for many years to come. We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it delivers just as quickly as possible, but we ask
Résumé du contenu de la page N° 4
CONTENTS Table of Contents Important Safeguards 2 Chapter 1: Overview of Your Equipment 4 Your TV's Front Panel 4 Your TV's Back Panel 4 Your Remote Control 5 Installing your remote control batteries 6 Notes 6 Chapter 2: Connecting an Antenna or Cable to Your TV 7 Connecting an Antenna 7 Connecting a Cable System 8 Connecting Other Pieces of Equipment 9 Safety Note 9 Chapter 3: Operating Your TV 10 Turning your TV On 10 Programming Your TV's Channel Memory 10 Changing Channels 11 Changing the Vo
Résumé du contenu de la page N° 5
SAFETY IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP- MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ventilation 2 Save these instructions for later use. and to ensure reliable operation of the television equipment; and to protect it 3 Unplug this television equipment from the from overheatin
Résumé du contenu de la page N° 6
13 An outside antenna system should not be (f) When the television equipment exhibits located in the vicinity of overhead power a distinct change in performance - this lines or other electric light or power indicates a need for service. circuits, or where it can fall into such 18 When replacement parts are required, be power lines or circuits. When installing an sure the service technician has used outside antenna system, extreme care replacement parts specified by the should be taken to keep fr
Résumé du contenu de la page N° 7
CHAPTER 1 Overview of Your Equipment Your TV comes with a remote control. The section below summarizes the buttons, con- trols, and terminals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 VCHW Use these buttons to change channels on your TV, or to select items in the menu system. 3 CVOLB Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings. 4 MENU Use this butt
Résumé du contenu de la page N° 8
Your Remote Control 1 POWER Use this button to turn your TV on or off. 2 VCHW Use these buttons to change channels on your TV, or select items in the menu system. 3 CVOLB Use these buttons to change your TV's volume, 1 to activate selections in the menu system, or to change audio and video settings. 4 MENU 2 Use this button to turn the TV's menu system on and off. 3 3 5 RECALL 4 Press this button to display the channel number. 6 ADD/ERA 2 Use this button to add a channel to the TV's memory or er
Résumé du contenu de la page N° 9
Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. 1 2 3 Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your con- troller. Dispose of batteries properly; never throw them into a fire. Point your remote
Résumé du contenu de la page N° 10
CHAPTER 2 Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The anten- na terminal is a silver metal post partially surrounded by two plastic tabs. For help in locati
Résumé du contenu de la page N° 11
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna t
Résumé du contenu de la page N° 12
If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. If your cable system only requires you to use a converter box for some channels (i. e. pay-TV channels), follow these steps: Find the primary incoming coa
Résumé du contenu de la page N° 13
CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of the available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote 1 control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV's Chann
Résumé du contenu de la page N° 14
Changing Channels You can change channels in three ways: 1 The VCHW buttons will take you through all memorized chan- 1 nels, one by one. The VCHW buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the 2 section “Programming your TV's Channel Memory,” above. 2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its num- ber; the TV
Résumé du contenu de la page N° 15
Erasing a channel from memory 1 1 Tune to the channel you want to erase. 2 2 Press the ADD/ERA button on the remote control. The channel will turn from green to magenta to show it has been erased. Changing the TV's channel memory with the menus You can also use the menu system to add or erase channels from memory: 1 Use the number buttons to tune to the channel, then press MENU. 2 Use the VCHW buttons to select SETUP and press CVOLB. 3 Use the VCHW buttons to select EDIT PROGRAM. If the channel
Résumé du contenu de la page N° 16
Changing the TV’s Input Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV (such as a VCR) using the Audio/Video Inputs, you will want to be able to view the signal from that component. To do this, you will need to switch from the “TV” input to the “Video” input, as follows; 1 With the TV turned on, Press MENU 2 You will see the Main Menu, Use the VCHW buttons to select SETUP and press CVOLB. 3 Use the VCHW buttons
Résumé du contenu de la page N° 17
Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. 2 Use the VCHW buttons to select PICTURE. 3 Press the CVOLB buttons. The picture menu will appear. 4 The AUTO feature will be selected. Use the CVOLB button to turn AUTO to OFF. This will allow you to manually adjust the video settings. 1 2 3 4 5 Use the VCHW buttons to select the video setti
Résumé du contenu de la page N° 18
Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page. 2 Press the CVOLB buttons to set the AUTO setting to ON. This will return all video settings to their default levels, as set at the factory. 3 You can also return to the factory settings during normal TV viewing by pressing the AUTO.PICT button on the remote
Résumé du contenu de la page N° 19
CHAPTER 4 Setting the Sound Your TV set is capable of decoding a STEREO signal. Changing The Sound Mode 1 With TV turned on, press the MENU button. 2 Use the VCHW buttons to select sound. 3 Press the CVOLB buttons. The SOUND menu will be displayed. 4 Use the VCHW buttons to change the STEREO or MONO setting. 5 Wait 7 seconds, or press MENU twice to exit. 1 2 3 4 02 16 Chapter 4 : Setting the Sound
Résumé du contenu de la page N° 20
CHAPTER 5 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1 With the TV turned on, press the MENU button. 2 Use the VCHW buttons to select TIMER. 3 Press the CVOLB buttons. The TIMER menu will be displayed. 1 2 3 Setting the Clock 1 Follow steps 1-3 in “Accessing the Timer Menu,” above. 2 Press VCHW buttons to select C
