Résumé du contenu de la page N° 1
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 2
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. 4. Do not use this product near water; for example, near a bath tub, wash bowl, kitch
Résumé du contenu de la page N° 3
Battery Safety Precautions Caution: To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: 1. Use only the appropriate type and size Battery Pack specified in this Operating Guide. 2. Do not dispose of the Battery Pack in a fire. The cell may explode. Check the Nickel-Cadmium Battery Disposal package insert for disposal instructions. 3. Do not open or mutilate the Battery Pack. Released electrolyte is corrosive and may cause damage to the eyes or skin
Résumé du contenu de la page N° 4
® Cordless Extend•• A Phone charge Introduction Congratulations on your purchase of the Uniden DX834/DXC834 Cordless Telephone. These phones are designed to exacting standards which provide reliability, long life, and outstanding performance. Features The UltraClear Plus innovative technology, together • 25 Channels with 25 different channels, virtually eliminates • AutoSecure™ background noise and provides you with the best • Random Code™ Digital Security possible reception during all of your c
Résumé du contenu de la page N° 5
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void
Résumé du contenu de la page N° 6
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the Base Unit ant
Résumé du contenu de la page N° 7
Desk or Tabletop Installation 1. Place the Base 5. Plug the other on a desk or end of the cord tabletop. into the telephone jack on the wall. 2. Plug the AC Adapter cord into the 9V DC input 6. Plug the AC jack on the Base Adapter into a Unit. standard 120V AC wall outlet. Note: Do not 3. Place the AC use an outlet Adapter cord controlled by a around the strain wall switch. relief. \ Use only the Uniden AC Adapter supplied with this phone. 4. Plug one end of the long telephone cord into the TEL
Résumé du contenu de la page N° 8
Wall Installation 5. Place the Base Unit on the posts of Standard Wall Plate Mounting the wall plate These phones are designed to be mounted on a and push standard AT&T or GTE wall plate. down until it’s firmly seated. 1. Plug the AC Adapter into the Base Unit. 6. Plug the AC Adapter into a standard 120V AC wall outlet. 2. Place the AC Note: Do not Adapter cord use an outlet inside the controlled by molded a wall switch. channel. Direct Wall Mounting If you do not have a standard wall plate, you
Résumé du contenu de la page N° 9
2. Plug the AC 6. Place the Base Adapter into the Unit on the Base Unit. screws and push down until it’s firmly seated. 3. Place the AC 7. Plug the other Adapter cord end of the inside the telephone line molded channel. cord into the wall jack. 4. Plug one end of the long 8. Plug the AC telephone cord Adapter into a into the TEL LINE standard 120V jack on the Base AC wall outlet. Unit. Note: Do not use an outlet controlled by a wall switch. 5. Place the cord inside the molded channel on the bott
Résumé du contenu de la page N° 10
Setting the Handset Retainer The handset retainer holds the Handset in place if 3. Put the your phone is mounted on a wall. The steps below retainer back describe how to remove and replace the retainer so into its slot on that the tab faces up. the Base Unit. 1. Push up on the Handset retainer on the Base Unit, and 4. Push down on slide the tab the Handset out. retainer until it snaps into place. 2. Flip the retainer over so the tab faces up. 10 DX834/DXC834
Résumé du contenu de la page N° 11
Setting Up Your Phone Extending the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Then, fully extend the antenna. Installing the Handset Battery Pack 1. Press in on the 3. Align the plastic Battery Cover connector of the Release. Nickel-Cadmium battery pack with its socket and plug it in. Note: The black lead will be on the left when the plug is properly aligned. 2. Slide the battery compartment 4. Place the cover down. battery pack inside the battery co
Résumé du contenu de la page N° 12
page/find status UNIDEN AMERICA CORPORATION model : dxc834 cordless telephone charger INPUT : DC 9V 100mA use uniden AC adaptor AD-800 only made in China Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents. Contacts Charging from the Charging Cradle Charging the Battery Pack (Only for the DXC834 phone.) Initial Batte
Résumé du contenu de la page N° 13
Q 3 4. Place the Handset upright on the Charging talk flash/rdl talk batt low Cradle. The red 1 2abc ghi 5 jkl 4 7pqrs 8 tuv 9wxyz Status LED tone 0 oper mem r.tone r.vol chan pause volume lights while the unit is charging. Charge Battery Memory Effect Rechargeable batteries can develop a “memory” (reduced charge capacity) caused by repeated charge and discharge cycles. The battery life will seem to be shorter every time you use the unit. To Avoid this Memory Effect At least once
Résumé du contenu de la page N° 14
Low Battery Indicator Adjusting Ringer Controls To adjust the ringer volume of your Handset, press G when the phone is not in use. When the Battery Pack in the Handset is very You can also select one of two different ringer tones low and needs to be for the Handset. charged, the TALK/BATT LOW LED flashes. Press G to select a different ringer tone when the phone is not in use. Adjusting Handset Receiver Volume Volume settings are Normal and High. When the If the TALK/BATT LOW LED begins to flash,
Résumé du contenu de la page N° 15
Using Your Phone Making and Receiving Calls Changing Channels, Flash, and Page/Find The following features of the DX834 phone are different depending on the Handset’s location when To change channels or access call waiting while the you make or receive a call. phone is in use, or to use the one-way page to locate the Handset, follow these steps: Handset On Base Handset Off Base Press These Keys You Will Hear Pick up Handset Answer Call Press T. (AutoTalk) A click similar to PressC. 1) Pick up Ha
Résumé du contenu de la page N° 16
This Page Intentionally Blank.
Résumé du contenu de la page N° 17
Programming Your Phone All programming functions must be completed when your phone is in the standby mode because programming keys do not function while you are on the phone. Storing a Number in Memory Use these keys to store a number in memory. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. 1. Remove the Handset from the Base Unit. M 2. Press . The TALK/BATT LOW LED blinks. 3. Enter the number yo
Résumé du contenu de la page N° 18
Storing a Mixed Number If your phone is set up for Pulse dialing, you can store a mixed mode number so that you can easily access long distance services. Use these keys to store a mixed mode number in memory. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. 1. Remove Handset from the Base Unit. M 2. Press . The TALK/BATT LOW LED blinks. 3. Enter the 555 number 1212 to be dialed in pulse mode. 4. Pre
Résumé du contenu de la page N° 19
1. Store the access code into one of the memory Dialing a Stored Number numbers. To dial a number previously stored in memory, follow 2. Dial the main number. these steps: 3. 1. Problem Suggestion Charge light won’t come on when Handset is placed in Base • Make sure AC Adapter is plugged into the Base Unit and Unit. wall outlet. • Make sure Handset is properly seated in Base Unit. • Make sure that the charging contacts on the Handset and Base Unit are clean. Audio sounds weak and/or scratchy. •
Résumé du contenu de la page N° 20
Erasing a Stored Number To erase a number previously stored in a memory location (0-9), follow these steps: 1. Remove the Handset from the Base Unit. 2. PressM twice. 3. Press the memory location number (0-9). Note: An error tone will sound and the erase procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. 20 DX834/DXC834
