Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Contents Editing a Stored Name and/or Phone Number 29 Welcome/Features 4 Erasing a Stored Name and Phone Number 31 Controls and Functions 5 RocketDial Getting Started RocketDial 32 Installing the Phone 7 Storing and Editing the RocketDial 32 Mounting the Main Base Unit on a Wall 12 Making Calls with the RocketDial 32 Register Handsets to the Main Base Before Using! 14 Deleting the RocketDial 33 When to Re-register Handsets 15 Call Transfer Feature 15 Caller ID Features Caller ID and CIDCW (Calle
Résumé du contenu de la page N° 4
Congratulations on your purchase of the Uniden dual handset cordless telephone. This Welcome cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. • 5.8 GHz Extended Range Technology • One-Touch RocketDial Features • Dual Handset System • Call Transfer from Handset to Handset (Extra Han
Résumé du contenu de la page N° 5
Controls and Functions Handsets 1. Handset antenna 2. Beltclip hole 3. Headset jack 1 4. Handset battery compartment 5. Handset earpiece 6. LCD display 5 7. call id (Caller ID)/menu key 2 8. vol/ / (volume & scroll) key 9. vol/ / (volume & scroll) key 6 10. /tone/ (left cursor) key 11. redial/pause key 7 14 3 12. select/channel key 8 15 9 13. Handset microphone and 16 ringer speaker 14. RocketDial key 15. end key 4 16. talk/flash key 10 17 17. #/ (right cursor) key 11 18 18. memory key 12 19 13
Résumé du contenu de la page N° 6
Main Base Unit 21 22 23 25 26 24 Extra Charging Cradle (for Second Handset) 21. Base antenna 22. charge/in use and VMWI (voice mail waiting) LED 29 23. find handset key 24. Base charging contacts 25. Telephone line jack 27 26. DC IN 9V jack 27. Charging contacts 28. Charge LED 29. DC IN 9V jack 28 [ 6 ] CONTROLS AND FUNCTIONS www.uniden.com
Résumé du contenu de la page N° 7
GETTING STARTED Installing the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery packs into both handsets C. Connect the main base unit and charging cradle If your home has specially wired alarm A. Choose the best location equipment connected to When choosing a location for your new phone, here are some important guidelines the telephone line, be you should consider: sure that installing the system does not disable Avoid heat sources, such as radiators
Résumé du contenu de la page N° 8
B. Install the rechargeable battery packs into both handsets Both handsets are powered by a rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base unit or charging cradle. Charge the handset battery pack for at least 15-20 hours For optimum before using your new cordless telephone for the first performance use only time! To maximize the charge capacity of your battery pack, the Uniden BT-800 DO NOT plug the telephone cord into the main base u
Résumé du contenu de la page N° 9
GETTING STARTED 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset in the main base unit and one handset in the charging cradle for 15-20 hours without interruption. The main base or charging cradle unit’s • Replacement batteries LED light (labeled charge/in use or charge) illuminates are also available once the handset is placed in the main base or charging through the Uniden Parts Department at cradle. The LED light will i
Résumé du contenu de la page N° 10
Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery flashes on the LCD and none of the keys will operate. • Even when the If the phone is in use, Low Battery flashes and the handset battery pack is not beeps. Complete your conversation as quickly as possible and being used, it will return the handset to either cradle for charging. gradually discharge over a lon
Résumé du contenu de la page N° 11
GETTING STARTED C. Connect the main base unit and charging cradle 1) Connect each AC adapter to the DC IN 9V jack Route the cord. and to each standard 120V AC wall outlet. 2) Place one handset in the main base unit and the other in the charging cradle. Use only the supplied AD-314 AC adapter for 3) Make sure that the charge/in use and charge the main base and LED illuminate. If the LED does not illuminate, AD-310 for the check to see that the AC adapter is plugged in charging cradle. Do not an
Résumé du contenu de la page N° 12
Mounting the Main Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Plug the AC adapter into the DC IN 9V jack. outlet controlled by a wall switch. 2) Wrap the AC adapter cord inside the molded wiring channel as shown. 3) Plug the AC adapter into a standard 120V AC wall outlet. 4) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown. 5) Plug the telephone line cord i
Résumé du contenu de la page N° 13
GETTING STARTED Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #
Résumé du contenu de la page N° 14
Register Handsets to the Main Base Before Using! Whichever handset you choose to charge in the main base will automatically register to the base. The second handset (charging in the extra charging cradle) MUST also be registered • When you charge the to the main base before use. Follow the steps below to register the second handset. handsets, Caller ID 1) Be sure both handsets are fully charged. summary screen and the name of the 2) Remove the handset from the charging cradle, and place it in t
Résumé du contenu de la page N° 15
GETTING STARTED When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 14) each time the digital security code is changed. Refer to page 40 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: • Make sure to return the If power failure occurs (e.g. due to electrical storm or if the unit is unplugged handsets to the charg- during a move), both handsets will need to be re-registered. To re-register, f
Résumé du contenu de la page N° 16
Setting Menu Display Options There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. To confirm which handset is HS1, refer to the display indicating HS1 or HS2. AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2. The cordless phone features inclu
Résumé du contenu de la page N° 17
GETTING STARTED 1) When the phone is in standby mode, press and hold call id/menu. The following screen appears. 2) Press vol/ / to move the pointer to Area Code. 3) Press select/channel. If an area code has been already stored, the phone displays it. 4) Use the number keys (0 - 9) to enter a 3-digit area code. To change a previously–entered area code, use the delete/transfer to backspace. 5) Press select/channel. A confirmation tone sounds and the displayed area code is entered. 6) Press end
Résumé du contenu de la page N° 18
1) Be sure you are using handset 1. Handset 1 shows HS1 in its display. 2) When the phone is in standby mode, press and hold call id/menu. The following screen appears. 3) Press vol/ / three times to select Dial. • If you are not sure of your dialing system, set for tone dialing 4) Press select/channel to set the phone to Pulse dialing. and make a trial call. If the call connects, 5) Press end and return the handset to the main base unit to complete the setting. leave the setting as is. The ha
Résumé du contenu de la page N° 19
GETTING STARTED BASICS Making and Receiving Calls Handset On Main Base or Charging Cradle Handset Off Main Base or Charging Cradle Remove the handset (AutoTalk: Press talk/flash (AutoTalk: Off), Receiving On) or remove the handset and or press talk/flash, /tone/ , a call press talk/flash (AutoTalk: Off). #/ or any number key Refer to page 16 (AutoTalk: On). "Setting Menu Display Options" to turn On the 1) Remove the handset. 1) Press talk/flash. AutoTalk feature if 2) Press talk/flash. 2) Listen
Résumé du contenu de la page N° 20
Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume Press the volume up key or volume down key (labeled as vol/ / or vol/ / ) in standby mode to select one of five ringer tones and volume combinations. Earpiece volume To change the earpiece volume, press vol/ / or vol/ / keys during a call. This setting will remain in effect after the telephone call has ended. Temporarily Mute Ringer If the handset is off the base, simply press end to temporarily mute the incoming rin
