Résumé du contenu de la page N° 1
Oricom eco90 Series
DECT Digital Cordless Phone
USER GUIDE
Keep this user guide for future reference.
Résumé du contenu de la page N° 2
TABLE OF CONTENTS WARNINGS AND SAFETY INFORMATION 1 GETTING STARTED 3 FEATURES 5 BASIC OPERATION 8 MULTI-HANDSETOPERATION 10 REDIAL OPERATION 11 CALLER ID OPERATION 12 PHONE BOOK 15 MENU OPERATION 17 REGISTRATION 24 TECHNICAL SPECIFICATIONS 26 TROUBLESHOOTING GUIDE 27 APPENDIX 29
Résumé du contenu de la page N° 3
WARNINGS AND SAFETY INFORMATION 1 IMPORTANT between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise. The telephone is compatible with most popular hearing aids on the market. However, base cabinet. due to the wide range of hearing aids available, there is no guarantee that the telephone will function the battery contacts and charging conductors. "problem free" with every model. damaged by
Résumé du contenu de la page N° 4
2 WARNINGS AND SAFETY INFORMATION thunderstorm as it is possible to get an electric shock. telephone line or an analogue extension port of a PBX system. If you connect this device to a digital extension of a PBX, damage may result to the PBX. CAUTION Use only the mains adaptors supplied with this product. ! Incorrect adaptor polarity or voltage can seriously damage the unit. Adaptor for base unit: Adaptor for charger:
Résumé du contenu de la page N° 5
GETTING STARTED 3 Installation and Charger WARNING 1. Connect the mains adaptor (supplied) to the socket on ! the back of the base unit and to the wall mains supply. 2. Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket. batteries (included), observing the correct polarity, into the battery type supplied with this product. compartment on the handset. Slide the battery door firmly into place. 4. Place the ha
Résumé du contenu de la page N° 6
4 GETTING STARTED Pack contents Purchasing additional handsets should contain the following items: (eco9050). These can be purchased directly from Oricom (Australia). The eco90 can accommodate a total of 6 If any of these are missing, please contact Oricom directly. cordless handsets. Base units 1 1 IMPORTANT: Cordless handsets 1 2 DO YOU HAVE BROADBAND/ADSL? If you do, you must connect an in line filter (not supplied) between Charging cradle and power adaptor 0 1 the telephone socket and yo
Résumé du contenu de la page N° 7
FEATURES 5 Your cordless handset + – Handsfree
Résumé du contenu de la page N° 8
6 FEATURES Your Base unit LED state Pattern Function Steady On Flashes When there is incoming ring signal Pattern Function Steady On When handset is in the cradle and charging Flashes When paging, in cadence with ringing signal Pattern Function When message waiting received, or incoming Flashes ring signal. Paging key
Résumé du contenu de la page N° 9
FEATURES 7 LCD Display Icon Description Antenna icon Phone icon Key lock icon Speakerphone icon Battery level indicator New call icon Alarm icon
Résumé du contenu de la page N° 10
8 BASIC OPERATION Make a Call Adjust the Receiver and Speakerphone Volume 1. Press the [ ] or [ ] key, wait for a dial tone, then dial the desired number. 2. After finishing the conversation, press [ ] key or the handset to adjust the receiver or speaker volume of place the cordless handset into the charger. the handset. The display will show the current volume level The talk timer will be shown during talk. during adjusting. Note: Answer a Call In standby mode pre
Résumé du contenu de la page N° 11
BASIC OPERATION 9 Dialling from the Phone Book Paging the Handset Press [ If a handset has been misplaced, it is possible to page all on the handset will display “PHONEBOOK”, then press the handsets. [ ] button and the first entry in the phone book Press [ ] key on the base to station. appears. To stop the page call: Press any key on the handset or Note: press [ ] key again on the base. will display. Switching the Keypad Lock On/Off Press and hold [ ] key
Résumé du contenu de la page N° 12
10 MULTI-HANDSET OPERATION 3. If you want to transfer the call to the target handset, only Multi-Handset operation end the call. The call will be automatically transferred to the target handset. cordless handsets registered to the base. Note: If the handset doesn’t answer within 30 seconds, the Intercom call transfer will be cancelled and the external call will return to the original handset. Press the [ ] or [ ] key to answer the call. 1. When the handset is in standby mode, pres
Résumé du contenu de la page N° 13
REDIAL OPERATION 11 3. Press [ Redial Function record can’t be saved. The last 10 numbers you dialed out will be separately stored in handset redial memory. 4. Press [ ] key again, the selected number will be shown. 5. Press [ ] key to save. Review Redial Record 1. When the handset is in standby mode, press [ ]. Delete a Single Redial Record 1. Select a redial record. press [ ] key. 2. Press [ Or 3. Press [ 1
Résumé du contenu de la page N° 14
12 CALLER ID OPERATION Caller ID Service Call waiting The caller’s information will be displayed and recorded if you are on the phone. However this service will need to telephone company. be turned on. For example to turn on Telstra’s Call Waiting service: When the telephone rings, the caller’s information will be 1. Press [ ] to wait for dial tone then Press [ ] [ 4 ] includes the phone number and name (if supported). The [ 3 ] [ ]. handset can store up 20 calls for late
Résumé du contenu de la page N° 15
CALLER ID OPERATION 13 Save Call Log Record Note: 1. If you reviewed all the missed calls from one handset, 1. Select a call log record. the display “ ” will show on other handsets. 2. Press [ ] key to toggle the display of the caller key (use [ ] keys to delete the digits, but the last 6 digits can’t be deleted) before save to phone book. 3. Press [ Review Call Log Record to select “SAVE TO PHONEBOOK”, press [ ] key, 1. When the handset is in standby m
Résumé du contenu de la page N° 16
14 CALLER ID OPERATION Dial back from a Call Log Record 1. Select a call log record (use [ ] keys to delete the digits, but the last 6 digits can’t be deleted) before dial out. 3. Press [ ] or [ ] key, the number is dialed out
Résumé du contenu de la page N° 17
PHONE BOOK 15 The telephone can store up to 25 entries in the phone book Key assignment overview with name and call number. When the function is supported by the telephone provider service and the caller, the Key Capital letter handset displays the name of the caller (when stored in the phone book). 1 1 2 A B C 2 Store Entries 3 1. Press [ ] key to access phone book memory. 4 2. Press [ 5 the stored number. 6 3. Press [ ] key, 7 4. Enter name (ma
Résumé du contenu de la page N° 18
16 PHONE BOOK Edit Entries Delete Entries Press [ ] key to access phone book memory. Press [ ] key to access phone book memory. 1. Press [ 1. Press [ Press [ ] key to select a desired entry, and then Press [ ] key to select a desired entry, and then 2. Press [ ] 2. Press [ 3. Press [ ] key to confirm. 3. Press [ ] key again to confirm. Note: Delete All Entries Press [ ] key to delete any incorrect input. Press [ ] key t
Résumé du contenu de la page N° 19
MENU OPERATION 17 1. Press [ ] key. Alarms press [ ] key. 1. Press [ ] key. press [ ] key. [ ] key. [ ] key. and press [ ] key. the selected melody will sound. ] key, the alarm 6. Press [ ] key to confirm the setting. will be cleared. If you select “SET” and press [ ] , Ring Volume 6. Press [ ] key to confirm. Note: default setting is volume 3. and time will display and alarm sound will stop a
Résumé du contenu de la page N° 20
18 MENU OPERATION Date / Time format Set Date 1. Press [ ] key. 1. Press [ ] key. 3. Press [ 3. Press [ 4. Press [ 4. Press [ 5. Press [ 5. Press [ 6. Press [ 6. Press [ ] key. 7. Press [ ] key to confirm. using the keypad, press [ ] key to confirm the setting. Note:
