Résumé du contenu de la page N° 1
TM
MD4150 Series User Guide
Guide de l'utilisateur de la série MD4150
2.4 GHz Digital Cordless Telephone
Téléphone numérique sans fil à 2,4 GHz
Résumé du contenu de la page N° 2
For product-related questions, please visit us online: www.motorola.com/cordless or call us at: 1-800-461-4575 Canada 1-888-390-6456 TTY (Text Telephone) Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including but not limited to, the implied warranties
Résumé du contenu de la page N° 3
Welcome Welcome Congratulations on your purchase of a Motorola MD4150 Series Cordless Telephone. Take a moment to ensure that your purchase includes each of the items pictured below. i
Résumé du contenu de la page N° 4
MD4150 Series Handset Ringing Status LED Antenna Volume control Earphone jack Access Caller ID/ Access Directory/ Scroll down Scroll up Make/Answer call/ Select menu options/ Switch between Transfer call/ active calls Menu options Switch between End call/ Pulse (rotary)/Tone Cancel command Redial last Mute/delete number called/ caller information Insert Pauses Call second Microphone Handset Switch to hands-free mode ii Welcome
Résumé du contenu de la page N° 5
Welcome Base Unit Locate Handset(s) Handset charging LED Voice mail LED Handset in use LED iii
Résumé du contenu de la page N° 6
Stand Alone Charger Charge LED iv Welcome
Résumé du contenu de la page N° 7
Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Important Safety Instructions . . . . . . . . . . . . . . . . . . . vii Industry Canada (IC) Information . . . . . . . . . . . . . . . . . x Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Battery Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 1 Charging the Battery
Résumé du contenu de la page N° 8
Storing a New Entry . . . . . . . . . . . . . . . . . . . . . . . . 14 Deleting a Phonebook Entry . . . . . . . . . . . . . . . . . 15 Dialing Phonebook Numbers . . . . . . . . . . . . . . . . . 15 Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . 16 Using Caller ID Functions . . . . . . . . . . . . . . . . . . . . . 16 Storing a Caller ID Entry in Memory . . . . . . . . . . . 16 Dialing a Caller ID Listing . . . . . . . . . . . . . . . . . . . . 17 Reviewing Caller ID Lists . .
Résumé du contenu de la page N° 9
Safety Info Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: To reduce the risk of fire and shock: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3. Do not use this product near
Résumé du contenu de la page N° 10
Unplug this cordless phone immediately from an outlet if: • The power cord or plug is damaged or frayed. • Liquid has been spilled into the product. • The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by the unplugged cords. • The product has been dropped or the cabinet has been damaged. • The product exhibits a distinct change in perfor- mance. Installation Guideli
Résumé du contenu de la page N° 11
Safety Info 8. Use only the power supply that came with this unit. Using other power supplies may damage the unit. 9. Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. 10.To avoid interference to nearby appliances, do not place the base of the cordless phone on or near a TV, microwave oven, refrigerator, or VCR. Caution: To maintain compliance with the FCC’s RF exposure guidelines,
Résumé du contenu de la page N° 12
Industry Canada (IC) Information This equipment meets the applicable Industry Canada (IC) radio and terminal equipment technical specifications. This is confirmed by the certification/registration number found on the label on the bottom of the base unit. The abbreviation IC before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity and that the Industry Canada technical specifications were met. It does not imply that I
Résumé du contenu de la page N° 13
Industry Canada (IC) Information For your protection, ensure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. You should not attempt to make such connections yourself. Contact the appropriate electrical inspection authority or an electrician, as appropriate.If your home has specially wired alarm equipment connected to the
Résumé du contenu de la page N° 14
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Industry Canada’s ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
Résumé du contenu de la page N° 15
Getting Started Getting Started Before you can use your new Motorola telephone to make or receive calls, you must charge the batteries. Battery Safety Instructions • Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. • Caution: There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the battery that came with your phone or an authorized replacement recommen
Résumé du contenu de la page N° 16
Charging the Battery Your MD4150 series telephone comes with a Base Unit, and a Stand Alone Charger. Use the Charger to charge one of your two handsets. See “Installation” on page 6 for step-by-step instructions on installing the Base Unit. 1 Remove any stickers if present. 2 Press the indentation on the battery door and slide downwards to remove. 3 Insert the battery (bottom edge first) into the battery compartment. 2 Getting Started
Résumé du contenu de la page N° 17
Getting Started 4 Replace the battery door. 5 Attach the Belt Clip (optional). Note: For initial charge, please charge battery for at least 12 hours. 3
Résumé du contenu de la page N° 18
6 Plug the power cord into the bottom of the Charger and into an electrical outlet. 7 Place the handset in the Charger. Charge LED 8 Charge the battery for at least 12 hours before using for the first time. The glowing LED light indicates that the handset is charging. 4 Getting Started
Résumé du contenu de la page N° 19
Getting Started Handset Overview Use the at-a-glance image below to familiarize yourself with the MD4150 series handset’s display screen. See “Personalizing Your Handset” on page 7 for step-by-step instructions on setting preferences. Main Display Screen Muted Name microphone and number indicator display area Speakerphone Low battery/ indicator charging indicator New call log entry Muted indicator ringer indicator CID date and time information Note: Caller ID information is supplied only if y
Résumé du contenu de la page N° 20
Installation 1 Select a location convenient to both an electrical outlet and a telephone jack. 2 Insert the telephone cord and power cord into the bottom of the Base Unit. 3 Place your second handset into the base unit to charge. Do not plug the telephone cord into the wall jack until the handset is fully charged (12 hours). 4 Plug the telephone cord into the telephone wall jack. 5 Plug the power cord into the electrical outlet. Note: Install the base unit away from electronic equipment
