Résumé du contenu de la page N° 1
43-3548.fm Page 1 Tuesday, February 25, 2003 1:06 PM
2.4 GHz Cordless Telephone
Caller ID/Call Waiting ID
43-3548
20-Number Memory Dialing — lets you store up to 20 numbers in memory
for easy dialing. (See “Storing Phone Numbers and Names” on page 20.)
Ample Talk and Standby Time —
the supplied battery (when fully
charged) provides about 7 hours of
talk time or 14 days of standby time.
Headset Jack — lets you connect an
optional headset for hands-free
convenience. (See “Using a Headset”
Résumé du contenu de la page N° 2
Important Information 43-3548.fm Page 2 Tuesday, February 25, 2003 1:06 PM CONTENTS Important Information . 2 FCC Statement .......... 2 Surge Proection ......... 3 Important Safety Instructions ............... 4 Battery Safety As an ENERGYSTAR Partner, Instructions ................. 5 RadioShack Corporation has Introduction .............. 7 determined that this product meets the ENERGYSTAR guidelines Installation ................ 8 for energy efficiency. Selecting a Location ... 8 Conne
Résumé du contenu de la page N° 3
43-3548.fm Page 3 Tuesday, February 25, 2003 1:06 PM equivalence number, or REN on the back of CONTENTS your phone. (continued) Making Calls with If you use more than one phone or other Memory Dialing ........ 23 device on the line, add up all of the RENs. If Chain Dialing ........... 24 Editing a Stored Name the total is more than five (three in rural and/or Phone areas), your telephones might not ring. If Number .................... 24 ringer operation is impaired, remove a Erasing a
Résumé du contenu de la page N° 4
Important Safety Instructions 43-3548.fm Page 4 Tuesday, February 25, 2003 1:06 PM IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Never install telephone wiring during a lightning storm. 4. Never install telephone jacks in wet
Résumé du contenu de la page N° 5
43-3548.fm Page 5 Tuesday, February 25, 2003 1:06 PM 13. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be stepped on. 14. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 15. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any
Résumé du contenu de la page N° 6
Important Safety Instructions 43-3548.fm Page 6 Tuesday, February 25, 2003 1:06 PM 1. Use only the appropriate type and size battery pack specified in the instruction manual provided for this product. 2. Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Ex
Résumé du contenu de la page N° 7
43-3548.fm Page 7 Tuesday, February 25, 2003 1:06 PM INTRODUCTION Thank you for purchasing a RadioShack 2.4 GHz Cordless Telephone. Your phone uses advanced technology to give you superior audio quality and extended range. The phone’s Caller ID unit records each caller’s telephone number (and name, if available in your area) and the date and time of the call, as provided by your local phone company to Caller ID service subscribers. If you subscribe to Call Waiting with Caller ID, the
Résumé du contenu de la page N° 8
Installation 43-3548.fm Page 8 Tuesday, February 25, 2003 1:06 PM INSTALLATION CAUTION Before using your phone, carefully peel the You must use a Class 2 protective film off the display. The film ! power source protects the handset window during that supplies 9V DC and shipment and is not necessary for use. delivers at least 210 mA. Its center tip must be set to positive and its plug SELECTING A LOCATION must fit the phone's DC You can place the phone’s base on a desk IN 9V jack. T
Résumé du contenu de la page N° 9
43-3548.fm Page 9 Tuesday, February 25, 2003 1:06 PM On a Desk Top 1. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. 2. Plug the modular cord’s other end into a modular phone line jack. TEL 3. Insert the LINE DC IN 9V supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base. 4. Route the adapter’s cord through the strain relief slot on the base, then plug the adapter into a standard AC outlet. 5. Lift the b
Résumé du contenu de la page N° 10
Installation 43-3548.fm Page 10 Tuesday, February 25, 2003 1:06 PM 4. Plug the adapter into a standard AC outlet. 5. Lift the base’s antenna to a vertical position. On a Wall To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base. 15 1. Drill two holes 3 /16 inches (100 mm) apart. Then thread a screw into each 1 hole, letting the heads extend about /8 inch (3 mm) from the wall. 2. Plug one end of t
Résumé du contenu de la page N° 11
43-3548.fm Page 11 Tuesday, February 25, 2003 1:06 PM CONNECTING/CHARGING THE IMPORTANT ! ! BATTERY PACK The EPA certified The phone comes with a rechargeable ® RBRC nickel-cadmium battery pack in the handset, Battery but not connected. Before using your Recycling phone, you must connect the battery pack, Seal on the nickel- then charge it for about 15–20 hours. cadmium (Ni-Cd) battery ! indicates RadioShack is voluntarily participating in 1. Press down and slide off the batte
Résumé du contenu de la page N° 12
Installation 43-3548.fm Page 12 Tuesday, February 25, 2003 1:06 PM • If the base loses power for about an IMPORTANT ! ! hour while the handset is away from it, Be sure the battery pack is the security access-protection code properly connected before might be lost. To change the code, you try to charge it. The while holding PAGE, return the handset CHARGE/IN USE indicator to the base for about 3 seconds. lights when the handset is on the base, even if the • If the battery pack be
Résumé du contenu de la page N° 13
43-3548.fm Page 13 Tuesday, February 25, 2003 1:06 PM • The supplied battery pack should last for about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6-volt, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through RadioShack. Install the new battery pack and charge it for about 15–20 hours. OPERATION MAKING AND RECEIVING CALLS
Résumé du contenu de la page N° 14
Operation 43-3548.fm Page 14 Tuesday, February 25, 2003 1:06 PM Action Handset On Base Handset Off Base To Press end or return the handset to the hang base (Auto Standby). up 1)Pick up the 1)Press talk/ handset. FLASH. 2)Press talk/ 2)Listen for the dial FLASH. tone. 3)Listen for the dial 3)Press REDIAL/ tone. PAUSE. 4)Press REDIAL/ OR To PAUSE. Press REDIAL/ redial OR PAUSE, then press 1)Pick up the talk/FLASH. handset. 2)Press REDIAL/ PAUSE, then press talk/ FLASH. ADJUSTING THE HAND
Résumé du contenu de la page N° 15
43-3548.fm Page 15 Tuesday, February 25, 2003 1:06 PM Temporarily Mute Ringer If the handset is off the base, simply press the end key to temporarily mute the incoming ring. The ringer will sound with the next incoming call. REDIAL The REDIAL/PAUSE key redials the last number dialed. The redialed number can be up to 32 digits long. TONE DIALING SWITCH-OVER Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter
Résumé du contenu de la page N° 16
Operation 43-3548.fm Page 16 Tuesday, February 25, 2003 1:06 PM SELECTING A DIFFERENT CHANNEL If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in SSccaannnniinngg use. Press DELETE/CHANNEL. ¨SSccaannnniinngg¨ appears on the display, indicating the phone is changing to another channel. Ô NOTE Ô PAGE Page To locate the handset (while it’s off the You can cancel paging by ba
Résumé du contenu de la page N° 17
43-3548.fm Page 17 Tuesday, February 25, 2003 1:06 PM You may need to occasionally reset the indicator if it remains On after you have retrieved your messages. To reset the indicator, press and hold PAGE for 5 second. SETTING MENU OPTIONS There are five setup options available. They are Caller ID options [Auto Talk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. Auto Talk Auto Talk allows you to answer the phone without pressing the talk/FLASH button. If the ph
Résumé du contenu de la page N° 18
Operation 43-3548.fm Page 18 Tuesday, February 25, 2003 1:06 PM AREA CODE Ô NOTE Ô If you enter a 3-digit area code number in Area Code the Area Code option, your local area code • If your calling area does not appear in Caller ID messages. Do requires 10-digit dialing, not program this option, if your calling area do not program this requires 10-digit dialing. When reviewing option. Caller ID messages, you will see only the • When the area code local seven digit number. For calls
Résumé du contenu de la page N° 19
43-3548.fm Page 19 Tuesday, February 25, 2003 1:06 PM 1. When the phone is in the standby mode, press and hold CID/MENU. 2. Press VOL d key three times to select DDiiaall ¨DDiiaall¨. 3. Press SELECT to toggle between TToonnee PPuullssee ¨TToonnee¨ and ¨PPuullssee¨ for each setting. 4. Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode. • If you are not sure of your dialing system, set for tone dialing. Make a trial call. I
Résumé du contenu de la page N° 20
Operation 43-3548.fm Page 20 Tuesday, February 25, 2003 1:06 PM Storing Phone Numbers and Ô NOTE Ô Names Memory Dialing allows you to dial a number In memory dialing operation, you must press using just a few key presses. Your cordless a key within 30 seconds or telephone stores up to 20 names/numbers the phone will return to the in the handset. Ô standby mode. If you return the handset to the SSeelleecctt MMeemmoorryy 1. Press MEM, ¨SSeelleecctt MMeemmoorryy¨ is base, the phone
