Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the To reduce the risk of electric shock, do not use TV to rain or moisture. this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ✍ You are cautioned that any changes or modifications not expressly approved in this manual ATTENTION could void your authority to oper
Résumé du contenu de la page N° 3
User Guide Object and Liquid Entry IMPORTANT SAFEGUARDS Never push objects of any kind into the set through the cabinet slots as they may touch For your protection, please read these instructions dangerous voltage points or short out parts completely, and keep this manual for future reference. that could result in a fire or electric shock. Carefully observe and comply with all warnings, cautions Never spill liquid of any kind on the set. and instructions placed on the set, or described i
Résumé du contenu de la page N° 4
Connecting Additional Equipment Never block the slots and openings Lightning by placing the set on a bed, sofa, rug For added protection for this television receiver during a or other similar surface. lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the Never place the set in a confined receiver due to lightning and power-line surges. space, such as a bookcase or
Résumé du contenu de la page N° 5
User Guide
Résumé du contenu de la page N° 6
Contents Introduction ® Introducing the FD Trinitron WEGA Features......................................................................... 1 About this Manual.......................................................................................................................... 2 Batteries for the Remote Control .................................................................................................. 2 Front Panel Menu Controls ........................................................
Résumé du contenu de la page N° 7
Résumé du contenu de la page N° 8
Introduction ® Congratulations on your purchase of the Sony FD Trinitron WEGA . Before you begin using this manual, please check the model number located on the rear of your TV or on the front cover of this manual. ® Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ FD Trinitron Flat CRT — Technologically advanced tube delivers a picture with uncompromising accuracy and outstanding image detail. ❏ Y, PB, PR Inputs — A component video input connection f
Résumé du contenu de la page N° 9
Operating Instructions About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once you’re connected, follow the instructions and use the remote control to access the on-screen menus. Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ Under normal condi
Résumé du contenu de la page N° 10
Introduction Using the Remote Controls Model RM-Y181 For KV-27FV300 model Button Description 1 MUTING Press to turn off the sound. Press again or press to restore sound. 2 SYSTEM OFF Press to power off the equipment programmed into L A the remote control, see “Programming the Remote Control” on page 49. 3 TV/VCR Press to switch between TV and VCR mode. If you M B have a non-Sony VCR, you will need to program N C the remote control to recognize your VCR. For details, see “Programming the
Résumé du contenu de la page N° 11
Operating Instructions Button Description qs POWER buttons Press to turn on and off the TV and other audio/ video equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 49. qd FUNCTION buttons Press to select the equipment (TV, VCR/DVD, SAT/ CABLE) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pushed to show which device the remote control is operating. qf PIP (Picture in Opera
Résumé du contenu de la page N° 12
Introduction Model RM-Y182 For KV-32FV300, KV-36FV300 models Outside Panel Button Description 1 MUTING Press to turn off the sound. Press again or press to restore the sound. 2 SYSTEM OFF Press to power off the equipment programmed into the qd 1 remote control, see “Programming the Remote Control” on page 49. qf 2 3 SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to remain on 3 qg before shutting off automatically. Cancel by
Résumé du contenu de la page N° 13
Operating Instructions Button Description qd POWER Press to turn on and off the TV and other audio/video buttons equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 49. qf FUNCTION Press to select the equipment (TV, VCR/DVD, SAT/ buttons CABLE) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pushed to show which device the remote control is operating. qg TV/VIDEO Press to cycl
Résumé du contenu de la page N° 14
Introduction Inside Panel Button Description 1 TV/VCR Press to switch between TV and VCR mode. If you have a non-Sony VCR, you will need to program the remote control to recognize your VCR. For details, see “Programming the Remote Control” on page 49. 2 VCR (operating) Operates your VCR. The VCR must be programmed 1 into the remote control. For instructions, see “Programming the Remote Control” on page 49. 2 Rewind. m 3 6 4 REC Press the button and the blank button - above, left - at the
Résumé du contenu de la page N° 15
Operating Instructions Connecting Your TV Read this section before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting. TV Rear Panel 1 3 4 MONITOR AUDIO OUT (VAR/FIX) 1 2 3 4 5 67 8 Jack Description 1AUX Allows you to view local and cable channels if your cable provider does not feature local channels. You can switch between local and cable channels easily by pressing ANT on the remote control. Devices con
Résumé du contenu de la page N° 16
Connecting Your TV Jack Description 5 AUDIO (L/R)/VIDEO Connects to the AUDIO and VIDEO output jacks on your VCR or other video equipment. A third video input jack (VIDEO 2) is located on the front panel of the TV. These AUDIO/VIDEO input jacks provide better picture quality than the VHF/UHF jack. 6 Y, PB, PR/ L, R Connects to the component video Y, PB, PR, and AUDIO L and R jacks on your DVD player or digital set-top box (480i only). 7MONITOR OUT Lets you record the program you are watchi
Résumé du contenu de la page N° 17
Operating Instructions Basic Connections TV with Indoor or Outdoor Antenna, or CATV Cable Depending on the cable available in your home, choose one of the connections below: (not supplied) ✍ If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for best reception. 10
Résumé du contenu de la page N° 18
Connecting Your TV Cable Box Connections Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to that kind of cable service, use this connection. Scrambled signals coming in to the TV through the cable box cannot be viewed in PIP. If some of your channels are scrambled, consider using the Cable Box and Cable connection. Cable Box and TV Cable Box 1 Rear of TV From Cable/ Antenna 2 1 Connect the coaxial cable from your cable se
Résumé du contenu de la page N° 19
Operating Instructions Cable Box and Cable Use this connection if you subscribe to a cable system that scrambles some channels (pay channels) but not all of them. This setup allows you to use the remote control to: ❏ change channels through your cable box when you are receiving a scrambled signal ❏ change channels through your TV This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Scrambled signals com
Résumé du contenu de la page N° 20
Connecting Your TV Connecting Additional Equipment Connecting a TV and VCR Rear of TV 1 3 4 2 VCR 1 Video (yellow) Audio L (white) Audio R (red) From cable/antenna Optional connection ✍ To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR). 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Optional c
