Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
UC393BH (WXI377) OM 5/2/03 4:17 PM Page 2
Résumé du contenu de la page N° 3
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 3 Step 1 Checking the Package Contents Step 4 Setting Display Options Plug the AC adapter cord into the C base unit and then into a 120V Make sure you have received the following AC outlet. items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. Note: Your handset comes with the battery already connected. You must activate the handset. Please see the instructions below. • Base unit • Beltclip • Handset
Résumé du contenu de la page N° 4
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 4 Contents Editing a Stored Name and/or Phone Number 27 Quick Reference Guide 3 Erasing a Stored Name and Phone Number 29 Welcome/Features 5 RocketDial Controls and Functions 6 RocketDial 30 Getting Started Storing and Editing the RocketDial 30 Setting up the Phone 8 Making Calls with the RocketDial 30 Mounting the Base Unit on a Wall 13 Deleting the RocketDial 31 Setting Menu Options 15 Caller ID Features Basics Caller ID 32 Making and Receiving Calls
Résumé du contenu de la page N° 5
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 5 Congratulations on your purchase of the Uniden WXI377. This cordless phone is designed Welcome and engineered to exacting standards for reliability, long life, and outstanding performance. Note: • Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. • JIS7 Specs is a water submersion standard. The cordless handset was designed to be submerged in water to a depth of
Résumé du contenu de la page N° 6
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 6 Controls and Functions 1. Handset antenna 2. Ringer speaker 1 3. Beltclip hole 4. Handset battery compartment 2 5. Handset earpiece 5 3 6. LCD display 7. Vol (volume)/+ (up) key 8. Cid (caller ID)/menu key 6 9. Talk/flash key 7 10. /tone/ (left cursor) key t 8 13 * 11. Redial/P (pause) key 9 14 15 12. Select key 13. RocketDial key 4 14. End key 10 16 15. Vol (volume)/- (down) key 11 17 16. #/ (right cursor) key s 12 18 17. Mem (memory) key 19 18. Del
Résumé du contenu de la page N° 7
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 7 20. Base antenna 21. Charge/in use LED 20 22. Find handset key 23. Telephone line jack 24. DC IN 9V jack 21 22 23 24 www.uniden.com CONTROLS AND FUNCTIONS [ 7 ]
Résumé du contenu de la page N° 8
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 8 Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Activate the handset before charging the battery If your home has A. Choose the best location specially wired alarm Before choosing a location for your new phone, read “Installation Considerations” on equipment connected to page 44. Here are some important guidelines you should consider: the telephone line, be sure that installing the Avoid heat source
Résumé du contenu de la page N° 9
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 9 B. Activate the handset before charging the battery The handset is powered by a rechargeable battery pack already installed in the handset’s battery compartment. Before charging the battery for the fist time, push the pin for activation, located on the bottom of the handset (see label with instructions). Once activated, remove the label and then • Use only the Uniden (BT-909) rechargeable place the handset in the base unit to charge. battery pack su
Résumé du contenu de la page N° 10
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 10 Replace the rechargeable handset battery pack 1) Remove the 3 screws holding the battery compartment with a screwdriver and take off the battery cover. Remove the old battery pack in the battery compartment. • If there is any foreign matter on the rubber 2) Plug the replacement battery connector (red & black wires) seal located on the into the small, black jack inside the battery compartment. under side of the battery cover, the (The connector notche
Résumé du contenu de la page N° 11
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 11 If the rubber seal appears warn, nicked, or dried out, replacement seals are available through the Uniden Parts Department. If you have questions regarding installation of battery pack and/or rubber seal, please call our Customer Hotline at 1-800-297-1023. • Even when the Battery use time (per charge) battery pack is not being used, it will From fully charged (15-20 hours charge time) gradually discharge • Up to seven hours continuous use during talk
Résumé du contenu de la page N° 12
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 12 C. Connect the base unit Route the cord. 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and • The base is not place the handset in the base unit. water resistant. Also wipe off a dirty or wet handset before placing in the base. 3) Make sure that the charge/in use LED illuminates. • Use only the If the LED does not illuminate, check to see that the AC adapter is plugged s
Résumé du contenu de la page N° 13
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 13 Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Plug the AC adapter into the DC IN 9V jack. outlet controlled by a wall switch. 2) Wrap the AC adapter cord inside the molded wiring channel as shown. 3) Plug the AC adapter into a standard 120V AC wall outlet. 4) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as
Résumé du contenu de la page N° 14
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 14 Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of
Résumé du contenu de la page N° 15
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 15 Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. You must subscribe to Caller ID/Call Waiting services through your telephone company. AutoTalk allows you to answer the phone without pressing talk/flash. If the phone rings when AutoTalk is On, simply remove the handset from the base and the phone automatically answers the call. If
Résumé du contenu de la page N° 16
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 16 Entering Your Area Code If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. 1) When the phone is in the standby mode, press and hold
Résumé du contenu de la page N° 17
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 17 Choosing the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems such as in rural areas still use pulse dialing. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: Make sure your battery 1) When the phone is in the standby mode, press and hold pack is fully charged cid/menu. The following screen appears. before choosing the dialing
Résumé du contenu de la page N° 18
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 18 Setting the language 1) When the phone is in the standby mode, press and hold cid/menu. The following screen appears. 2) Press 5 or the vol/- key four times to select “Language”. 3) Press select to toggle between “Eng” (English) and “Fr.” (French) for each setting. 4) Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode. [ 18 ] GETTING STARTED
Résumé du contenu de la page N° 19
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 19 Making and Receiving Calls Handset On Base Handset Off Base Pick up the handset (AutoTalk) Press talk/flash, any number, To answer or pick up the handset and press /tone/ or #/ (AutoTalk). t s a call * Refer to page 15 talk/flash. “Setting Menu Options” 1) Pick up the handset. 1) Press talk/flash. to turn On the AutoTalk 2) Press talk/flash. 2) Listen for the dial tone. feature if desired. 3) Listen for the dial tone. 3) Dial the number. 4) Dial the
Résumé du contenu de la page N° 20
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 20 Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume Press vol/+ or vol/- in standby mode to select one of five ringer tones and volume combinations. If you select “Ringer Off”, “” Earpiece volume appears on the display when you make or Pressing vol/+ or vol/- during a call will change the earpiece receive calls, or when volume of the handset. This setting will remain in effect after charging the handset. the te
