Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3), property of Fargo Electronics, Incorporated Copyright 2003 by Fargo Electronics, Incorporated. All rights reserved. Printed in the United States of America. Exclusive permission is granted to authorized resellers of Fargo products to reproduce and distribute this copyrighted document to authorized Fargo customers. The revision number for this document will be updated to reflect
Resumen del contenido incluido en la página 3
RESTRICTED USE ONLY Fargo Electronics, Inc. Table of Contents Section 1: Printer Overview _________________________________________________ 1-1 How to use the guide_________________________________________________________________ 1-1 Safety Messages (review carefully)______________________________________________________ 1-2 HDP600 Overview __________________________________________________________________ 1-3 Reviewing the HDP600 Block Diagram_____________________________________________
Resumen del contenido incluido en la página 4
RESTRICTED USE ONLY Fargo Electronics, Inc. Installation Procedures ______________________________________________________________ 3-32 Installing the HDP600 Printer Driver _________________________________________________ 3-32 Printing a Test Print Image ___________________________________________________________ 3-51 Card Lamination Module Installation ___________________________________________________ 3-54 Introduction ___________________________________________________________________
Resumen del contenido incluido en la página 5
RESTRICTED USE ONLY Fargo Electronics, Inc. Using the Clear Changes button _____________________________________________________ 5-25 Using the TCP/IP page ______________________________________________________________ 5-26 Using the TCP/IP Status Web Page __________________________________________________ 5-27 Using the Printer page _______________________________________________________________ 5-28 Using the System Log page___________________________________________________________ 5-30
Resumen del contenido incluido en la página 6
RESTRICTED USE ONLY Fargo Electronics, Inc. Installing Printer Driver Updates ____________________________________________________ 7-10 Setting Up the Printer Driver__________________________________________________________ 7-11 Setting up Windows 2000/Windows XP ______________________________________________ 7-11 Using the Card tab (HDP600/HDP600-LC) ______________________________________________ 7-12 Using the Card tab (HDP600 CR100/HDP600-LC CR100) __________________________________ 7-1
Resumen del contenido incluido en la página 7
RESTRICTED USE ONLY Fargo Electronics, Inc. Adjusting the Transfer Dwell Time and Transfer Temperature _____________________________ 7-71 Selecting the Sensors button and Defaults button________________________________________ 7-71 Selecting the Sensors button and Defaults button________________________________________ 7-72 Section 8: Cleaning________________________________________________________ 8-1 Table of Contents ___________________________________________________________________ 8-
Resumen del contenido incluido en la página 8
RESTRICTED USE ONLY Fargo Electronics, Inc. Section 12: Firmware Updates ______________________________________________ 12-1 Firmware Updater Application Program _________________________________________________ 12-1 Downloading Firmware Updates_______________________________________________________ 12-3 Updating the Printer's Firmware _______________________________________________________ 12-4 Updating the Main Firmware _______________________________________________________ 12-4 Updati
Resumen del contenido incluido en la página 9
RESTRICTED USE ONLY Fargo Electronics, Inc. Section 1: Printer Overview How to use the guide The HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) is designed to provide installers and technicians with quick, efficient lookup of related procedures, components and terms. The Guide can be used effectively either in soft or hard copy, depending on the preference of the installer or technician. Manual Description Glossary of Terms and You can go directly to the Glossary of T
Resumen del contenido incluido en la página 10
RESTRICTED USE ONLY Fargo Electronics, Inc. Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indicated by a warning symbol (as shown to the left). To prevent personal injury, refer to the following safety messages before performing an operation preceded by this symbol. To prevent personal injury, alw
Resumen del contenido incluido en la página 11
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 Overview Reviewing the HDP600 Block Diagram The HDP600 Block Diagram will be created and added to this service document at a future date. Motors Sensors Parts 1 Card Input 13 Thermocouple 32 Flattener Cooling Fan 2 Card Feed Stepper 14 Film Supply Encoder 33 Lamination Roller 3 Flipper Stepper 15 Film - Print 34 Platen Roller 4 Lamination 16 Ribbon Sensor Array 35 Printhead Stepper 5 Print Stepper 17 Ribbon Encoder
Resumen del contenido incluido en la página 12
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the HDP600 Sequence of Operations The following sequence describes a dual sided full color print job with magnetic encoding. (Note: The HDP625/625-LC Printers have two (2) Card Input Hoppers that load 100 cards in each Hopper.) Step Process 1 The File information is received from the PC. 2 The Heater warms up and/or maintains the heat on the hot Roller using the Thermocouple to help maintain the desired temp. 3 The DC Motor and St
Resumen del contenido incluido en la página 13
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing HDP 600 Series Card Printer - Sequence of Operations (continued) Step Process 12 The Fan turns ON as required to keep head cool. 13 The Ribbon Drives, Film Drive and Print Platen Stepper turn ON and the Printhead burns the image data until the image data is depleted. All stop. (Note: The Ribbon Encoders and Film Encoders are active during this step.) 14 The Headlift Motor engages, moving the Printhead up until the Headlift Sensor is
Resumen del contenido incluido en la página 14
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing HDP 600 Series Card Printer - Sequence of Operations (continued) Step Process 23 The Film/Ribbon Drives and Print Platen Stepper turn ON to advance the printed portion of the Film into position at the heated Lam Roller Stepper Motor, using the Lamination Film Alignment Sensor. 24 The Headlift Motor engages, moving the Printhead up until the Headlift Sensor is activated. All stop. (Note: This step is not performed after the last Colo
Resumen del contenido incluido en la página 15
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the HDP600 Boot up Sequence Step Process 1 The Card feed stepper turns ON (to check for a card on the Flipper table). 2 The Lam Headlift turns until the head up position is returned from the Headlift Sensor). 3 The Film transfer take-up Motor turns ON to take up any slack in the film. 4 The Print Headlift turns until head up position is returned from Headlift Sensor. 5 The Print Ribbon moves forward until it finds the yellow panel, p
Resumen del contenido incluido en la página 16
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Lamination Module Sequence of Operations The LAM sequence of operations begins after printing has occurred with the Card Printer. Step Process 1 The card is fed onto the Lamination Module Flipper Table. 2 The card is fed to the Card Position Sensor. 3 The Lamination Ribbon Motor begins cycling until the Lamination Sensor detects the mark. 4 The Card Feed Motor activates to center the card on the Platen Roller. 5 The Lamination
Resumen del contenido incluido en la página 17
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Lamination Module Sequence of Operations (continued) Step Process 6 The Card Feed Motor and the Lamination Ribbon Motor activate for the length of the card. 7 The Lamination Roller Lift Motor cycles until the Lamination Roller Lift Sensor detects state change. 8 The card is fed back to the Flipper Table. 9 The Flipper Table Clutch engages. 10 The Flipper Table Motor activates until the Card is inverted based on the Flipper off
Resumen del contenido incluido en la página 18
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Lamination Module Boot up Sequence Step Process 1 The Lamination Headlift turns until the head up position is returned from Headlift Sensor. 2 The Lamination Ribbon Motor activates to determine the presence of a roll of lamination. 3 The Lamination Flipper table homes itself. 4 The Card Sensor checks for the presence of a card and ejects it if found. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 1-10
Resumen del contenido incluido en la página 19
RESTRICTED USE ONLY Fargo Electronics, Inc. Section 2: Specifications The purpose of this section is to provide the User with specific information on the Regulatory Compliances, Agency Listings, Technical Specifications and Functional Specifications for the HDP600, HDP600-LC, HDP600 CR100 and HDP600-LC CR100 card Printers. Table of Contents Section 2: Specifications 2-1 Table of Contents 2-1 Safety Messages (review carefully) 2-2 Introduction 2-3 Reviewing the HDP600 Printer Overview
Resumen del contenido incluido en la página 20
RESTRICTED USE ONLY Fargo Electronics, Inc. Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indicated by a warning symbol (as shown to the left). To prevent personal injury, refer to the following safety messages before performing an operation preceded by this symbol. To prevent personal injury, al
