Résumé du contenu de la page N° 1
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 1
Butler 2405/2410
User Guide
Handleiding
Mode d’emploi
Bedienungsanleitung
Résumé du contenu de la page N° 2
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 2
Résumé du contenu de la page N° 3
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 3 Butler 2405/2410 !! Important !! To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone. !! Important !! Pour utiliser la fonction ‘Caller ID/Clip’ (affichage de l’appelant),
Résumé du contenu de la page N° 4
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 4 Butler 2405/2410 Safety Instructions • Only use the charger plug supplied. Do not use other chargers, as this may damage the battery cells. • Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the battery compartment of the handset). • Do not touch the charger and plug contacts with sharp or metal objects. • The operatio
Résumé du contenu de la page N° 5
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 5 Butler 2405/2410 Butler 2405/2410 1 INSTALLATION 7 2 KEYS/LED 8 3 DISPLAY (LCD) 9 4 OPERATION 10 4.1 Setting the language 10 4.2 Making Calls 10 4.2.1 External Call 10 4.2.2 Number preparation 10 4.2.3 Redialling the last number dialled 10 4.2.4 Redial one of the last 5 numbers dialled 11 4.2.5 Calling a programmed number from the Phone Book 11 4.2.6 An internal call: calling another handset 11 4.3 Receiving a Call 11 4.3.1 Receiving an external ca
Résumé du contenu de la page N° 6
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 6 Butler 2405/2410 Butler 2405/2410 4.22 The R key (flash) 19 4.23 Changing the PIN code 19 4.24 Subscribing a handset to a Butler 1000, 1010, 1210, 2405, 2410 base unit 20 4.25 Subscribing Butler 2405/2410 handset on another base (other brand/model) 20 4.26 Subscribing a Butler 1800T handset to a Butler 24xx base unit 21 4.27 Removing subscription of a handset to a base unit 21 4.28 Selecting a base unit 22 4.28.1 Automatic selection 22 4.28.2 Manual
Résumé du contenu de la page N° 7
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 7 Butler 2405/2410 Butler 2405/2410 1 INSTALLATION Before you use the telephone for the first time, you must first make sure the battery is charged for 20 hours. If you do not do this, the telephone will not work optimally. For installation, do the following: • Plug one end of the adaptor into the outlet and the other end into the adapter jack on the bottom of the telephone. • Connect one end of the telephone cord with the wall phone jack and the ot
Résumé du contenu de la page N° 8
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 8 Butler 2405/2410 Butler 2405/2410 Battery indicator: • The battery is fully charged. • The battery is half drained (50%) • The battery is low. When the battery is low, you will hear warning signals and the battery symbol on the display will blink. 2KEYS/LED 1 Display 2 Line key 3 Up/Handsfree key / 4 Programming key 5 Phonebook key 6 Redial/Pause key /P 7 Microphone 8 Volume/Ringer key / 9 Alphanumeric keys 10 Delete/Mute key 11 Down/Flash ke
Résumé du contenu de la page N° 9
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 9 Butler 2405/2410 Butler 2405/2410 3 DISPLAY (LCD) 4 00000000000000 88888/88888:88 12 3 1 Number of calls received. 2 Date (day/month) of calls received. 3 Time (hour:minutes) of calls received. 4 Call information. 5 Symbol display ( ): - this symbol means that the handset is located within the range of the base unit. - when this symbol starts blinking, this means you are beyond the range of the base unit. Move closer to the base unit so that the
Résumé du contenu de la page N° 10
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 10 Butler 2405/2410 Butler 2405/2410 4 OPERATION 4.1 Setting the language The telephone has 5 display languages: see display languages table on packaging!! To set the language, do the following: • Press the Programming key . • Press the Up or Down key repeatedly until ‘SETTING’ appears on the display • Press the Programming key . • ‘LANGUE’ appears on the display. • Press the Programming key . • The language set appears on the display. • Press the
Résumé du contenu de la page N° 11
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 11 Butler 2405/2410 Butler 2405/2410 4.2.4 Redial one of the last 5 numbers dialled • Press the Redial key . The number you last called appears on the display. If you would like to dial one of the last 5 numbers dialled, press the Redial key a few times until the desired number appears on the display. • Press the Line key . • The number shown on the display is dialled automatically without you having to re-enter the number. • After finishing your c
Résumé du contenu de la page N° 12
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 12 Butler 2405/2410 Butler 2405/2410 4.3.2 Receiving an internal call This function only works if multiple handsets are subscribed to the base unit! • The handset rings. • ‘INT’ and the number of the handset you are trying to reach, appear on the display. The Call symbol blinks on the display. • Press the Line key to accept the internal call. • During the call, ‘INT’, the handset number of the caller and the symbol appear on the display. The call t
Résumé du contenu de la page N° 13
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 13 Butler 2405/2410 Butler 2405/2410 4.7 Out of Range Warning If the handset is out of range of the base unit, a warning signal will sound. • ‘SEARCHING’ appears on the display and the symbol blinks on the display. • Move closer to the base unit. • As soon as you are back within range of the base unit, a signal sounds and the symbol stops blinking. 4.8 Setting the speaker volume Use the Volume/Ringer key / to set the volume of the speaker (handset).
Résumé du contenu de la page N° 14
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 14 Butler 2405/2410 Butler 2405/2410 • Press the Programming key . • The external call is now on hold. • ‘INT‘ appears on the display. • Dial the number of the handset you would like to include in the call. • Once the handset dialled is answered, keep the ‘#’ key pressed for 3 seconds. • ‘CONFERENCE’ appears on the display. • Now you are connected to one external and one internal caller (conference call). 4.13 Locating a misplaced handset (paging) If
Résumé du contenu de la page N° 15
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 15 Butler 2405/2410 Butler 2405/2410 • ‘SEARCH‘ appears on the display. •Press the Up or Down key repeatedly until ‘ADD NEW’ appears on the display. • Press the Programming key . • ‘NAME‘ appears on the display. • Enter the name. Use the alphanumeric keys. • Press the Programming key . • Enter the telephone number. Use the alphanumeric keys. • Press the Programming key . • You will hear a long beep. The name and the number are stored in the Phone Boo
Résumé du contenu de la page N° 16
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 16 Butler 2405/2410 Butler 2405/2410 •Press the Programming key . • The first number in the Phone Book appears on the display. • Press the Up or Down key until the number you want to delete appears on the display. • Press the Delete key . • ‘DELETE ?’ appears on the display. •Press the Programming key to confirm that you want to delete it. 4.16 Turning the handset on/off 4.16.1 Turning the handset off The handset is turned on. • Press the Programming k
Résumé du contenu de la page N° 17
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 17 Butler 2405/2410 Butler 2405/2410 • ‘EXTERNAL‘ appears on the display. • Press the Up or Down key repeatedly until ‘INTERNAL’ appears on the display. • Press the Programming key . • Press the Up or Down key repeatedly until ‘VOLUME’ appears on the display. • Press the Programming key . • The current volume level appears on the display. • Enter a number between 1 and 9 to select the desired ringer volume. Use the number keypad to do this. • Press
Résumé du contenu de la page N° 18
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 18 Butler 2405/2410 Butler 2405/2410 4.19.1 Setting the base ring volume (0-9) • Press the Programming key . • Press the Up or Down key repeatedly until ‘RING SEL’ appears on the display. • Press the Programming key . • ‘EXTERNAL‘ appears on the display. • Press the Up or Down key repeatedly until ‘BASE’ appears on the display. • Press the Programming key . • Press the Up or Down key repeatedly until ‘VOLUME’ appears on the display. • Press the Progr
Résumé du contenu de la page N° 19
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 19 Butler 2405/2410 Butler 2405/2410 • Press the Programming key . •Press the Up or Down key repeatedly until ‘KEY CLICK’ appears on the display. • Press the Programming key . • The current status appears on the display: - ‘CLICK ON’: turn on key click - ‘CLICK OFF’: turn off key click • Press the Up or Down key to make your selection. • Press the Programming key to confirm your selection. 4.22 The R key (flash) Press the Flash key ‘R’ to use certain s
Résumé du contenu de la page N° 20
HANDL. B2405_10.qxd 24/4/02 4:30 pm Pagina 20 Butler 2405/2410 Butler 2405/2410 Caution : Do not forget your personal PIN code. If you do, you have to restore the default settings (reset – see section 4.31). 4.24 Subscribing a handset to a Butler 1000, 1010, 1210, 2405, 2410 base unit In order to be able to make and receive telephone calls, a new handset has to be subscribed to the base unit. You can subscribe 5 handsets to one base unit. By default, each handset is sub- scribed as handset 1
