Résumé du contenu de la page N° 1
User’s Manual
5.8 GHz Cordless
Telephone/Answering
System E5943B/
E5944B
with Caller ID/Call Waiting
Résumé du contenu de la page N° 2
Congratulations on your purchase of this AT&T product. Before using this telephone system, you must read Important safety instructions on pages 52 to 54 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1 (800) 222-3111 In Canada, call 1(866) 288-4268 or visit our website at www.telephones.att.com Model #: E5943B/E5944B
Résumé du contenu de la page N° 3
IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local telephone service provider. Caller ID with call waiting lets you see who is calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your telephone service provider if: • you have both caller ID and call waiting, but as separate ser- vices (you may need com
Résumé du contenu de la page N° 4
You must install and See page 8 charge battery before STOP! for easy instructions. using the telephone. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. Add new handsets to make your phone more versatile (see page 43) Your telephone can accommodate up to four cordless handsets. You can add new handsets (model E597-2, purchased separately) at any time, but each must be registere
Résumé du contenu de la page N° 5
User’s manual 5.8 GHz Cordless Telephone/Answering System E5943B/ E5944B with Caller ID/Call Waiting Table of contents To review the call log ................28 Getting started To return a call ...........................28 Quick reference guide .................2 Parts checklist ..............................4 Answering system Before you begin ..........................6 operation Telephone base installation .........7 Message capacity ........................30 Battery installat
Résumé du contenu de la page N° 6
Getting started Quick reference guide Cordless handset SELECT MENU Caller ID (VCID) Press to scroll down while in menus. Press to display menu, or to select Press to display caller ID information highlighted item from menu or save (see page 28). While entering names an entry. or numbers, press to move the cursor to the left. ^DIR PHONE FLASH Press to scroll up while in menus. Press to display directory entries Press to make or answer a call. (see page 24). While entering During a ca
Résumé du contenu de la page N° 7
Getting started Quick reference guide Telephone base Telephone function keys HANDSET LOCATOR/ INTERCOM...............Press to make handset(s) beep (see page 12), initiate an intercom conversation, transfer or forward a call (see pages 15-17). REDIAL/PAUSE .......Press to activate the speakerphone to dial out the most recently called number. When the speakerphone is already on, press to dial out the most recently called number or press and hold to insert a three second dial
Résumé du contenu de la page N° 8
Getting started Parts checklist for E5943B Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Cordless handsets Cordless handset chargers Power adapter for Power adapters for Battery packs telephone base handset charger Telephone line cord Belt clips Wall mount bracket
Résumé du contenu de la page N° 9
Getting started Parts checklist for E5944B Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Wall mount bracket Telephone base Cordless handsets Belt clips Power adapter for Power adapters for cord- telephone base less handset charger Cordless handset chargers Battery packs Telephone line cord
Résumé du contenu de la page N° 10
Getting started Before you begin About caller identification Telephone operating range Caller ID with call waiting features This cordless telephone operates in this telephone lets you see with the maximum power allowed who’s calling before you answer by the Federal Communications the phone, even when you’re on Commission (FCC). Even so, the another call. These features require handset and base can communi- services provided by your local cate over only a certain distance telephone company.
Résumé du contenu de la page N° 11
Getting started Telephone base installation Install the telephone base as shown below. Choose a location in a central loca- tion within the home and: • away from any other cordless (wireless) device such as cordless telephones, 802.11 wireless router (for example, WiFi). • away from other electronic equipment such as microwave ovens, televisions, computers, etc. Avoid excessive heat, cold, dust or moisture. • if you need to install your phone within the same room as other cordless phones
Résumé du contenu de la page N° 12
Getting started Battery installation & charging After battery installation, place each handset in the telephone base or a charger and allow it to charge for 16 hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 16 hours. The average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is appr
Résumé du contenu de la page N° 13
Getting started Wall mounting The base can be installed on any standard wallphone outlet as shown below. Choose a location away from any electronic equipment, such as personal com- puters, computer routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 1) Connect telephone line cord and power adapter to telephone jacks b b and wall jacks, as shown on page 7. 2) Install wall mount bracket onto set. (a) First put the two front wall mount bracket tabs i
Résumé du contenu de la page N° 14
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into notches on side of handset. Rotate and pull to remove. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. Plug 2.5 mm headset into the jack on the side of handset (beneath small rubber cap). 0
Résumé du contenu de la page N° 15
Telephone operation Elapsed time Basic handset operation PHONE 00:00:12 Making and answering calls To answer an incoming call, press PHONE FLASH or SPEAKER, or any dial pad key (0-9, * or #). To make a call, press PHONE FLASH or SPEAKER, then dial a number. Press OFF CLEAR to hang up. To preview numbers before dialing, enter numbers first, then press PHONE FLASH or SPEAKER to dial. Press MUTE DELETE or OFF CLEAR at any time to make corrections as you are entering numbers. T
Résumé du contenu de la page N° 16
Telephone operation Basic base operation Making and answering calls To answer an incoming call, press SPEAKER, or any dial pad key (0-9, * or #). To make a call, press SPEAKER, then dial a number. Press SPEAKER again to hang up. Speakerphone Last number redial When the base is idle, press REDIAL /PAUSE will activate the speakerphone and dial out the most recently called number
Résumé du contenu de la page N° 17
Telephone operation Options while on calls - handset and base Volume control Press ^ or V on the VOLUME button on the side of the handset or press ^ or V on the VOLUME Volume button on the base to adjust the listening volume levels (1-5, of which 5 is the highest). When you change the volume level, the new set- ting will automatically be saved. Flash Call waiting If you subscribe to a call waiting service with your local telephone service provider, you will hear a beep if someone cal
Résumé du contenu de la page N° 18
Telephone operation Options while on calls - handset and base Mute Press MUTE DELETE to silence the microphone. You will be able to hear the person at the other end, but they will not be able to hear you until you press MUTE DELETE again and resume speaking. Temporary ringer silencing Tone Press OFF CLEAR or MUTE DELETE while the phone Mute is ringing to silence the ringer temporarily. The next phone call will ring normally. Temporary tone dialing If you have pulse dialing (rotary
Résumé du contenu de la page N° 19
Telephone operation Intercom calls Intercom calls If you have more than one handset, use the inter- com feature to have conversations between the handsets and base. • Press the INTERCOM button on a handset or HANDSET LOCATOR/ INTERCOM on the base to initi- ate an intercom call. • After entering the number of the handset (1-4 or 0 for the base) you wish to intercom with, your handset (or base) will call the other hand- Press INTERCOM. set (or base). To answer the intercom call: • At a
Résumé du contenu de la page N° 20
Telephone operation Call forward An external call can be forwarded between the fol- lowing parties: • From one handset to another handset (pur- chased separately). • From a handset to the base. • From the base to a handset. Call forward During a conversation, you can forward the call to another handset or to the base. • Press INTERCOM on the handset or HANDSET LOCATOR/ INTERCOM on the base. FORWARD TO: • Enter the handset number (1-4 or 0 for the base) to which you want to forward the