Manual de instrucciones de Rangemaster LEIHDC70BB

Resumen del contenido incluido en la página 1

LEIHDC70SC - LEIHDC70BB
LEIHDC70BC


Instructions Manual



www.rangemaster.co.uk

Resumen del contenido incluido en la página 2

EN INDEX RECOMMENDATIONS AND SUGGESTIONS......................................................................................................................3 CHARACTERISTICS..............................................................................................................................................................4 INSTALLATION ................................................................................................................................................

Resumen del contenido incluido en la página 3

RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from in- correct or improper installation.  The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please re- fer to

Resumen del contenido incluido en la página 4

CHARACTERISTICS Dimensions   
   Components
 


Ref. Q.ty Product Components
1 1 Hood Body, complete with: Controls, Light, Blower, Filters  2 1 Telescopic Chimney comprising:  2.1 1 Upper Section 2.2 1 Lower Section 
8a 1 Right Air Outlet Grill 8b 1 Left Air Outlet Grill
  9 1 Reducer Flange ø 150-120 mm   10 1 Adapting ring ø 120-125 mm  15 1 Air Outlet Connection
 17 2 Lower Chimney Fixing Bush
  Ref. Q.ty Installa

Resumen del contenido incluido en la página 5

INSTALLATION Wall drilling and bracket fixing 
    Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed.  Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at height H (height of the visible part of the panel) for installation with the back panel.  Place bracket 7.2.1 on the wall as shown ab

Resumen del contenido incluido en la página 6

Mounting the hood body
  Screw the two screws 12d supplied onto the brackets 7.1.  Hook the hood body onto the bracket 7.1, centring it around the vertical line.  Use the adjusting screws 12d underneath the hood to level the 
hood body. Connections DUCTED VERSION AIR EXHAUST SYSTEM  
   When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 125 mm, the choice of which is left to the installer.    To

Resumen del contenido incluido en la página 7

ELECTRICAL CONNECTION  Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm.  Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan. Chimney assembly 
Upper chimney section  Slightly widen the two sides of the upper chimney and hook
 
them behind the brackets 7.2.1, making sure that they are prop- erly housed. 

Resumen del contenido incluido en la página 8

USE    L Light Switches the lighting system on and off M Motor Switches the extractor motor on and off V Speed Sets the operating speed of the extractor: 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour. 2. Medium speed, suitable for most operating conditions given the optimum treated air flow/noise level ratio. 3. Maximum speed, used for eliminating the highest cooking vapour emis- sion, including long periods.

Resumen del contenido incluido en la página 9

MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS  The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher.  Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time.  Wash the filters, taking care not to bend them. Allow them to dry before refitting.  When refitting the filters, make sure that the handle is visible

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12

AGA RANGEMASTER GROUP PLC 4329645_ver7